Name of Work:- CONSTRUCTION OF NEW PREFABRICATED EMEERGENCY AND CASUALTY WING AND SEPARATE LABORATORY SECTION IN TO CIVIL HOSPITAL KANGRA (SUB HEAD CONSTRUCTION OF CIVIL WORK(DEPOSIT WORK) | Sl. No. | Item Description | |
| 1 | Excavation in foundations, trenches etc., in earth work, lift upto 1.50 Metres stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres. Pick and Junper work and as per the direction of the Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. | | 2 | Providing and laying in position cement concrete 1:4:8 ( 1 cement : 4 sand : 8 stone aggregate ) 40 mm nominal size of specified grade excluding the cost of centering and shuttering - All work up to plinth level and as per the direction of the Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. | | 3 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : in Cement mortar 1:6 (1 cement : 6 coarse sand) and as per the direction of the Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. | | 4 | Providing and laying Coursed ( Squared) rubble masonry (first sort) with hard stone in foundation and plinth with :in Cement mortar 1:6 (1 cement : 6 coarse sand) and as per the direction of the Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. | | 5 | Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girder , bressumers and cantilevers as per the direction of the Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. | | 6 | Centering and shuttering including strutting, propping etc. and removal of form for : Shelves (Cast in situ) and as per the direction of the Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. | | 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size). as per the direction of the Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. | | 8 | Providing Mild Steeland Tor steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level to two floor level and as per the direction of the Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. | | 9 | Stone filling under the flooe including curing and carraige of material as per the direction of the Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. | | 10 | Providing and laying in position cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate) 40 mm nominal size) of specified grade excluding the cost of centering and shuttering - All work up to plinth level : as per the direction of Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. | | 11 | Providing and laying Duro stone vetrified tiles (300x300mmx10mm) in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete and as per the direction of the Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. | | 12 | Providing and laying Duro stone vetrified tiles (300x300mmx8mm) in grey/coloured of required shade in skirting risers of steps and dados on 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete and as per the direction of the Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. | | 13 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick ( 20 mili metre )base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc.complete at all levels and as per the direction of the Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. | | 14 | Brick work using Second Class common burnt clay building bricks in Founation and plinth level in cement mortar 1:6 (One cement isto six sand) and curing complete including carriage of material within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. | | 15 | Providing and fixing aluminium work for frame of doors, windows, ventilators and galazed partitions (for fixed portion) of Jindal / Hindalco aluminium with extrusion built up standard tubulars section / appropriate Z sections and other sections of approved make conforming to IS 733 and IS: 1285 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade with dash fastners of required dia and size, including necessary filling up of gaps at junctions i.e. at top, bottom and sides with required EPDM rubber / neoprence gasket etcetera. Aluminium sections shall be smooth, rust free, staight, mitred and jointed mechnically where ever required including cleat angle, aluminium, snap beading for glazing / panelling C.P. brass / stainless steel screws all complete as per architectural drawings design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. | | 16 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm) all complete as per architectural drawings design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. | | 17 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete and as per the direction of the Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. | | 18 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete and as per the direction of the Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. | | 19 | Providing and fixing aluminium tower bolts 250X10MM ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. | | 20 | Providing and fixing aluminium tower bolts 150X10MM ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. | | 21 | Providing and fixing aluminium handles, 125 MM ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete and as per the direction of the Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. | | 22 | Providing and fixing aluminium handles,100 MM ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete and as per the direction of the Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. | | 23 | Providing and fixing aluminium hanging floor door single rubber stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete and as per the direction of the Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. | | 24 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer- in-charge. (Only weight of grill to be measured for payment) and as per the direction of the Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. | | 25 | Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of : (Note:- Butt hinges and necessary screws shall be paid separately) and 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT- I or graded wood particle board FPT- I, conforming to IS : 3087, bonded with BWP type synthetic resin adhesive as per IS : 848 and pre- laminated conforming to IS : 12823, Grade 1, Type - II marked :and as per the direction of the Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. | | 26 | 15mm (Fifteen milimetres) thick cement plaster in single coat on rough side of brick / concrete /stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand), within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. | | 27 | 15mm (Fifteen milimetres) thick cement plaster in single coat on fair side of brick/concrete/ stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand), within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. | | 28 | Applying Birla / J.K white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. | | 29 | Distempering two coat with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification as per the direction of Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. | | 30 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required s per the direction of Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. | | 31 | Providing and fixing 0.60mm thick prepainted steel sheet in roofing withhot dipped metallic zinc coated sheetwith top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with allaccesoriees as required as per the direction of Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. | | 32 | Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board / facia/ soffits /ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. | | 33 | Providing and fixing flushing 38cm overall with 0.60mm thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polysterorganic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required and as per the direction of Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. | | 34 | Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee havin g height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring as per the direction of Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. | | 35 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture as per the direction of Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. as per the direction of Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. | | 36 | Providing and fixing Size 600x450x200 mm ( Six hundred in to four hundred fifty into two hundred Mili imetre )white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : as per the direction of Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. Please Enable Macros to View BoQ information |
|