Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I. (Vide SOR Item No. 5.1.1 BCD) |
| 2 | Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B) (Vide SOR Item No. 5.1.2 BCD) |
| 3 | Earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume) (Vide SOR Item No. 5.1.7 BCD) |
| 4 | Filling in foundation trenches and plinth in layers. Not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I (Mode of measurement compacted volume) (Vide SOR Item No. 5.1.8 BCD) |
| 5 | Carriage of Item no.-5.1.8 upto 1km |
| 6 | Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) (Vide SOR Item No. 5.1.10 BCD) |
| 7 | Providing designation 75B brick work in C.M (1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I. (Vide SOR Item No. 5.2.6 BCD) |
| 8 | Providing randam rubble stone masonry in CM (1:4) in foundation and plinth with hammer dressed stone of less than 0.03 M3 in volume and clean coarse sand of F.M. 2 to 2.5 including cost of screening raking out joints to 20 mm depth, curing taxes and royalty all complete as per building specification and direction of E/I. 5.2.28 |
| 9 | Providing designation 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9\\"x4.5\\"x3\\") in C.M. (1:6) in foundation and plinth with approved uality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. (Vide SOR Item No. 5.2.52 BCD) |
| 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) (Vide SOR Item No. 5.3.1.2 BCD) |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) (Vide SOR Item No. 5.3.1.4 BCD) |
| 12 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 13 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) (Vide SOR Item No. 5.3.9.1 BCD) |
| 14 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) (Vide SOR Item No. 5.3.10 BCD) |
| 15 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). (Vide SOR Item No. 5.3.11 BCD) |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form forFoundations, footings, bases of columns, etc. for mass concrete (Vide SOR Item No. 5.3.17.1 BCD) |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form forSuspended floors, roofs, landings, balconies and access platform. (Vide SOR Item No. 5.3.17.3 BCD) |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form forLintels, beams, plinth beams, girders, bressumers and cantilevers. (Vide SOR Item No. 5.3.17.5 BCD) |
| 19 | Centering and shuttering including strutting, propping etc. and removal of form forColumns, Pillars, Piers, Abutments, Posts and Struts. (Vide SOR Item No. 5.3.17.6 BCD) |
| 20 | Centering and shuttering including strutting, propping etc. and removal of form for-Weather shade, Chajjas, corbels etc., including edges |
| 21 | Supplying, fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. 5.4.32 |
| 22 | Providing Tor steel reinforcement of 8mm dia. rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 {only valid for Tata (Tiscon),SAIL, JSPL, Electrosteel ltd. Bokaro and Vizag (RINL)} (Vide SOR Item No. 5.5.4 BCD) |
| 23 | Providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia. bars as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. (a) 10mm (TMT coil Fe 500) {only valid for Tata (Tiscon),SAIL, JSPL, Electrosteel ltd. Bokaro and Vizag (RINL)} (Vide SOR Item No. 5.5.5 (a) BCD) |
| 24 | Providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. (b) 12mm & 16mm (TMT coil Fe 500) {only valid for Tata (Tiscon),SAIL, JSPL, Electrosteel ltd. Bokaro and Vizag (RINL)} (Vide SOR Item No. 5.5.5 (b) BCD) |
| 25 | Supplying, and fixing fan hook of 16mm dia M.S. bar 1 meter long bent to required size and shape , placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I. (where materials is not supplied by the deptt.) 5.5.13 |
| 26 | Supplying, fitting and fixing M.S. grill gate with M.S. grill made of 20X6mm M.S. flats or 16mm M.S. square bars fitted on 25X25X6mm M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. 5.5.30 |
| 27 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. 5.6.3 |
| 28 | Providing and laying 25mm thick kotah stone tiles in risers of steps skirting and pillars of approved size texure and colour laid over 12mm thick cement mortar (1;30 and joined with grey cement slurry mixed with pigment to match the shade of the slab including rub bing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I. 5.6.20 |
| 29 | Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm. (Vide SOR Item No. 5.6.28 BCD) |
| 30 | Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. 5.7.2 |
| 31 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. 5.7.3 |
| 32 | Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. 5.7.6 |
| 33 | Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I. 5.7.11 |
| 34 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface includingpreparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. 5.8.21 |
| 35 | Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I. 5.8.24 |
| 36 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification) 5.8.41 |
| 37 | Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. 5.8.43 |
| 38 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly, scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. 5.8.45 |
| 39 | Water proofing for Old and New Roof Slab :- Providing and laying water proofing treatment on roof slab by applying two Component, factory designed, ready to use, acrylic modified flexible 5.12.1 |
| 40 | Covering of treated surface with PCC :- Providing 25 mm thick Cement Concrete M20(1:1.5:3) maintaining slope in alternate 2 mt x 2 mt panels with aaproved quality of stone chips of 20 mm 5.12.2 |
| 41 | Providing and filling of 6 mm thick Groove between 25 mm PCC Panels with Polysulphide Sealant (Poring Grade)as Per drawings and technical specifications and direction of E in Charge (with 18% GST Polysulphicle Fosroc-Thoflex 600. Dr Fixit Pidiseal PS(42P) !MraYndK -Seikaal PS or Euivalent. 5.12.8 |
| 42 | Excavation for roadway in hard rock (blasting prohibited) with rock breakers including breaking rock, loading in tippers and disposal within all lifts and lead upto 1000 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections.RCD 3.08 (A) |
| 43 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red (Area of slab over 0.50 sq) DSR8.2.2.2 |
| 44 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (Granite work) DSR8.3.2 |
| 45 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. DSR8.32 |
| 46 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile),appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealant shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. DSR 9.147.E 3.2 |
| 47 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. DSR10.2 |
| 48 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressedmild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineerin-charge: Profile E, Fixing with adjustable lugs with split end tail to each jamb DSR10.14.3.1 |
| 49 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes DSR10.16.2 |
| 50 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works D.S.R10.25.2 |
| 51 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). DSR10.28 |
| 52 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (110mm diameter). (Vide SOR Item No. 12.41.2 DSR) |
| 53 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.. (Coupler 110mm). (Vide SOR Item No. 12.42.1.2 DSR) |
| 54 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.. (Bend 87.5° 110mm bend). (Vide SOR Item No. 12.42.5.2 DSR) |
| 55 | Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110mm Shoe D.S.R 12.42.6.2 |
| 56 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. (110MM) D.S.R 12.43.2 |
| 57 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. DSR 13.26 |
| 58 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm DSR 13.45.1 |
| 59 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80 |
| 60 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. RCD 4.23 (B) |
| 61 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall. 25 mm nominal dia Pipes D.S.R18.7.3 |
| 62 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall. 32mm nominal dia Pipes D.S.R18.7.4 |
| 63 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I (20 mm nominal dia) D.S.R18.8.2 |
| 64 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I (25 mm nominal dia) D.S.R18.8.3 |
| 65 | Point wiring in PVC conduit, with modular type switch:- Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq. mm FR PVC insulated copper conductor single core in surface/recessed PVC conduit with modular switch, modular plate suitable GI box etc as required. Group B (Vide SOR Item No. 1.3.2 Electrical) |
| 66 | Point wiring in PVC conduit, with modular type switch:- Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq. mm FR PVC insulated copper conductor single core in surface/recessed PVC conduit with modular switch, modular plate suitable GI box etc as required. Group C (Vide SOR Item No. 1.3.3 Electrical) |
| 67 | Power plug wiring in PVC conduit (2 x 4 sq. mm) :- Wiring for light/power plug with 2 x 4 sq. mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, along with 1 No. 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing etc as required. (Vide SOR Item No. 1.5 Electrical) |
| 68 | Circuit/submain wiring in PVC conduit:- Wiring for circuit/ submain wiring along with earth wire with the following size of FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit as required. (2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire) (Vide SOR Item No. 1.7.1 Electrical) |
| 69 | Circuit/submain wiring in PVC conduit:- Wiring for circuit/ submain wiring along with earth wire with the following size of FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit as required. (2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire) (Vide SOR Item No. 1.7.2 Electrical) |
| 70 | Circuit/submain wiring in PVC conduit:- Wiring for circuit/ submain wiring along with earth wire with the following size of FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit as required. (2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire) (Vide SOR Item No. 1.7.3 Electrical) |
| 71 | Circuit/submain wiring in PVC conduit:- Wiring for circuit/ submain wiring along with earth wire with the following size of FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit as required. (2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire) (Vide SOR Item No. 1.7.4 Electrical) |
| 72 | S/F PVC/G.I. boxes :- Supplying and fixing of following sizes of PVC / G.I box on surface / recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. (75 mm x 75mm x 50mm deep/ (4\\" x 4\\")) |
| 73 | S/F PVC/G.I. boxes :- Supplying and fixing of following sizes of PVC / G.I box on surface / recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. (72 mm x 146mm x 48mm deep/ (4\\" x 7\\") |
| 74 | S/F PVC/G.I. boxes :- Supplying and fixing of following sizes of PVC / G.I box on surface / recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. (210 mm x 206mm x 48mm deep/ (10\\" x 12\\") |
| 75 | S/F Modular type switch/ socket:- Supplying and fixing of following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (5/6 amps, one way switch) (Vide SOR Item No. 1.24.1 Electrical) |
| 76 | S/F Modular type switch/ socket:- Supplying and fixing of following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (5/6 amps, 3 pin socket outlet) (Vide SOR Item No. 1.24.4 Electrical) |
| 77 | S/F Modular type electronic fan regulator:-Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required. |
| 78 | S/F light plug point with piano type accessories :Supplying and fixing sutiable size G.I./PVC box on surface or in recessed with phenolic laminited sheet cover in front including providing and fixing 3 pin, 5/6 amps socket outlet and 5/6 amps piano type switch connection, painting etc, as requried. (For light plugs to bc uscd in non rrsidmtial buildings ) |
| 79 | S/F light plug point with modular type accessories :- Supplying and fixing suitable GI box with modular plac and cover in front on surface of in recess, including providing and fixing 3 pin 5/6 ampsmodular socket outlet and 5/6 amps modular switch. corutection, paintingetc. as required (For light plugs to be used in non residential buildings) |
| 80 | S/F celling rose :- Supplying and fixing 2 pin 5 amp. Celling rose on the existing junction box/ wooen block including connection etc. as requried. |
| 81 | S/S/F Batten holder :-Supplying and fixing battrn / angle holder including connection etc as requried. |
| 82 | ITC celling fan :- Installation, testing and commissioning of celling fan, including wiring the down rods of standerd leanth (upto 30 mm) with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as requried. |
| 83 | S/F rewireable double pole/TP&N switch disconnector:- Providing and fixing following capacity doble pole / TP&N sheet metal switch disconnector fuse unit in existing metal board with rewireable type fuses, including drilling holes in metal board, making connections, etc as requried. 32 amps, double pole |
| 84 | S/F rewireable double pole/TP&N switch disconnector:- Providing and fixing following capacity doble pole / TP&N sheet metal switch disconnector fuse unit in existing metal board with rewireable type fuses, including drilling holes in metal board, making connections, etc as requried. 32 amps, TP&N |
| 85 | S/F HRC fuse type TP&N switch disconnector :- Providing and fixing following TP&N discorurector fuse switch unit in the existing metal board with ISI marked HRC fuses including drilling holes in metal board, making connections etc. as required. 200 amps, TP&N, HRC |
| 86 | S/F HRC fuse type TP&N switch disconnector :- Providing and fixing following TP&N discorurector fuse switch unit in the existing metal board with ISI marked HRC fuses including drilling holes in metal board, making connections etc. as required. 400 amps, TP&N, HRC |
| 87 | S/F Busbar chamber :- Providing and fixing following capacity busbar chamber with 4 strips of length 300mm made of copper suitable for following capacity complete with all accessories including connections, earthing the body etc. as required. 400 amps |
| 88 | S/F Panel mounted changeover :- Providing and fixing following capacity 4 pole ON-load panel mounted changeover switches in existing cubical panel board, making connection, earthing the body etc. as required. 400 amps, 4 pole |
| 89 | S/F S.P. MCB DB : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, compiete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way, Single door |
| 90 | S/F S.P. MCB DB : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, compiete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way, Double door |
| 91 | S/F 'B'serise, S.P.MCB:- Suppling and fixing 6amps to 32 amps rating , 240 volts, 10 KVA, 'B' curve, miniature circuit breaker suitable for inductive loads of folling poles in the existing MCB DB complete with connections, testing and commissioning et. as requried. 6/32amps, single Pole,\\"B\\" serise |
| 92 | S/F \\"C\\" series, MCB:- Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (6/32 amps, Single pole) (Vide SOR Item No. 2.12.1 Electrical) |
| 93 | S/F \\"C\\" series, MCB:- Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (6/32 amps, SPN) (Vide SOR Item No. 2.12.3 Electrical) |
| 94 | S/F \\"C\\" series, MCB:- Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (40 amps, DP) (Vide SOR Item No. 2.12.6 Electrical) |
| 95 | SIF SPN RCCB :- Supplying and fixing following rating & double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having sesitivity current 30 milli amps in the existing MCB DB complete with connections, testing and commisioning etc. as required. l6/25 amps |
| 96 | P/F M.V. danger notice plate:-Providing and fixing M.V danger notice plate of 200mm x 150mm, made of mild steel, at least 2mm thick and vitreous enamelled white on both sides and with inscription in single red colour on front side as requried. |
| 97 | Earthing with copper earth plate 600mrn x 600mm x 3mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required. |
| 98 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 99 | S/L 25mm x6mm G.I. earth strip in ground :-Providing and laying earth connection from earth electrode with 6 SWG dia. G.L Wire in l5mm dia G.I. pipe from earth electrode, as required. |
| 100 | Supply installation, testing and commissioning of following size ceiling fan 3 Blades confirming to IS:374:2019 including wiring the down rod of standard length (upto 30cm) with 1.5sq.mm. FR PVC insulated, copper wire suitable for 230V 50Hz, single phase supply etc. complete as required. (1200mm 48\\" Ceiling Fan) (Vide SOR Item No. 9.4.1 Electrical) |
| 101 | S.I.T.C. of following rating surface mounted LED tube light fitting suitable for 230V 50Hz, single phase supply etc. complete as required. (20/22W LED Tube light) (Vide SOR Item No. 9.5.2 Electrical) |
| 102 | S.I.T.C. of following rating LED Post top lamp made in die cast aluminium housing with decorative clear/opal acrylic diffuser on existing pipeincluding connection with 1.5sq.mm. copper conductor etc all complete asrequired. 40/45W LED Post top lamp clear |
| 103 | S.I.T.C of following rating approved make LED Bollard fitting with rectangular shape of height 600 to 850mm power input-8/9 watt with die cast aluminium housing opel with PC diffuser, lP:65/54 protection conferming to IS:10322 part 5 etc. all complete as required. (excluding plinth charge) |
| 104 | S.I.T.C of following rating approved make LED Bollard fitting with cylindrical shape of height 600 to 850mm power input-8/9 watt with die cast aluminium housing opel with PC diffuser, lP:65/54 protection conferming to IS:10322 part 5 etc. all complete as required. (excluding plinth charge) |
| 105 | Supply LED FLOOD LIGHT 120 W |
| 106 | Supply 15/16W LED BULB |
| 107 | Heavy duty, armoured electrical cable with aluminium conductor for working voltage up to and including 1100 volts. (Conforms to IS:1554, part-1) 10 sq. mm 4 core. |
| 108 | Polythene water storage tank of make with cover and suitable locking system in double layer confirming to IS: 12701-1996 with latest revision. (Vide SOR Item No. M-079 DWSD) |
| 109 | Providing and supplying High Density Polyethyene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 sutable ford water supply which is available in all standard, like ISI-4984, ISO - 4427 DIN-8074 and various grades like PE-63, PE-80, PE-100 and newly invented PE 100+ materials rates are exfactory B - HDPE pipe of materials grade PE80- PN10 (dia in mm) 25 mm dia. |
| 110 | Providing and fixing male ended 15mm dia brass bib cock of approved quality (wt. not less than 350 gms.) with extra socket all complete as per direction of E/I. |
| 111 | Providing and fixing brqass/C.I. stop cock of approved quality allcomplete as per specification and direction of E/I. (A)BRASS STOP COCK (a)15mm dia. |
| 112 | Providing and fixing brqass/C.I. stop cock of approved quality allcomplete as per specification and direction of E/I. (A)BRASS STOP COCK (c)25mm dia. |
| 113 | Providing and fixing brqass/C.I. stop cock of approved quality allcomplete as per specification and direction of E/I. (A)BRASS STOP COCK (d)32mm dia. |
| 114 | Supply materials labour for constraction of 600x600x90mm stop cock chamber of brick masonary with 125mm thick work of designation 75B in cement mortar (1:6) with 12mm thick cement plaster in C.M. (1:6) on inside only having 50mm thick R.C.C. cover having 12mm dia lifting rings, 2 nos. stop cock chamber will rest over 80mm thick P.C.C. (1:3:6) over 1 brick flat soling, including cost of earth work, all complete job, as per approved design, specification and direction of E/I. 3.1.28 DWSD |
| 115 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment). 60.0% area of total x 300mm. |
| 116 | Supplying and stacking of well decayed cow dung manure at site including loading unloading and carriage for 1km lead. 60.0% area of total x75mm |
| 117 | Fine dressing the trenched ground including breaking clods (40.0% area of total) |
| 118 | Spreding of sludge dump manure or / and good earth in required thickness including carriage thickness including carriage of materials for lead upto 500m and loading unloading and stacking as per direction of Engineer in charge (cost of sludge dump manure or/and good earth to be paid separately) (Qty. 422.10 cu m + 105.53 cu m.)=527.63) |
| 119 | Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. |
| 120 | Digging holes in ordidinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by valume (2parts of stacked volume of earth after reduction by 20%:1part of stacked volume of manure after reduction by 8%)flooding with water ,dressing including removal of rubbish and surplus earth ,if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separatly) Holes 45 m dia and 45mdeep. (no of Plant.) |
| 121 | Providing, stacking and DisplayingAraucaria cookie having ht.1.80 m to 1.95 m, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 30 cm size of Earthen pot / Plastic pot and as per direction of the officer-in-charge. |
| 122 | Providing and displaying of Areca Palm having ht. 1.80 m to 2.10 m with 8 to 10 suckers, well developed, fresh and healthy with lush green foliage in 30 cm size of Earthen pot/Plastic pot & as per direction the officer-in-charge. |
| 123 | Providing and displaying of Croton Petra Bangalore (Specimen) variety having ht. 60 cm to 75 cm with 4 to 6 branches, well developed, fresh & healthy foliage approximately 60-65 leaves in 30 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 124 | Providing and displaying of Livistona palm having ht. 30 cm to 45 cm, well developed with 5 to 6 leaves, fresh & healthy foliage in 25 cm size of Earthen pot/Plastic pot as per direction of the officer-in-charge. |
| 125 | Providing and displaying of Livistona palm having ht. 60 cm to 75 cm, well developed with 8 to 10 leaves, fresh & healthy foliage in 30 cm size of Earthen pot/Plastic pot. as per direction of the officer-in-charge. |
| 126 | Providing and displaying of Raphis palm having ht. 75 cm to 90 cm with 12 to 15 equal suckers, well developed, full of fresh & healthy leaves from bottom to top in 25 cm size Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 127 | Providing and displying plant antirrhinum hybrid dwarf variety, specimen (8-10 plants) with fresh & healthy foliage in full bloom well developed in 35 cm Earthen Tray / Challi Pot and as per diection of the officer-in-charge. |
| 128 | Providing and displaying plants Cineraia long 45 to 60 cm ht. 8 to 10 branch with full bloom specimen plants with green painted stacking in 30 cm Earthen Pot /Plastic Pot and as per direction of the officer-in-charge. |
| 129 | Providing and displaying Dahlia double kenya variety in different colour well developed with 3 to 4 flowers in half bloom, good foliage stacked with Green painted Bamboo sticks, 45 to 60 cm height in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 130 | Providing and Displaying Dianthus dwarf specimen 6-8 in a pot with fresh & healthy foliage in full bloom well developed in 35 cm Earthen Tray/Nand as per direction of the officer-in-charge. |
| 131 | Providing and Displaying Marigold jaffri dwarf in different colour well developed with fresh & healthy foliage with 12 to 15 flowers in full bloom specimen plant 23 to 30 cm ht. in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 132 | Providing and displaying plants Pansy Hybrid sakata well developed with fresh & healthy foliage with 3 to 4 flower in bloom in 20 cm earthen pot/ plastic pot and as per direction of the officer-in-charge. |
| 133 | Providing and displaying Petunia hybird well develooped with fresh & healthy foliage in full bloom 6-8 plants in 35 cm Earthen Tray / Nands per direction of the officer-in-charge. |
| 134 | Providing and displaying Ranunculus hybrid varity in different colour specimen 5-6 plants in each pot with fresh & health foliag in full bloom well developed in 35 cm Earthen Tray / Nand as per of the officer-in-charge. |
| 135 | Bush Rose in different colour 2 to 3 healthy branch 30 cm and above ht. well developed with 8 or more flowers / flower buds in 20 cm Earthen pot / Plastic pot as per direction of the officer-in-charge. |
| 136 | Providing and Displaying Budded Rose (H.T. variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower plant in 20 cm Earthen Pot, as per direction of the officer-in-charge. |
| 137 | Providing and Displaying Creeper Rose variety 3 to 4 healthy branch 60 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge |
| 138 | Providing and displying Standerd Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flower in 25 cm Earthen Pot as per direction of the officer-in-charge. |
| 139 | Providing and displying Cycus revoluta specimen plant, having 45 to 50 fresh and healthy , leaves having 30 cm to 35 cm circumfrance of base stem well developed in 40 cm chall i. As per direction of the officer-in-charge. |
| 140 | Providing and displying ficus black vivon pillar topiary plant (sylinder type )well developed with fresh and healthy 180 to 210 cm ht in 40cm cement pot as per direction of the officer in charge. |
| 141 | Providing and displying FoxTail plam pant well developed with fresh and helthy foliage leaves of ht 210 to 240 to cm specimen plant in 40 cm cement pot as per direction of the office in charge. |
| 142 | Providing and Displaying Travelers palm well developed with fresh & healthy foliage 120 to 150 cm ht. in 35 cm Cement Pot as per direction of the officer-in-charge. |
| 143 | Providing and Displaying Washingtonia filifera palm well developed 90 to 105 cm ht. having 5 to 6 straight fresh and healthy leaves in 35 cm Cement Pot as per direction of the officer-in-charge. |
| 144 | Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushty shape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.. |
| 145 | Providing and stacking of Euphorbia milli hybrid variety, having ht. 30 cm to 45 cm with multi branch, full bloom, fresh and healthy leaves in 30 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. |
| 146 | Providing and stacking of Foxtail palm of ht. 120-150 cm bottom girth 15- 20 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 147 | Providing and stacking of Foxtail palm of ht. 180-210 cm bottom girth 25-30 cm well developed in big size HDPE bags as per direction of the officer-in-charge. |
| 148 | Providing and stacking of Foxtail palm of ht. 240-270 cm bottom girth 35- 40 cm well developed in big size HDPE bags as per direction of the officer-in-charge.4.0-Seasonal Plants. |
| 149 | Providing and stacking of Murraya exotica of height 45-60 cm. in poly bags of size 15 cm as per direction of the officer-in-charge. |
| 150 | Supply and stacking of Plant tecoma stans of height 90-105 cm bushy in big size HDPE bag as per direction of the officer in charge. |
| 151 | Supply and stacking of plant Thuja compacta of heigh 75-90 conical shaped well formed with healthy foliage in earthen pots of size 30 cm as per direction of the officer in charge 9.0 creeper Plants |
| 152 | Supply and stacking of Bignonia venusta (golden shower) plants of height 30 cm to 45 cm in 20 cm size of earthen pots / plastic pots & as per direction of the office- in -charge. |
| 153 | Carriage of materials Sand |
| 154 | Stone chips |
| 155 | Boulder |
| 156 | Red Brick |
| 157 | Fly Ash Brick |
| 158 | Aerocon Panel Kiosk Top Devlopment above Plinth Beam.Above PlinthSUPPLY AND FIXING OF 3000MMX600MMX 75MM THICK EVEREST WALL PANEL WITH ACCESORIESSide Wall 2 x 3.25 x 3.00 = 19.50 2 x 4.10 x 3.00 = 24.60Mid 1 x 4.10 x 1.00 = 4.10DeductionDoor -2 x 0.75 x 2.10 = -3.15Shutter -2 x 2.75 x 1.50 = -8.25 Total=36.80Extra for slab,slab Suppor & Other Work-10% = 3.68 TOTAL = 40.48 sqm or 435.73 sq. ft. |
| 159 | SUPPLY AND FIXING OF 30MM PUFF ROOF PANEL WITH ACCESORIES LIKE SCREW AND SILICAN LEBBOR |
| 160 | STEEL STRUCTURE 72X72 CULOMS AND 72X72 PARLINS AND 50X50 WITH BASE PLATE ANCHOR BOLT |
| 161 | SUPPLY AND FIXING OF ALLUMINEUM DOOR WITH ACCESARIES LIKE LOCK SET AND HANDLE |
| 162 | INSIDE PAINTING 2COAT OF WALL PUTTY AND 1 COAT OF PRIMER AND 2 COAT OF EMALSUN PAINT |
| 163 | SUPPLY AND FIXING OF M/S ROLLING SHETTER 10 X 8 FIT |
| 164 | 2 - seater portable toilet 890mm X 840mm X 1980mm (for 1- seater) with No sewage facility. |
| 165 | P/L Bamboo Thatch made of SPF timber sets up to roof,Kllin dried, factory pre-cat ready for assembling. Damantion will be 130x150mm. roofing board is of SPF cladding 12/18mm think rafter made up of SPF38x140 mm. Roofing shinless will be aspholt base, for flooring joist is of SPF38x140 mm & floor finish will be of THermopine as per Availabiltty Complete. |
| 166 | 1 HP Electric Water Pump Motor |
| 167 | Plastic Hose Pipe 1/2\\" dia |
| 168 | Gardening Water Sprinkler of Brass 3/4 size (Trajectory Angle 27 Degree) |
| 169 | Solar Street Light (LED based) consist of white LED luminaire ( LED + Driver) rating as per con guration along with Solar PV modules and LiFePo4 battery of given capacity, necessary control electronics, interconnecting wires / cables, module mounting structures, etc. to operate from dusk to dawn |
| 170 | Cylinderical Stainless Steel Dust Bin of steel grade 304, 1 Bin Mounted on 2 Pole capacity of 70 Litres. |
| 171 | P/L Gazibo (Pagoda) of Hexagonal Shape made of SPF timber sets up to roof,Kllin dried, factory pre-cat ready for assemeling. Damantion will be 130x150mm. roofing board is of SPF cladding 12/18mm think rafter made up of SPF38x140 mm. Roofing shinless will be aspholt base, for flooring joist is of SPF38x140 mm & floor finish will be of thermopine as per availabiltty complete. |
| 172 | Umbrella Bench 7 x 3ft x Ht 6 ft roof each |
| 173 | Full set Butterfly Sit Out (3Pcs) (Selfie Point) with iron MS sheet & electric oven powder coated paint |
| 174 | SOHRAY PAINT WITH ANIMAL ART |
| 175 | Feeder Pillar |
| 176 | DIVYA FIBRE PRODUCTS & OUTDOOR GYM EAUIPMENT--DIVYAFIBRE PRODUCTS & OUT DOORGYM EAUIPMENT Jungle RumblePlay Zone For children of agegroup of 3 to 12 years |
| 177 | LANDSCAPE STRUCTURES JungleRumble Play Zone For children ofage group of 3 to 12 years |
| 178 | Replay JungleRumble Play Zone For children ofage group of 3 to 12 years |
| 179 | Dolphin & Marine Statues (FRP)-6' Height blue dolphin statues in \\"Garden Statue\\" or \\"Fiber Statues\\" |
| 180 | Globe & Hands Monument :- 8' Height The \\"Hands holding the Globe\\" statue is classified under \\"Sculptures\\" or \\"Outdoor Decor\\". |
| 181 | Butterfly & Life Cycle RingThe butterfly sculpture of 7' height of \\"Educational Park Equipment\\" or \\"Nature Theme Sculptures.\\" |
| 182 | Children Gardening Statues:- The boy and girl figures of 4' height. \\"Garden Figurines\\" or \\"Landscape Decorative Items.\\" |
| 183 | CARVING WORK - SHOPDesign as per drawing |
| 184 | CARVING WORK - PassageDesign as per drawing |
| 185 | Provision of GST @ 18% |
| 186 | Add 1% Labour Cess Please Enable Macros to View BoQ information ` |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
