|
| 1 | Dismantling wall tile(terracota tiles) including cement mortar bedding (at any height) and removing the rubbish off the premises complete all as specified and directed. |
| 2 | Material and labour for rendering surfaces 15mm thick in CM (1:4) mixed with WPC finished even and smooth including necessary scaffolding and other safety measures at any height complete all as specified and directed. Note: WPC shall be measured and paid separately |
| 3 | Supply only for liquid waterproofing compound complete all as specified and directed. |
| 4 | Material and labour for forming V grooves in plaster exc 10mm deep and n exc 10mm on faces to match with existing pattern (size and shape) complete all as specified and directed. |
| 5 | Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. The paint will be applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 6 | Material and labour for chipping of unsound/weak concrete material upto 75mm average thickness from slabs, beams, columns etc. with manual Chisel and/or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as specified and directed. |
| 7 | Material and labour for cleaning of reinforcement bars upto 12mm dia bars from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, complete all as specified and directed. |
| 8 | Material and labour for providing, mixing and applying SBR polymer (of approved make) modified cement mortar (inclusive of cement mortar) 15MM in proportion of 1: 4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications complete all as specified and directed.. |
| 9 | Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)complete all as specified and directed. |
| 10 | Refixing PVC (SWR) pipes any dia double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 11 | Supply and fixing for stack clamps out of 50 mm by 5 mm flat iron any dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 12 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 13 | Dismantling wrought iron or mild steel work of any description not otherwise provided for in truss and similar framed work complete all as specified and directed. |
| 14 | Supply and fixing pre- painted galvalume aluminum zinc coating Gl based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 15 | Material and labour for roof trusses framed trussed pulins crance rails and fastening and heavey brackets framing (Beam tee, angle, square, rectangular hellow sections or flat sections indl distance pieces, cleats etc Fe-410W (Gde E 250) complete all as specified and directed. |
| 16 | Preparation of new painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint, over a coat of primer complete all as specified and directed. Please Enable Macros to View BoQ information |
