|
| 1 | Site Clerance including labour and matrials and including grass cutting/Dressing and carrage of matrials by Head load |
| 2 | Dismenteling CC or granolithic floor with all comp S.I.No-697 |
| 3 | E/W filling in embankment with cartage soil up to 8.00 km distances etc com |
| 4 | E/W in Excavation in ordenery soil in foudation including labour and matrials and T/P with all com. Work SI No. 251 |
| 5 | C.C. Work in 1:6:12 in cement, fine sand and 40 mm Gauge Brick Ballast including labour and matrials, T/P with all com. Work Sl No. 273 |
| 6 | RCC work for slab with cement approved coarse sand & 20mm gauge dala stone grit in the proportion of 1:1.5:3 S.I. No. 288 |
| 7 | MS work in R.C.C. work including labour and matrials, T/P with all com. Work SI No.504 |
| 8 | M-150 B/W in 1:4 in cement and coar sand mortar including labour and matrials, T/P with all com. Work SI No.305 |
| 9 | S/F of murga jali with all comp work. |
| 10 | P.C.C. Work in 1:2:4 in cement, Coarse sand and 20 mm GaugeStone grit including labour and matrials, T/P with all com. Work Sl No. 279(B) |
| 11 | 12mm thick Plaster work in 1:3 in cement and fine sand mortar including labour and matrials, T/P with all com. Work SI No.583 |
| 12 | MS work in Grill, Gate including labour and matrials, T/P with all com. Work Sl No.503 |
| 13 | Scraping of old painting and colour white wash with disposal of refusedas directing by engineer with distance 6 mtr. |
| 14 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.8 |
| 15 | Finishing walls with water proofing cement paint of required shade: 13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm) 13.44 |
| 16 | P/L of 80 mm thick plain interlocking cement concrete Paver blocks, Work SI No. |
| 17 | S/F of Internal Electrification & Plumbering & Water storage tank Work T/P with all com. |
| 18 | Painting of Iron Work in Large Areas in one Coat of ready mix paint primer and one coat approved paint etc all comp. SOR No. 658 |
| 19 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. DSR 10.28 |
| 20 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Sqm 19 Size of Tile 600x600 mm. D S.R 2021 11.46.2 |
| 21 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (DSR 17.31)2018 |
| 22 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 |
| 23 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including |
| 24 | P/F water closet squatting pan (indian type W.C. pan) with 100mm sand cost iron P or S trap10 litre low level white P.V.C flushing cistern with manually controlled device (handle level )confirming to IS 7231, with all comp work etc with all comp S.No-17.1.1 |
| 25 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) DSR2021-20.3.2 |
| 26 | Shifting of all material by head load with all comp work. |
| 27 | Add 18% GST Please Enable Macros to View BoQ information |