|
| 1 | Dismantling & removing RCC Columns / Beams / Slab including stacking the useful materials for reuse & removing the debris within 50m lead with cost of all labour etc. complete as directed by the Engineer in charge. (Ground Floor) |
| 2 | Dismantling & removing Brick / Stone Masonry in C.M./L.M. upto 3.0m height including stacking the useful materials for reuse & removing the debris within 50m lead with cost of all labour etc. complete as directed by the Engineer in charge.(Ground Floor) |
| 3 | Dismantling terraced roof (Madras or Orissa) including stacking the useful materials for reuse and removing the debris within 50m lead with cost of all labour etc. complete as directed by the Engineer in charge.2nd Floor |
| 4 | Dismantling & Removing old tile flooring including stacking the useful materials for reuse and removing the debris within 50m lead with cost of all labour etc. complete as directed by the Engineer in charge.(Ground Floor) |
| 5 | Dismantling & Removing old tile cladding from walls including stacking the useful materials for reuse and removing the debris within 50m lead with cost of all labour etc. complete in all respect as directed by the Engineer-in-charge. (Ground Floor) |
| 6 | Earth work in excavation of foundation trenches in ordinary soil including dressing of sides and levelling the bed and depositing the excavated materials away from the work site within initial lead & lifts etc. complete as directed by the Engineer in charge. |
| 7 | Supplying and filling in foundation and plinth with sand, laying in layers, well watered and rammed including cost, conveyance, royalties and taxes of all materials, cost of all labour and T&P etc. complete in all respect as per direction by the Engineer in charge. |
| 8 | Providing and laying PCC (1:3:6) in foundation and floors using 4cm size crushed stone granite aggregates including laying in layers, ramming, watering and curing etc. complete including cost, conveyance, royalties, taxes of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in-charge. |
| 9 | Providing and laying PCC / RCC (1:2:4) in all floors using 12mm size crushed stone granite aggregates including laying in layers, ramming, watering and curing etc. complete including cost, conveyance, royalties, taxes of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in-charge. (Ground Floor) |
| 10 | Fly ash brick masonry in all floors with cement mortar (1:4) using bricks of 25cm size, after immersing Bricks before use with watering, curing etc. complete including cost, conveyance, royalties, taxes of all materials, cost of all labour, all T&P etc. complete in all respect as directed by the Engineer-in-charge. (Foundation) |
| 11 | Ground Floor |
| 12 | R.C.C. work of M.25 in different work using 20 mm & down graded size crushed stone granite aggregates including hoisting lowering, laying concrete and compacting by using vibrators, watering, curing and necessary centring & shuttering for smoth finishing of work excluding steel reinforcement work including cost, conveyance, royalties, taxes of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in-Charge. (Column Shaft-Ground floor) |
| 13 | Roof Slab (Ground Floor) |
| 14 | 2nd Floor |
| 15 | Shelve Ground floor |
| 16 | Straightening cutting, bending & binding of bent up or coiled rods confirming to I.S. 432 for Plain and 1785 for Tor steel and binding, tying the grills, hoisting, lowering and placing in proper position including cost, conveyance and taxes of all materials and cost of all labour with all T&P required for the work etc. complete as directed by the Engineer- in-Charge. (Ground Floor) |
| 17 | 2nd Floor |
| 18 | Providing 12 mm thick C.P. with C.M. (1:6) on surface of wall with screened and washed sharp sand for mortar and finished smooth including watering and curing with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. Inside surface (Ground Floor) |
| 19 | Providing 16 mm thick C.P. with C.M. (1:6) on inside surface of wall with screened and washed sharp sand for mortar and finished smooth including watering and curing with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. (Ground Floor) |
| 20 | Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size crushed stone granite aggregates including laying, watering and curing etc. complete including cost, conveyance, royalties, taxes of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in-charge. (2nd Floor) |
| 21 | Supplying, fitting, fixing of Vitrified industrial tiles (30cm x 30cm) in floors over 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. Ground Floor |
| 22 | Supplying, fitting, fixing of Granite tiles of size above 0.4sqm (Pulished) in floors over 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. (Ground Floor) |
| 23 | Supplying, fitting, fixing of Ceramic wall tile in all floors over 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. (Ground Floor) |
| 24 | Supplying, fitting, fixing of Vitrified industrial tiles (30cm x 30cm) in dadoo in all floors over 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. (Ground Floor) |
| 25 | Supplying, fitting, fixing of Vitrified tile of size (600mm x 600mm) in dadoo in all floors over 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. (Ground Floor) |
| 26 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 27 | Providing Cement concrete Bench including cost of all materials,labour.complete as per the direction of the Engineer-in-charge. |
| 28 | Providing fitting and fixing in position steel grill gate with steel decorative square pipe and flower of approved drawing and design including cutting bending to proper sizes fitted and fixed including cost, conveyance, royalties and taxes of all materials, cost of all labour, sundries and T&P etc. required for the work complete, as per direction of the Engineer in charge. |
| 29 | Supplying fitting and fixing of stainless steel Letter including cost, conveyance of all materilas and labour,T&P required for the work as per direction of Engineer-in-charge. |
| 30 | Providing fitting and fixing G.I. Square bar grill and gate of approved drawing & design including cutting bending the angles and flats to proper sizes welding chamfering etc including cost, conveyance, royalties, taxes of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in-charge. |
| 31 | Providing fitting and fixing of different dia G.I. pipe including cutting to sizes and welding as per approved design etc including cost, conveyance, royalties, taxes of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in-charge. |
| 32 | Supplying fitting and fixing of 750mm dia Razor wire concertina coil of length 6mtr clipped with 2 nos of straight line Razor wire with Ms Angle of size 50x50x6mm in C.C.(1:2:4) on the compound wall provided in the distance of 2.5 mt. c/c ,fixing & tying the Razer wire concertina coil on compound wall fixing with J clip over lappings ,painting two coats over a coat of primer to M.S. angles including cost of all labour, T&P required including scaffolding for the work etc. complete in all respect as directed by the Engineer in charge. |
| 33 | Supplying, Fitting & Fixing of profile colour Sheet including cost of fittings etc. including cost, conveyance of all materials and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge . |
| 34 | Finishing plastered surfaces with cement putty (water based) of approved make on plaster / concrete surface and finishing the surface smooth and even by sand papering to receive paint in walls, at all heights with staging wherever necessary with cost, conveyance, taxes of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. Inside surface Ground floor |
| 35 | Painting two coats with approved weather seal paints of approved colour, shade on wall surface over a coat of wall primer including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. Outside surface- Ground Floor) |
| 36 | Painting two coats with plastic emulsion paint over a coat of water bond cement primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. (Ground Floor) |
| 37 | 2nd Floor |
| 38 | Painting two coats with approved enamel paints of approved colour, shade over a coat of primer over new Iron work including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. (Ground Floor) |
| 39 | Providing painting of two coat of weather coat paint over one coat primer of approved quality over the colour mastic including painting charges of decorative painting after scrapping with scraper and washing properly with soap water or soda complete as directed by the Engineer-in-charge.(Ground Floor) |
| 40 | Shifting of excavated earth / debries from work site to outside up to 5km lead by transporting with cost of transporting & labour etc complete as per direction of Engineer-In-Charge.. |
| 41 | Providing GSB Gr-vi materials, spreading in uniform layers with motor grader, mixing by mix in place method at OMC and compacting with vibratory roller to achieve the desired density including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Clause - 401 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 42 | Supplying and fixing of Pre cast kerb stone of size 600mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect confirming to IS 5758:1984 including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. |
| 43 | Providing & laying of 80 cm thick cement concrete interlocking paver block of M-30 grade of approved make, veriety, colour & size made by block making machine with strong vibratory compaction of approved design and shape laid in required colour paitern over a prepared bed, filling the joints with sand etc all complete including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. |
| 44 | E.I Work Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5Amp, 250V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/ L&T/ Anchor/ Polycab/ Havells/ Great white/ RR/ V-Guard/ HPL) Group-A -L.P- F.P- C.B.P- |
| 45 | Group-B L.P- F.P- C.B.P- |
| 46 | Group-C L.P- F.P- C.B.P- |
| 47 | Recessed wiring for light / power plug with 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC flexible conduit alongwith 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing as required. Finolex/ L&T/ Anchor/ Polycab/ Havells/ Great white/ RR/ V-Guard/ HPL) |
| 48 | Separate Point wiring to 5A /6Amp socket outlet with 2 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20mm dia non-metallic PVC flexible conduit with piano type switch, Phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required (Make of wire -Finolex/ L&T/ Anchor/ Polycab/ Havells/ Great white/ RR/ V-Guard/ HPL) |
| 49 | Supply and fixing of 5 Amp plug with switch on existing board (Piano type/cover including connection etc. as required ) (Make - Cona/ Anchor/ Greatwhite) |
| 50 | Supply and fixing of metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing of 5pin 5/6 & 15/16Amp socket outlet and 15/16Amp piano type switches connection painting etc. as required. (Make- Anchor/ Cona/ HPL/ Greatwhite) |
| 51 | S/F of Electronics type Fan Regulator (Make - Cona/ Anchor/ HPL/ Graetwhite) |
| 52 | S/F of Computer board consisting of 3Nos 5amp Switch and socket including all connection. (Make - Cona/ Anchor/ HPL/ Graetwhite) |
| 53 | Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex/ L&T/ Anchor/ Polycab/ Havells/ Great white/ RR/ V-Guard/ HPL) 2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia |
| 54 | 2 X 2.5 sq.mm +1 X 1.5 sq.mm -do- |
| 55 | 2 X 4 sq.mm +1 X 1.5 sq.mm -do- |
| 56 | 2 X 6 sq.mm +1 X 2.5 sq.mm in 25mm dia |
| 57 | Supply and drawing of following sizes FR PVC insulated single core multistrand copper conductor in existing surface/ recessed/ STEEL / PVC conduit as required. 1 X 1.5sqmm |
| 58 | S/F of 3 pin, 5 amp ceiling rose ISI marked on the existing junction box / wooden block including connection etc as required. (Make - Cona/ Anchor/ Greatwhite) |
| 59 | S/F of Ding dong bell (Make - Cona/ Anchor/ Greatwhite) |
| 60 | S/F of Bakelite angle holder/batten holder of ISI marked including connection etc as required .(Make - Cona/ Anchor/ Greatwhite) |
| 61 | S/F of 32A Flash type DP switch (Make - Cona/ Anchor) |
| 62 | S/F of Clamp & S.hook |
| 63 | Supply of fixing of 40 mm GI Brackt with 2 nos GI clamp & 4 nos 3'' Anchor fasteners for fixing of street light. |
| 64 | Supply of following PVC Aluminium armoured XLPE cables insulated ISI marked .(Make- Havells/ Polycab/ KEI / V-Guard/ Gloster)2cx10sqmm |
| 65 | Laying of cable on surface Laying and fixing of one number of PVC insulated and PVC sheathed/ XLPE power cable of 1.1KV grade of size not exceeding 25 sq.mm on surface as required. |
| 66 | Supply and fixing of Different type LED Lights (Make-Havells/ Cromption/ wipro/ panasonic/ Philips) 20 Watt 4 inch LED tube lights |
| 67 | Supply and fixing of LED street light (Make-Havells/ Cromption/ wipro/ panasonic/ Philips) 60watt |
| 68 | Supply and fixing of Different type fan (Usha - striker/ Crompton - Super breeze Deco/ Havells - samraat/ Orient - pspo/ Or equivalent) 48\\" Ceilling fan |
| 69 | S/F of Exhaust fan12\\" (Make - Havells/ Usha/ Crompton/ Almonard) |
| 70 | MCB Enclosour (Make - Havells/ L&T) DP |
| 71 | MCCB encloser (Make - Legrand/ Simens/ Hager/ Schinder) 63A - 160A |
| 72 | Supply and fixing of following different DD DB BOX .(Make-Havells/ C&s/ L&T) 8way, SPN DD DB BOX. |
| 73 | 12way,SPN DD DB BOX. |
| 74 | Supply and fixing of 6Amp to 32A rating 240 V/415 V \\"C\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make- Havells/ L&T/ C&S) 6 to 32 SP MCB |
| 75 | 6 to 32 DP MCB |
| 76 | 63A DP MCB |
| 77 | Supply and fixing of 4pole MCCB Thermal Mangnetic Protection in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required.(Make- Havells/ C&s/ L&T) 63 A to 100A 25KA |
| 78 | Kitkat(porcelain fuse carrier and base ISI Marked) (Make - Jubas/ GEC/ Or equivalent) 63A/ 415V |
| 79 | 100A/ 415V |
| 80 | Busbar Chamber with copper strip (Make - Bharat/ Gec) 63A 4way |
| 81 | 100A 4way |
| 82 | Supply ,installation, testing and commissioning of main switches (IS 13940 part-3/1993) of following capacity on existing surface / wall mounting and completer with HRC fuse links, interconnections, earthing , etc as required as per direction of Engineer-in-charge. (Make- HPL/ Anchor/ RK/ Siemens/L&T/C&S) 32Amp ICDP main switch with M.S board. |
| 83 | 63Amp ICDP main switches with MS board |
| 84 | Earthing. Supply and fixing of G.I Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary with charcoal and salt as required. |
| 85 | Extra for using salt and charcoal for G.I or copper pipe earth elctrrode as required |
| 86 | Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing along with existing surface / recessed conduit as required. |
| 87 | Providing and fixing of extra down rod of 20 cm length G.I pipe 20 mm dia heavy gauge including painting etc as required. |
| 88 | S/F of 2.5 Capacitor for Ceiling Fan Please Enable Macros to View BoQ information |