|
| 1 | Supply and erection of follwing material |
| 2 | Cross arm holding clamp pcc pole |
| 3 | Cross bracing m.s. angle |
| 4 | Cross arm holding clamp pcc 11 mtr |
| 5 | Guarding angle 50×50×6×2500 |
| 6 | Guarding angle holding clamp 50×6mm |
| 7 | Lt clamp with bolt & nuts |
| 8 | Holding clamp for round pole |
| 9 | Holding clamp for pcc 8.5 |
| 10 | 11 kv f-clamp/f bracket |
| 11 | Lt shackle insulator |
| 12 | Bolt & nut for shakcle insulator |
| 13 | Eye hook |
| 14 | Stone pad 300×300×75mm |
| 15 | Three phase distribution box clamp |
| 16 | Safe loading Carriage & unloading of following material from store centre to pit site/JE dump store approx 35 Km. |
| 17 | Gi wire 3.15 mm 10 swg |
| 18 | Extra for stays at angle location |
| 19 | Top channel ms 100×50×2240 mm |
| 20 | Dropper channel ms 100×50×2000 mm |
| 21 | Tee off channel |
| 22 | M.s. angle 65×65×6 mm |
| 23 | Pcc pole 8.5 mtr. Long |
| 24 | Pcc pole 11 mtr. Long |
| 25 | Ab cable (1×16+1×25) sq.mm. |
| 26 | Ab cable (3×50+1×35+1×16) sq.mm. |
| 27 | Ab cable (3×120+1×95+1×16) sq.mm. |
| 28 | Earthing rod |
| 29 | Distribution box single phase |
| 30 | 11 kv polymeric disc insulator 45kn |
| 31 | 11 kv polymeric pin insulator |
| 32 | 11 kv disc fitings |
| 33 | Distribution box three phase |
| 34 | Acsr rabbit conductor |
| 35 | X-arm m.s. angle 65×65×6mm v type |
| 36 | Erection & Stringing and Sagging of 11 KV & LT line |
| 37 | Gi wire 3.15 mm 10 swg |
| 38 | Extra for stays at angle location |
| 39 | Top channel ms 100×50×2240 mm |
| 40 | Dropper channel ms 100×50×2000 mm |
| 41 | Tee off channel |
| 42 | M.s. angle 65×65×6 mm |
| 43 | Pcc pole 8.5 mtr. Long |
| 44 | Pcc pole 11 mtr. Long |
| 45 | Ab cable (1×16+1×25) sq.mm. |
| 46 | Ab cable (3×50+1×35+1×16) sq.mm. |
| 47 | Ab cable (3×120+1×95+1×16) sq.mm. |
| 48 | Earthing rod |
| 49 | Distribution box single phase |
| 50 | 11 kv polymeric disc insulator 45kn |
| 51 | 11 kv polymeric pin insulator |
| 52 | 11 kv disc fitings |
| 53 | Distribution box three phase |
| 54 | Acsr rabbit conductor |
| 55 | X-arm m.s. angle 65×65×6mm v type |
| 56 | Dismantling of 11 kv damage pole |
| 57 | Dismentaling of existing dp/dt etc |
| 58 | Dismentaling of existing damaged lt network |
| 59 | CARRIAGE OF SCRAP(from site to je store and je store to central store) |
| 60 | Plinth for tf |
| 61 | Earthing for tf |
| 62 | Fencing of tf |
| 63 | Concreting of pcc/st pole |
| 64 | Concreting of stay |
| 65 | Tree branches |
| 66 | Rcdc work Please Enable Macros to View BoQ information |