|
| 1 | Based on Electric BSR 2022 |
| 2 | S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR |
| 3 | 25 mm |
| 4 | 32 mm |
| 5 | Providing & Fixing of ISO certified company made virgin material PVC trunking system as per PWD specification for electrical Works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . The trunking system shall have adaptable system for modular type RJ 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. OEM shall have submit NABL accrediated /CPET lab test reports before execution & All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . |
| 6 | 32mm X 20mm |
| 7 | 100/105mm x 50mm |
| 8 | Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with PVC, UTP (Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable as per latest ammendments of ANSI/TIA/EIA-568 , The copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by PVC Jacket. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies up to 250 Mhz. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch Panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . |
| 9 | Supply and Installation of unsheilded/360 degree sheilded Information outlets made of high impact plastic body with ABS, FR Grade halogen free material with provision for protection against dust in jack, suitable for Cat 6/6A application complying to latest ammendments, According. to Cat. 6/6A channel, It should support channel as well as components requirements of Cat.6/6A standards at frequencies of up to 250 to 500 Mhz. Cat 6/6A unshielded/shielded Jack should be suitable to terminate 4 pair, 23/24 AWG solid/stranded wire diameters, using 100 Ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated Insulation displacement contact, with easy lock mechanism, It supports IEC 60603-7-4 and complied with ANSI/TIA/EIA 568 C.2 standard. jack should be RJ11,RJ12 & RJ45 compatible. Should support Ethernet 1.2 Gb/s ATM,Digital video and broadband/baseband analog video, Voice over internet protocal (VOIP) Specifications in existing modular/MS Boxes along with necessory connections as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . |
| 10 | Cat 6, Un-sheilded Information Outlet |
| 11 | Supply & fixing of square Faceplate for Flush / Surface Mount Information Outlets Single/Dual or Quad Aperture , material should be PC+ABS body, Suitable for RJ45 unshielded/shielded connection modules. Should match with I. O. OEM. Dimensions should be 86mm X 86mm as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . |
| 12 | Single Aperture |
| 13 | Providing & Fixing of Wiring Accessories OEM fabricated following size GI box of 1.2 mm thick with earthing terminal and adjustable floating clamp in recess/ surface suitable for modular accessories as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . |
| 14 | 1-2 Module |
| 15 | Supply , Installation and Testing of 4 pair, 100 Ohm impedance, Cat 6/6A /Class E/Ea patch cords should be constructed of minimum 23/24 AWG, stranded bare Copper cable with FRPVC/LSZH Jacket, with an enhanced performance by factory moulded RJ45 connectors with strain relief boots as per ANSI/TIA/EIA 568-C.2 suitable for Cat 6/6A application complying to latest ammendments Category 6/6A Standards, According. to TIA568C.2, ISO/IEC 11801, EN 50173, IEC 60603-7-51, EN 60603-7, IEEE 802.3an minimum requirement for 1G BASE-T to 10G BASE-T performance. Patch cords shall be straight thru cable compatible with both T568-A and T568-B wiring schemes, should support IEEE 802.3af / IEEE 802.3at for POE applications, Minimum 750 to 1000 mating cycles in plug contacts for long durability, Should support Ethernet 10GBASE-T, 1.2 Gb/s ATM, Token ring 4/16, Digital video and broadband/baseband analog video, Voice over internet protocal (VOIP).All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . |
| 16 | Cat 6, U/UTP (Unscreened/Un-sheilded Twisted Pair) Patch Cord |
| 17 | 1 Mtr |
| 18 | Supply & Installation of IP-20 & IK-08 , UL Listed Wall mounted Double Section Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet, front sturdy sheet steel frame folded from one piece and welded with minimum 5mm toughened glass door,Vertical Mounting Rail 1.6 MM with 'U'Marking , with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, 2 pair of 19\\" angles with wall mounting provision on wall. Accessories like: 1 No of 19\\" 1U Horizontal Cable manager, 1 No of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware , 1 No of 19\\" 1U, mountable socket strips with 5 nos of 5A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable. fixing on wall with Suitable Anchor fastner etc as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . |
| 19 | 12 U Rack with Width 600 mm & Depth 400 mm + 100 mm |
| 20 | Part - B Non BSR Items |
| 21 | Seminar Hall 2 Nos |
| 22 | Supply & installation of Motarised screen SIZE 10*12 High Quality American MW Fabric, Fabric, Hassle Free Installation, Dual Remote IR & RF with Control panel, Heavy Duty Synchronous Motor,including Mount, making connection etc complete in all respect . Make:- Suvira/Draper/Liberty |
| 23 | Supply, Installation, Testing and Commissioning of Projector with 5300 ISO lumens or more capacity, 3 LCD Display technology, with native resolution 1920*1200 WUXGA or more with solid state laser illumination, estimated life 20,000 hrs or more (normal mode), motoeized zoom & focus, HDMI*2 & HDbase T*1 , Computer & RCA connector *1 Video input and 3.5 mm stereo input and HDMIout*1, monitor &audio output control via RS-232C, RJ45port*1, wired remote controlin/out, 3.5 mm mono connector*1, HD BaseT*1, supplied with IR remote control complete with ceiling mount structure. Approved Makes:- Christie/Barco/Digital Projection |
| 24 | Supply & testing and commissioning of Ceiling Mount Kit 2FT Ceiling-mount capability • Extremely flexible design allow to fit almost all popular projectors • Quick release universal mount for Projector • 360 degrees Rotate for Projector • +/- 20 degrees Tilt and Roll for Projector • Adjustable-height from 11.42” to 32” (290mm-810mm) • Cable-routing channel for a clean look • Cable management including fixing with fastner etc as required complete in all respect |
| 25 | SITC of Digital Podium; Integrated Central Teaching Platform, (a) Main Cabinet System - Metallic structure customized to house hardware/software with powder coated fitted with cooling fans & caster wheels with brakes & provision to mount Smart Orator with beam splitting mirror, Podium with Std Dimension, External connectivity options: 2 x USB, 2 x XLR on Top and at right bottom – HDMI in/ Out, VGA In/ Out, Audio In/ Out, Gigabit LAN, Power socket with On/Off switch, Drawer for document camera with dimensions – Depth 560mm, width 440mm, height 150mm, Metallic top tray for placing documents, laptop etc. dimensions 630mm x 655mm, Drawer for keyboard and mouse, Security- All drawers, Sliding Trays, and Doors should be lockable, Minimum 8 x 5 Amp modular universal metallic spike buster for devices connectivity with miniature circuit breaker and central power control, Provision to fix Logo at the front side with the flexibility to change the logo, Size – 560mm x 410mm, Provision of 19\\" Rack inside podium to fit in international standard equipment with minimum adjustable shelves, Provision for upgrades to cater for future changes in technology, Access doors for servicing both from front and back sides of the podium, Wire managers on left, right sides and at bottom for flexibility of managing additional wires/wiring. (b) Integrated multimedia controller on top panel with keypad to control Projector Screen, audio system volume control, switch on/off the PC & Projector, IR device control, RS232, LAN connector, USB etc. Switching among PC, Laptop and Document Camera with auto splitting between podium monitor & projection system, switching DVD & TV etc. Minimum three full HD (HDMI) input devices and minimum support for two full HD (HDMI) output for simultaneous display. (c) Interactive Display - Display size 21.5” Interactive Monitor with up to 60-degree adjustable motorized tilt, Resolution 1920 x 1080 pixel. 250 Cdm2, 10 Touch Point, HDMI/ DVI, VGA & USB Ports. (d) Integrated Mixer Amplifier - 120W, Rated Output 120 Watt, Frequency Response - 60Hz to 20 kHz (+1/-3 dB at -10dB refracted output) Output - 8 ohm - 100V, Sensitivity - 1mv, SNR- 63db, Phantom Power - Inbuilt selectable phantom power for all microphones input, Input Source - 4 Mic/ Line input & 1 BGM. (e) Wireless Head-worn and Handheld Microphones (Dual Channel 02 Units - Should be able the clearest channel |
| 26 | available with the touch of one button, Infrared channel transfer from the receiver to the transmitter for easy and error-free setup, 14-hour battery life from two AA alkaline batteries, Metal transmitters with backlit LCD display and battery gauge, Receiver Type: Synthesized PLL, Number of channels: 32, Frequency response: 80 Hz – 18 kHz ± 2 dB, Distortion: <1%, Signal-to-Noise Ratio: > 100 dB A-Weighted, Dynamic Range: > 95 dB. (f) Gooseneck Microphone - Should have RFI shielding, Polar pattern: Cardioid, Frequency response: 70-15kHz, Element type: Condenser, Sensitivity: 4.5mV/pascal, Dynamic range: 102 dB, Power requirement: 9-52 V (DC), Output Impedance: 200 Ohms, Overall length: 18-inch. (g) Audio System - 4 x 30-Watt Wall Mount Speakers, 1Rated power: 30W, Selectable 8-ohm, 70 V and 100 V inputs, Power tapping: 30/15/7.5/3.75 W, Sound pressure level: 105/90 dB, Effective frequency range: 100Hz - 19KHz, Rated input voltage: 15.5/70/100 V, Rated Impedance: 8/163/333 ohm, Transducers: 5\\" woofer & 0.51\\" dome tweeter, Water and dust protected IP65. (h) Computer Unit – Intel Xeon Processor, 8GB RAM, 1TB Hard Disk, Keyboard & Mouse, Windows 10 Professional, MS Office 2016, (I) Power Unit - 1KVA Line Interactive UPS with minimum 10-15-minute power back-up, Audio approved makes :- Bosch / Apart / Bose, PC approved makes : lenovo /dell /hp, Digital Podium Approved Makes: AHA / Globus / Altop / Ekin / Techpoduim |
| 27 | Supply, Installation,Testing & Commissioning of 4K Signal / HDR Compatible, 4,500 ANSI Lumens DLP Projector. I/O Connectors: HDMI 2.0×1 (HDCP 2.2 supported), HDMI 1.4ax1 (HDCP 2.2 supported), USB-A 2.0×1, VGA-INx1, VGA-OUTx1, Audio-INx1, Audio-OUTx1, RS232x1, Video Compatibility:PAL (B, D, G, H, I, M, N, 4.43MHz), NTSC (M, J, 3.58MHz, 4.443MHz), SECAM (B, D, G, K, K1, L, 4.25,MHz, 4.4MHz, 480i/p, 576i/p, 720p(50/60Hz), 1080i(50/60Hz) 1080p(24/50/60Hz). Shall be supplied with projector mount bracket as required. Approved Makes: Christie/Barco/Optoma |
| 28 | Supply, Installation, Testing & Commissioning of Motorized Screen: Wall mountable Motorized Screen with minimum 119” Diagonal Size or higher, Aspect Ratio: 16:9, Fabric: HD-MW, Motor: Tubular Motor, Remote: RF Remote of Approved Makes: Suvira /Talon/ draper / liberty / Grandview |
| 29 | Supply, Installation, Testing & Comissioning of Accessories; Power Cable, HDMI Cable, Casing/ Conduits,Wiring for audio all other necessary accessories required to set-up the hardware as per site requirement |
| 30 | SITC of following diagonal size professional Display, 4k Resolution, Brightness(Typ.) 440 nit and above , Contrast Ratio-2000:1 and above, Viewing Angle(H/V)-178/178, Response Time(G-to-G) 8ms, Input: RGB- Analog D-SUB, Video- HDMI 2.0 (2), HDCP- HDCP 2.2, Audio- Stereo mini Jack, USB- Only F/W upgrade, Outputs: RGB- DP1.2(Loop- out), Audio- Stereo mini Jack, External Control- RS232C(in/out), RJ45, External Sensor Detachable type(IR Ambient). Operation Hour 24/7. mounting bracket etc. as required. |
| 31 | Supply, Installation, Testing & Commissioning of 2 input 4 output hdmi splitter complete as required. |
| 32 | SITC of 1Phase Input, 1Phase Output Microprocessor control based Inverter with input voltage range of 180-260V and output voltage same as input 210V +/- 10%, output frequency of 50 +/- 0.1 Hz and 0.8 Output factor. Overall efficiency of upto 80%, Transfer time 15 msec & Sinewave output.Inverter should have LED/LCD Panel Display showing Mains ON, INV. ON, Charging/Charged.Inverter should have protection from Overload/Short Circuit Trip/Over Temperature and Low Battery Trip.Batteries should be Tubular Type for 60 min back up with Trolley/Rack and necessary cable for Inverter to Batteries Installation. |
| 33 | 5KVA (1/1) Inverter with 8000 VAH |
| 34 | Supply, Installation, Testing & Commissioning of Single 5\\" Cabinet Speaker with frequency response of (-3db) 85Hz-20Khz and frequency response (-10db) 60Hz-20Khz or better with sensitivity of 90db , Max SPL 109db (110db peak), covering angle of Horizontal 90 degree and Vertical 90 degree, Power handling of 75W (300 W Peak) Continuous with nominal impdence of 8 ohm and minimum impedence of 6 ohm(Approved Makes: Bose, Nexo, Electro-Voice) |
| 35 | Supply, Installation, Testing & Commissioning of 480 Watt Mixer Amplifier Unit- for providing a crisp call or clear music with 4 microphone / line inputs, plus music source input, announcement only output, 3 wire volume override, with Mains power supply 230 VAC ±10%, 50 Hz (reduced power at lower mains), Inrush current 20 A , Power consumption 120W, Frequency response (Line) 80 Hz to 18 kHz (+1/‑3 dB @‑10 dB ref. rated output) Frequency response (Mic.) 80 Hz to 18 kHz (+1/‑3 dB @‑10 dB ref. rated output) Distortion <1%@ rated output power, 1 kHz Bass Control Max. ± 8 dB Treble Control Max. ± 8 dB, including making connection etc complete in all respect (Approved Makes:- Bosch-EV/ Bose /D&B) |
| 36 | Supply Installation Testing of 1×8 HDMI® distribution amplifier, 4K/UHD capability @ 60 Hz with 4:4:4 chroma sampling, plus support for HDR formats, HDCP 2.2 compliant, EDID management Supports cascading up to eight units, Audio de-embeddingin (Approved make:Kramer/MilestonePro/Crestron) |
| 37 | Digital class room 8 Nos |
| 38 | Supply, Installation, Testing & Commissioning of 75\\" Interactive Display with 4K UHD resolution 340X210 Pixel along with Backlit D-LED technology with viewing angle of 178X178 degree with eye protection technology with brightness of 400 Cd/m², contrast ratio of 5000:1 with aspect ratio of 16:9 having refresh rate of 60 Hz with display colour of 1.07 Billion having response time of 8ms with anti glare coating with IR touch with touch resolution of 32,768x32,768 with 4mm toughend glass surface protection having andriod version of v11.0 with quad core CPU having internal storage of 32GB and 4GB RAM having inputs of 1 x Mini AV(3.5 mm mini jack, 2 x HDMI 2.0(60 Hz/4K) 1 x HDMI 2.0(60 Hz/4K), and output of 1 x COAX(Multi Channel Audio), 1 x Mini AV(3.5 mm mini jack), 1 x Earphone Out(Stereo Audio), 1 x USB-B(Touch), 1 x USB-A 2.0, 1 x USB-A 3.0, 3 x USB-A 3.0, 1 x USB-B 3.0, 1 x USB-C having ethernet 1 x RJ45 Input, 1 x RJ45 Output control interface 1 x RS232C Control Signal Interface 3 + 1 ( Wifi 802.11a/b/g/n/ac 2.4 GHz/ 5GHz 2T/2R, Bluetooth 5.0) having collobration of Screen Mirroring, Digital Whiteboard, Office, Teaching Tools, Screen Recording, Windows OPS with 15Wx2 speaker in respect to approved make - Delta/Christie/Barco |
| 39 | Supply, Installation, Testing & Commissioning of Wall / Ceiling Speaker Unit- power 12 W (12 / 6 / 3 / 1.5 W) Sound Pressure Level at rated power / 1 W(1 kHz, 1 m) 100 dB / 89 dB 103 dB / 89 dB Opening angle at 1 kHz / 4 kHz (-6 dB) 180° / 64° 180° / 58° Effective frequency range (-10 dB) 55 Hz to 20 kHz 55 Hz to 20 kHz Rated voltage 70 V / 100 V 70 V / 100 V Rated impedance 418 / 833 Ohm 208 / 417 Ohm Connector 3‑pole screwterminal block.including making connection, (Approved makes : Bosch -EV / Bose / D&B) |
| 40 | Supply, Installation, Testing & Commissioning of Handheld Wireless Mic with Cardiod polar pattern for transmitter,Dynamic microphone with Neodymium magnet , Receiver frequency response 80Hz-18kHz,Receiver RF sensitivity < 1.0 µV,Receiver Image rejection>55dB,Receiver Dyanmic range >95dB and receiver having 32 channels possible,Receiver S/N ratio >100dB A,distortion <1 %, Transmitter sensitivity - 3.2 mV/Pa,modulation:+/-40kHz (Approved Makes:- Bosch-EV/ Bose /D&B) |
| 41 | Supply, Installation, Testing & Commissioning of Wireless Lapel Mic with Cardiod polar pattern for transmitter,Dynamic microphone with Neodymium magnet , Receiver frequency response 80Hz-18kHz,Receiver RF sensitivity < 1.0 µV,Receiver Image rejection>55dB,Receiver Dyanmic range >95dB and receiver having 32 channels possible,Receiver S/N ratio >100dB A,distortion <1 %, Transmitter sensitivity - 3.2 mV/Pa,modulation:+/-40kHz (Approved Makes:- Bosch-EV/ Bose /D&B) |
| 42 | Supply & Installation of 120 Watt Mixer Amplifier Unit- for providing a crisp call or clear music with 4 microphone / line inputs, plus music source input, announcement only output, 3 wire volume override, with Mains power supply 230 VAC ±10%, 50 Hz (reduced power at lower mains), Inrush current 20 A , Power consumption 120W, Frequency response (Line) 80 Hz to 18 kHz (+1/‑3 dB @‑10 dB ref. rated output) Frequency response (Mic.) 80 Hz to 18 kHz (+1/‑3 dB @‑10 dB ref. rated output) Distortion <1%@ rated output power, 1 kHz Bass Control Max. ± 8 dB Treble Control Max. ± 8 dB, including making connection etc complete in all respect (Approved Makes:- Bosch-EV/ Bose /D&B) |
| 43 | Supply, Installation, Testing & Comissioning of Accessories; Power Cable, HDMI Cable, Casing/ Conduits,Wiring for audio all other necessary accessories required to set-up the hardware as per site requirement |
| 44 | Supply & Laying of of 2 Core X 1.5 Sqmm Speaker Cable for connecting speakers to controller Approved Makes: Finolex, RR Cables, Deepcab |
| 45 | Supply & Laying of 2 Core Shielded Cable for connectings Microphones with related conduits / fittings / termination, etc. Approved Makes:-Belden/. Kramer / Crystal / Deepcab / sircco |
| 46 | Supply & Fixing of XLR Connectors (for connecting speakers & mikes with amplifier) Please Enable Macros to View BoQ information |
