|
| 1 | Earthwork in excavation in foundation in ordinary soil including lift upto 1.5mt and lead upto 30mt etc all complete. |
| 2 | Providing and laying cement concrete in 1:4:8 (1 cement : 4 fine sand : 8 Brick ballast 40mm nominal size) |
| 3 | Class 150 b/w in 1:4 cement and c.sand…..complete item ) |
| 4 | 12 mm thick plaster 1:4 cement and coarse sand mortor ………………etc all complete |
| 5 | Finishing Wall with water proof cement paint of approved quality such as super \\"snowcem durocem\\" super quality required shade on undecorated wall surface to give an even shade after thoroughly brushing the surface. |
| 6 | Providing and Fixing of Stainless Steel (Grade 304) railling made of hollow tubes,channel,plates including drilling holes,revetting or welding where nessessary and also including supply of steel ….complete item DSR NO.10.28 |
| 7 | Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours). Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge (Dsr- 16.59.1) |
| 8 | Water cooler |
| 9 | Stablizers |
| 10 | Aquaguard UV water purifire |
| 11 | Wiring point of water cooler,Electric wires main switch & material etc. |
| 12 | Supply of 110 mm PVC Pipe(6 kg/cm2 ) ISI Mark etc all Comp. |
| 13 | Supply of 32 mm GI Pipe etc all Comp. |
| 14 | Boring Work With all Lab, T&P etc all Comp. |
| 15 | (A) 0 to 30 BGL |
| 16 | (B) L 30-60 |
| 17 | (C) L 60-90 |
| 18 | Lowering & Jointing of PVC Pipe with all Lab, T&P etc all Comp. |
| 19 | (A) 0 to 30 BGL |
| 20 | (B) 30 to 60 BGL |
| 21 | Lowering of Submersible Pump Set with Cable Jointing with Lab, T&P etc all Comp. 1 H.P |
| 22 | Supply of following Item for Proper Completion of work. |
| 23 | Supply of 1.00 H.P.KSB make oil filled single phase submersible motor pump set, discharge 20000 Ltr/h at the head of 45 meter etc including supply of suitable submersible cable & wire rope etc all complete |
| 24 | Cable 2 core (copper) |
| 25 | Cable 2 core (copper) |
| 26 | Clamp 4” GI |
| 27 | Clamp 32 mm GI |
| 28 | Solution |
| 29 | Screw |
| 30 | Bush 32 mmx40mm |
| 31 | Socket |
| 32 | Nipple 12mmx 32 mm |
| 33 | Boring cap |
| 34 | Gate valve |
| 35 | Nut bolt |
| 36 | Elbow 32 mmmx25mm |
| 37 | Nipple 150 mm x 25mm |
| 38 | (P) Supply & Fixing of starter with board etc all complete as directed by sie i/c 1 H.P |
| 39 | Supply of GI pipe for fitting of water tank T&P due to water supply |
| 40 | (A) GI Pipe 32mm |
| 41 | (B) GI pipe 25mm |
| 42 | (C) GI pipe 15mm |
| 43 | Supply & fitting of Bib cock mark etc all comp. Please Enable Macros to View BoQ information |
