|
| 1 | Earth work in excavation in foundation trenches in foundation in ordinary soil (vide classification of soil -A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts levelling ramming the foundation trenches, removing, roots of trees shurbs all complete as per approved design building specification and direction of E/l. |
| 2 | Earth work in excavation in foundation trenches in foundation in ordinary soil (vide classification of soil -A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts levelling ramming the foundation trenches, removing, roots of trees shurbs all complete as per approved design building specification and direction of E/l. + Extra for earth work in hard soil as per approved design building specification and direction of E/l.(Vide classification of soil item -B) |
| 3 | Filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50M and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurement compacted volume) |
| 4 | Earth filling in foundation trenches and plinth in layer not exceeding 150mm thick will watered rammed fully compacted and fine dressed with earth obtained after cutting within a lead of 50mm and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurement compacted volume). |
| 5 | Providing coarse clean sand in filling in foundation trenches or plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts includng cost of all materials, Labour, rotalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume). |
| 6 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering texes royalty all complete as per building specification and direction of E/I. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 20 mm nominal size) |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement : 2 coarse sand (zone-III): 4 graded stone aggregate 20 mm nominal size) |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement : 2 coarse sand (zone-III): 4 graded stone aggregate 20 mm nominal size) |
| 10 | Providing precast R.C.C M-150 with nominal mix of (1:2:4) of roof slab of desired size with approved quality of stone chips and clean course sand of F.M. 2.5 to 3 including curing shuttering carrying the slab manually to the site and laying in position all complete (but excluding the cost of reinforcement) taxes and royallty, all complete as per building specification and direction of E/I. |
| 11 | Providing and laying in position specified grade of reinforced cement concrete, exluding the cost of centering, shuttering, finishing and reinforcement- all work up to plinth level. 1:1.5:3 (1 cement: 1.5 coarse sand (zone-iii): 3 graded stone aggregate 20 mm nominal size).(Foundation) |
| 12 | Reinforced cement concrete work in walls (any thickness), including attached plasters, buttresses, plinth and string courses, fillets, column pillars, piers, abutments, posts and struts etc. above plinth level upto floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement :1.5 coarse sand (zone -iii):3 graded stone aggregate 20 mm nominal size)(Plinth Beam & Column) |
| 13 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 14 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 15 | Reinforceemnt cement concrete work in beams, suspended floors, roofs having slope up to 15º landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircase above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 |
| 16 | Reinforceemnt cement concrete work in beams, suspended floors, roofs having slope up to 15º landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircase above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 |
| 17 | Reinforceemnt cement concrete work in beams, suspended floors, roofs having slope up to 15º landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircase above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 19 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts |
| 20 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 21 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and platform. |
| 22 | Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, Chajjas, corbels etc., including edges. |
| 23 | Providing designation 75B brick work in C.M (1:6) in foundation and plinth with approved quality ------ do ---- do ---- as per direction of E/l. |
| 24 | Providing 50 mm thick damp proof course with cement concrete (1:2:4) with approved quality do-do- of E/l. |
| 25 | Providing 75 B brick work in C.M (1:6) in super structure and plinth with approved quality of clean coarse sand ---- do---do--- as per direction of E/l. |
| 26 | Providing designation 125 mm thick reinforced designation 75A brick work in CM (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 25 including the cost of screening, carriage of materials, scaffolding , raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I. |
| 27 | Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 28 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 29 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty where required, scaffolding, washing of floors and taxes all complete as per specification and direction of E/I. |
| 30 | Providing and laying double charge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer ) with water absorption less than 0.08% and confirming to IS 4457:2007 of approved make in all colours and shades laid on 20mm thick cement mortar 1:4 (1 cement : 4 course sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigment etc,complete.Size of tile 300x300x10mm |
| 31 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 32 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.Granite stone slab of colour black, Cherry/Ruby red |
| 33 | Providing and fixing fan hook of 16mm dia TMT M.S. bar 1 metre long bent to required size and shape, placed in position and fixed in R.C.C slab/beam at the time of of casting all complete as per building specification and direction of E/I |
| 34 | S/F M.S. grill made of 20 x 6mm M.S. flat as per approved design and drawing, properly fabricated with joints continous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction ofE/I. (Where materials is not supplied by the deptt.) |
| 35 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 36 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separa Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 37 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
| 38 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) |
| 39 | Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 40 | Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 41 | Providing 25mm thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 42 | Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately). |
| 43 | Providing 4mm flat pressed ACP Board with wall with 120x60mm. Sal wood beams at 122cm. Centres and 60x 40mm. Sal wood runners at 122cm centres including cost of 2 coats of wood preservative paint of approved make, fixing at site and taxes all complete as per approved drawing, building specification and direction of E/I. |
| 44 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 45 | Providing D- Handel made of 16mm wide and 6mm thick aluminium flat -do- all complete job as per specification and direction of E/I. |
| 46 | Wall printing (Anganwadi printing including materials, labour and all complete job) |
| 47 | Providing Tor steel reinforcement of 8mm, 10 mm and 12 mmmm dia bar as per approved design and drawing TMT Fe 500 (Only vaild for Tata (tiscon), Sail,JSPL, Electrosteel Steel Ltd. Bokaro and Viraz (RINL)all complete as per building specification and direction of E/I (5.5.4)8mm Dia bar |
| 48 | (a) 10mm Dia bar |
| 49 | (b) 12mm Dia bar |
| 50 | Carriage of MaterialBricks |
| 51 | Chips |
| 52 | Stone Metal |
| 53 | Cement |
| 54 | ElectrrificationPoint wiring in PVC conduit, with modular type switch:- Wiring for light /fan point / exhause fan point / call bell point with 1.5 sq.mm FRPVC inlsulated copper conductor single core cable in surface / recessede conduit with paino type switch phenolic laminated sheet suitable size M.S box insulated copper conductor. Group - AGroup - C |
| 55 | Wiring for light /power pluge with 2x4sq.mm FRPVC insulated copper conductor single core cable in surface / recessede PVC conduit along 1 No Sqmm FRPVC insulated copper conductor single core cable for loop earthing as required. |
| 56 | Wiring for circuit/sub main wiring alongwith earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire |
| 57 | 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire |
| 58 | Wiring in existing conduit - supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface / recessed steel/PVC conduit as required.2x4 sq.mm. |
| 59 | TV in existing conduit - supplying and drawing co- axial TV cable RC- 6 grade copper conductor, PE insulated, with PVC sheath in the existing surface/recessed PVC conduit as required. |
| 60 | S/F of following sizes of PVC conduit alongwith the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required .20mm |
| 61 | S/F PVC/GI box fo following sizes on surface or in recess with suitable size of phenolic laminated sheet cover infront incliuding painting etc75mm x 75mm x 50mm deep/(4\\" x4\\") |
| 62 | 121mm x 173mm x 48mm deep (8\\"x6\\") |
| 63 | Supplying and fixing Modular type switch / socket: Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc. as reqd.5/6 amps. One way switch |
| 64 | 15/16 amps. One way switch |
| 65 | 3 pin 5/6 amps socket outlet |
| 66 | 3 pin 15/16 amps socket outlet |
| 67 | TV antenna socket outlet |
| 68 | S/F Modular type Electronic fan regulator:- Supplying and fixing following modular type electronic fan regulator- on the existing modular plate and switch box including connection but exculiding modular plate etc. as requried. |
| 69 | S/F Modular type blanking plate:- Supplying and fixing modular blanking plate on the existing modular plate and switch box exculiding modular plate etc. as requried. |
| 70 | Supplying and fixing 20A SPN MCB industrial socket outlet supply and fixing of 20A 240v, SPN industrial type socket outlet with 2 poles and earth metal inclosed plug top along with 20 amps 'C' series, SP MCB in sheet steel enclosure on surface or in recess with chained metal cover for socket outlet and complete with connections testing and commissioning etc as required. |
| 71 | Providing & fixing : Providing & fixing of MV danger notice plate of 200mm x 150mm. Made of mild steel at least 2mm thick and vitreous enamelled white on both sides and with inscription in single red colour on front side as required. |
| 72 | Supplying and fixing suitable size GI box with moduler plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps moduler socket outlet and 5/6 amps moduler switch , connection painting etc.as reqd. |
| 73 | Supplying and fixing suitable size GI box with moduler plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps moduler socket outlet and 15/16 amps moduler switch , connection painting etc.as reqd. |
| 74 | S/F 2 pin 5 amp celling rose on the existing junction box/wooden block including connection etc |
| 75 | Supplying and fixing batten / angle holder including connection etc as req. |
| 76 | ITC fluorescent fitting directly on surface :- Intallation testing and commissioning of pre wired fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on celling / wall including connection with 1.5sq. mm. FR PVC insulated copper conduit as requried. |
| 77 | ITC fluorescent fitting with down rods :- Intallation testing and commissioning of pre -wired fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. including supplying and fixing ball and socket arrangement 2 no. down rods of 20mm dia steel. directly on celling / wall including connection with 1.5sq. mm. FR PVC insulated copper conduit as requried. |
| 78 | ITC celling fan :- Intallation testing and commissioning of celling fan, including wiring the down rods of standerd leanth (upto 30mm) with 1.5sq. mm. FR PVC insulated copper conduit as requried. |
| 79 | ITC exhaust fan upto 450mm sweep: installation of exhaust fan upto 450mm sweep in the existing opening including making the hole to sult the size of the above fan making good the damage connection testing commissioning etc as required. |
| 80 | S/F S.P MCB DB Supplying and fixing following way single pole netural sheet MCB distribution board 240 volts on surface / recess complete with tinned copper busbar netrual ibulsbar earth bar din bar detachable gland plate interconnections phosphatized and powder painted including earthing etc as required (But without MCB/RCCB/ Isolator)8 way double door |
| 81 | S/F 'C' series SP MCB: Supplying and fixing 240 Volts, 'C' series, miniature circuit breaker suitable for inductive loads of follwing poles in the existing MCB DB complete with connections, tasting and commissioning etc. as required. 6/32 amps single pole |
| 82 | 40 amps TPN |
| 83 | Supplying and fixing four pole MCB isolator - Supplying and fixing following rating four pole 415 volts, isolator in the existing MCB DB complete with connections testing and commissioning etc as required. 40amps |
| 84 | 80/100amp |
| 85 | S/L 8 SWG copper wire in ground (for main panel and APFC panel) :- S/L 8 SWG G.I. wire in ground :- Supplying and laying 8 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as required. |
| 86 | P/F G.I. lightning conductor finial - Providing and fixing of lightning conductor finial, made of 25mm dia 300mm long, G.I. tube, having single prong at top, with 85mm dia 3mm thick G.I. base plate including holes etc. complete as required. |
| 87 | P/F G.I. lightning conductor tape in horizontal run - Providing and fixing G.I. tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run) |
| 88 | P/F G.I. lightning conductor tape in vertical run - Provding and fixing G.I. tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run) |
| 89 | Supply of ceilling fan :- Supplying and fitting of 1400mm sweep regular/standared model AC fan including connection with 1.5 sqmm copper wire down rod of standared length (upto 30cm.) with all acessories as required. |
| 90 | S.I.T.C. of following rating surface mounted LED tube light fitting suitable for 230V 50Hz, single phase supply etc. complete as required 20/22 W LED Tube light |
| 91 | Supplying and fixing of 9/10 Watt LED Bulb |
| 92 | Sanitary & water supply workSupplying, fitting and fixing viterous white glazed earthen ware I.W.C. of parry hindustan or any other I.S.S. approved make with 100mm H.C.I. 'p' trap 15 litres C.I. pull and let go flushing cistern of names or C.I. or C.C. brackets 32mm alkathene/ P.V.C telescopic flush pipe about 2M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair or viterous white glazed earthenware footrest to be fixed in floor 15mm C.I.580mm long width © With 10 lit low level P.V.C. cisterns |
| 93 | Bib cock (ISI Marked) |
| 94 | Bib cock (Long Thread) (ISI Marked) |
| 95 | 15mm C.P. extension Nipples |
| 96 | Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on pointed C.I. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms. 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I. |
| 97 | 100mm dia steel |
| 98 | Providing and fixing 15mm dia and 45cm. Long P.V.C Connection pipe with heavy quality brass coupling at both ends etc all complete as per specification and direction of Engineer- in - charge. |
| 99 | Providing and fixing 32mm waste pipe for sink or wash basin including P.V.C waste fittings complete |
| 100 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.20 mm nominal outer dia Pipes |
| 101 | 25 mm nominal outer dia Pipes |
| 102 | Angular stop cock (Long thread) (ISI Marked) |
| 103 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank. |
| 104 | Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink with drain board 510 x 1040mm bowl depth 178mm |
| 105 | Providing and fixing N.P/C.P. Brass/P.V.C. porcelain shower rose of 15mm inlet etc. All complete as per specification and direction of E/I.© 150mm dia C.P. Shower |
| 106 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter |
| 107 | 110 mm diameter |
| 108 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion75mm Coupler |
| 109 | 110mm Coupler |
| 110 | 75mm single pushfit Coupler |
| 111 | 110mm single pushfit Coupler |
| 112 | 75mm single tee with door |
| 113 | 110mm single tee with door |
| 114 | 75mm single tee without door |
| 115 | 110mm single tee without door |
| 116 | 75mm Bend 87.5° |
| 117 | 100mm Bend 87.5° |
| 118 | 75mm shoe (Plain) |
| 119 | 100mm shoe (Plain) |
| 120 | Supplying all materials , labour and tools and equipment's for drilling 200 x 165mm dia bore well all kind of soil and rock by using DTH super rig machineFrom 0.0M to 50.00 M below G.L. |
| 121 | From 51.00 M to 100.00 M below G.L. |
| 122 | (A) Supplying all materials , labour and inserting M.S. pipe 200mm internal dia (made with 6mm thick M.S. plate cashing pipe for protective bore well --- do ------ all complete job |
| 123 | (B) Supplying and fitting M.S. cap over 200mm dia cashing pipe |
| 124 | Cleaning flushing and developing of drilled hole for testing the discharge of water (4- hour operation) |
| 125 | Supplying fitting and fixing 2 HP submersible pump set 150mm dia. (with Bronze Impeller) up to 8 stages |
| 126 | Supplying, flat flexible submersible cable with copper conductor PVC insulated and PVC sheathed as per IS: 7098 3core 2.50sq mm |
| 127 | D.O.L. starter with SS enclosure with 380/415 Volt coil as per IS 3914 |
| 128 | Supplying 32mm G.I. pipe as per IS 1239 (part -01) 2004 ISI Marked/Medium Quality |
| 129 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25 mm nominal dia Pipes |
| 130 | ADD GST 18% |
| 131 | LABOUR CESS 1% Please Enable Macros to View BoQ information |
