Name of Work:- Supply, Installation, Testing and Commissioning of fire fighting and fire alarm system in Nursing Hostel at AIIMS Rishikesh | Sl. No. | Item Description | |
| 1 | Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/Class -II of IS: 3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.150 mm. Dia | | 2 | Providing and fixing M.S. pipe to I.S. 1239 (Heavy C class) complete with all supports & fittings like, unions, couplings, bends, elbows, tees, offsets,reducers, flanges as per table 'E' etc. to complete the work as per the requirement at site including painting with one coat of primer after surface preparartion and two coats of synthetic enamel paint, cutting and making good the walls good complete. complete with welded joint ( all type ) ( internal works/External Works) 25 mm dia. | | 3 | Providing and fixing M.S. pipe to I.S. 1239 (Heavy C class) complete with all supports & fittings like, unions, couplings, bends, elbows, tees, offsets,reducers, flanges as per table 'E' etc. to complete the work as per the requirement at site including painting with one coat of primer after surface preparartion and two coats of synthetic enamel paint, cutting and making good the walls good complete. complete with welded joint ( all type ) ( internal works/External Works) 80 mm dia. | | 4 | Providing and fixing M.S. pipe to I.S. 1239 (Heavy C class) complete with all supports & fittings like, unions, couplings, bends, elbows, tees, offsets,reducers, flanges as per table 'E' etc. to complete the work as per the requirement at site including painting with one coat of primer after surface preparartion and two coats of synthetic enamel paint, cutting and making good the walls good complete. complete with welded joint ( all type ) ( internal works/External Works) 100 mm dia. | | 5 | Providing and fixing M.S. pipe to I.S. 1239 (Heavy C class) complete with all supports & fittings like, unions, couplings, bends, elbows, tees, offsets,reducers, flanges as per table 'E' etc. to complete the work as per the requirement at site including painting with one coat of primer after surface preparartion and two coats of synthetic enamel paint, cutting and making good the walls good complete. complete with welded joint ( all type ) ( internal works/External Works) 150 mm dia. | | 6 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required : 100mm dia | | 7 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required :150mm dia | | 8 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetalseat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :100 mm dia | | 9 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetalseat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :80 mm dia | | 10 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets andconforming to IS 780 of following sizes as required : 100mm dia | | 11 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets andconforming to IS 780 of following sizes as required : 150mm dia | | 12 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : to 20 Kg/ cm2 of approved quality as specified. 25 mm dia. | | 13 | Providing and fixing dial type pressure gauge with isolation cock and copper pipe at hydrant station.Dial diameter 100 mm calibration 0-15 kg/ sq.cm. | | 14 | Providing and fixing single acting air release valve with screwed inlet 50 mm dia.. | | 15 | Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blankGunmetal/Stainless Steel cap and chain as requiredSingle headed Stainless steel | | 16 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red,conforming to IS 884 complete with the following as required.(a) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585(b) 20 mm nominal internal dia gun metal globe valve & nozzle.(c) Drum and brackets for fixing the equipmets on wall.(d) Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30 M | | 17 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Stainless Steel (Grade 304) | | 18 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diametersize nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipecoupling as required: Stainless Steel (Grade 304) | | 19 | Providing and fixing fire brigade inlet head as per IS:904 Specification tested for 20 Kg/cm2 with 63 mm dia. instantaneous type inlet and 100/150mm dia.. flanged outlet with built-in check valve for fire brigade connection to under ground tanks and fire risers including companion flanges as portable \\" E\\" including nuts, bolts & washers etc. 4 way - 150 mm dia M.S. Pipe | | 20 | Air Cushion Tank for Risers, Providing and fixing of air vessel of the following specifications fabricated with MS Pipe of thickness specified on terrace specifications:- a. Diameter : 250 mm b. Shell Thickness: 6.35 mm c. Dish Ends : 10 mm d. Height : 1200 mm e. Finishing: Two coats of red enamal paint over primer out side and two f. Material of construction: M.S g. Test Pressure: 20 Kg/Sq.Cm. i. Height of supporting legs: 400 mm j. Quantity | | 21 | Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice ofrequired size to be fitted between flange & landing valve of external and internal hydrants to reducepressure at the outlet to the level of 3.5 kg/cm2 complete as required. | | 22 | ( All pumps will be supplied with wearing ring ,mechanical seal and coupling guard and Base Frame. Rates Quoted for pumps shall include making of foundation, supply and fixing of base frame, foot valve on suction side, butterfly valve and NRV on delivery side complete in all respects) (a)Supplying, installation, testing and commissioning of electric driven terrace pump conforming to IS 12469: 2019 suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)(b) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impellerwith stainless steel shaft, mechanical seal as required.(c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50Hz, AC supply with IP55 class of protection forenclosure, horiziontal foot mounted type with Class- 'F' insulation, conforming to IS-12615: 2018.(d) M.S.fabricated common base plate, coupling,coupling guard, foundation bolts etc.as required.(e) Suitable cement concrete foundation duly plastered and with anti vibration pads.F) Including MS canopy for weather protection 900 lpm at 35 m Head | | 23 | Providing and fixing \\"Y\\" Type suction strainer with flanged connection with two coats of enamel paint of approved shade after surface preparation necessary stainless steel nuts, bolts, washers etc.. | | 24 | Supply, installation testing and commissioning of double flanged Rubber Expansion Bellows/joint (suitable for system test pressure) of standard length as per manufacturers specs including rubber PTFE gaskets, flanges, nuts, bolts and washers complete as required. 100 mm dia | | 25 | Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of motor control with,- 1 No. auto start panel activated with pressure switch complete with all accessories including MCCB,MCB,Contractors Relays ETC complete as required ready for working. Colour coded internal wiring from main to bus bar, switchgear, starters, indicating lamps complete in all respects. | | 26 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. | | 27 | Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. 10 Zone | | 28 | Supply ,installation ,testing & commissioning of manual call box housing, manual call point complete in all respect \\"Ases Agni\\" | | 29 | Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. | | 30 | Supply ,installation ,testing & commissioning of 3.5 * 35 sq mm armoured aluminium cables as required. Make Havelles/PolyCab / equivalent | | 31 | Supply ,installation ,testing & commissioning of 3 C * 16 sq mm armoured aluminium cables as required. Make Havelles/PolyCab / equivalent | | 32 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire | | 33 | Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2 x 1.5 sq. mm | | 34 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 20 mm | | 35 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. | | 36 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) | | 37 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required 100 mm width X 50 mm depth X 1.6 mm thickness | | 38 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Please Enable Macros to View BoQ information |
|