|
| 1 | Schedule 'A' Section - I |
| 2 | Dismantling of plain or corrugated steel sheeting any gauge in roof covering complete all as specified |
| 3 | Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 4 | Supply and fixing Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. |
| 5 | Supply and fixing of rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantry, rails, fastening, heavy bracket framing (Beam, tee, angle, channel or flat section), including distance pieces, cleats etc as in addational support to strucrure confirming to Fe – 410 – S including cutting, welding etc. complete all as specified and directed. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all asspecified and directed. |
| 7 | Material and labour Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in C.M 1:6. |
| 8 | Material and labour for Non skid joint free ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade complete all as specifed and as directed. |
| 9 | Material and labour glazed ceramic coloured/printed tiles 450mm x 300mm x 6 to 7mm thick on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick bedding layer in cement mortar (1:3) including necessary cutting as per site requirement complete all as specified and directed. |
| 10 | Supply and fixed 18-20 mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and like in cement mortor 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs etc all as specified and directed. |
| 11 | Form work to chullah hoods, chajjas, troughs and similar items including edges flat and rough finished complete all as specified and as directed. |
| 12 | Supply and fixing mild steel framed work as in grills, gratings etc with ends of bars shouldered and riveted or forged into spikes, framed guard bars, barred iron doors etc, conforming to Fe-290, Gde-E-165 all as specified and directed. |
| 13 | Material and labour for precast manhole, drain covers in precast cement concrete Type B-1,1:2:4 (using 20mm graded crushed stone aggregates) set in cm 1:6 complete all as specified and as directed. |
| 14 | Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specifed & as dierected. |
| 15 | Material and labour RCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as chajja, fins, louvers, roof projection ,beam and lintel after removing of loose concrete and preparation of surface by application of derusting chemical such as Dr fixit rust remover or equivalent and welding additional main bars/distribution bars by inserting to adequate depth in beam by drilling , priming reinforcement bar old/new with a coat of anti corrosion Nitozinc primer of M/s FOSROC, including necessary scafolding as required height upto 8 Mtr, complete all as specified and directed.Note:- 1. Rates include for necessary scafolding etc. 2. Reinforcement will measured and pid separately. |
| 16 | Material and labour for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as in chajja, ceiling etc. & applying Two coats of Alkali & fungal resistance, dirt resistance exterior paint of required shade complete all as specified and directed by Engr-in-Charge. |
| 17 | Material and labour PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in surface channel and drain complete all as specified. |
| 18 | Taking down cement plaster on brick, concrete stone surfaces etc including raking out joints, hacking for key, scrubbing down with water etc. |
| 19 | Material and labour 15 mm thick rendering in cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specifed and as directed. |
| 20 | Material and labour for 5 m thick rendering in cement mortar (1:3) on brick or concrete surfaces of ceiling finshed even and smooth without using extra cement. |
| 21 | Material and labour for 5 mm thick plaster in cement mortar 1:4 on brick or concrete surfaces over10 mm thick backing coat in cm 1:4 and finishing the surfaces even &smooth without using extra cement complete all as specifed and as directed. |
| 22 | Material and labour for preparation of new cement plaster surfaces and applying two coats of oil bond distemper over 1.0 mm thick wall care putty to obtain smooth finish complete all as specified & directed. |
| 23 | Complete removal of existing treament from wall surfaces by wire brushes & stopping of surfaces & leveling/edging the disturbed surface /edges using 1.0 mm thick fillig compound of birla/Jk wall care putty to obtain smooth regular /even finish using sand paper and applying two coats of OBD complete all as specified and directed. |
| 24 | Material and labour for preparation of old plastered or unplastered surfaces of ceiling including cornices and applying two coat of oil bond distemper complete all as specified & directed. |
| 25 | Preparing newly plastered surfaces of ceiling and applying two coats of oil bond distemper over a coat of primer all as specified & directed. |
| 26 | Material and labour for prepration of newly plastered surface and applying two coats of Alkali & fungal resistance, dirt resistance exterior camouflage paint of required shade over a coat of 1mm thick wall care putty complete all as specified and directed by Engr-in-Charge |
| 27 | Material & labour, preparation of new/old (plastered or unplasterd) surfaces of walls including brooming down, washing, rubbing down using sand paper, stopping distrubed surfaces, planes/edges with white cement putty & rubbing with sand paper to obtain regular and smooth surfaces, and applying two coats of exterior acrylic emulsion anti weather & anti algae paint (1st quality paint),or as in camouflage, using number of colours as approved, over and including a coat of alkali resistant primer, complete all as specified and directed. Note (s):-(i) Pattern of camouflage if any shall be as approved by GE.(if any)(ii) Rate quoted by contractor shall be deemed to include the cost of use and waste of necessary ladder, wooden platform etc,. as may require to execute work at any height upto 12.00 metre.(iii) Painting work shall stand guaranted against fadding/Peeling off for 03 years & the cost agaist this aspect, shall be deemed included in the unit rate quoted for this item. |
| 28 | Supply and fixing in repair 75 mm sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints,laid in trenches or in floors complete all as specified & as directed. |
| 29 | Supply and fixing in repair 75 mm sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified |
| 30 | Supply and fixing in repair 100 mm sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints,laid in trenches or in floors complete all as specified |
| 31 | Supply and fixing in repair 100 mm sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified |
| 32 | Supply and fixing in repair 100 mm Branch pieces, single (equal or unequal), ordinary or inverted(spigot or socket type) or with parallel branches, complete all as specified and directed. |
| 33 | Supply and fixing in repair CI Bends (any radius), diminishing pieces or tapers (larger bore measured) , 100mm bore complete all as specified and directed. |
| 34 | Supply and fixing in repair CI Bends (any radius), diminishing pieces or tapers (larger bore measured) , 75 mm bore complete all as specified and directed. |
| 35 | Supply and fixing in repair CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches suitable for 75 mm bore complete all as specified |
| 36 | Supply and fixing PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl jointing with solvent cement complete all as specified and directed. |
| 37 | Dismantling of water tanks exc 250 ltrs & n. exc 500 ltrs capacity and removing to store complete all as specified and directed. |
| 38 | Supply and fixing PVC water storage tanks white colour of 500 ltrs capacity rotational moulded (tripple layered cylindrical vertical with closed top) hoisted and fixed in position all as specified |
| 39 | Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 40 | Supply and fixing 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches complete all as specified and directed. |
| 41 | Taking up or down 20 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 42 | Supply and fixing 20 mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches complete all as specified and directed. |
| 43 | Supply and fixing in repairs Wash Hand Basin, Vitreous China (flat back or angle back type) of size 550 x400mm, including cutting for and pinning in ends of brackets or erecting stand, PTMT waste coupling, waste pipe complete all as specified and directed. |
| 44 | Supply and fix brass CP fancy type piller tap,for wash hand basin screwed for iron pipe 15 mm bore,complete all as specified and directed. |
| 45 | Supply and fixing, Vitreous China, wash down water closed pan \\"ORISSA PATTERN\\" of size 580 x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including all necessary connection and provision of lime concrete beeding as in repairs complete all as specified and as directed. |
| 46 | Supply and fixing in repair 15mm bore CP fancy type brass bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed (weight not less than 400gms) complete all as specified and directed. |
| 47 | Supply and fixing in repair 15mm bore angle cock CP fancy type with butter fly handle, screwed down, high pressure for iron pipes or for unions fixed in repairs (weight not less than 400gms) complete all as specified and directed. |
| 48 | Supply and fixing PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 49 | Taking down shutters of any descriptions exc 1 sqm but n exc 2 Sqm each and refixing in the same opening after repair complete all as specified and directed. |
| 50 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exc 4 Sqm complete all as specified and directed. |
| 51 | Ditto as above but area not exc 1.50 Sqm complete all as specified and directed. |
| 52 | Supply and fixing Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube, suppling & fixing in opening as per specification complete all as specified and directed. |
| 53 | Supply and fixing factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded premale PVC sheet on the front face & 4mm thick prelam PVC sheet on back face, centre core will be PVC battern supplying & fixing in frame at site complete all as specified and directed by Engineer-in-Charge. |
| 54 | Supply and fixing Pressed steel frames for doors of size 125mmx60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified. |
| 55 | Supply and fixing 40 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 56 | Cutting holes in brick wall built in cement mortar for inserting holdfasts, depth of embedded portion of holdfasts or lugs measured from the face of jamb into the wall exc half brick but not exc one brick and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required complete all as specified and directed. |
| 57 | Supply and fix, steel window box type, primer coated, comprising ERW Hollow `P’ section of size 60mmx25mm of 1.25mm wall thickness frame, single rebated, skeleton shutter (suitable for wire gauge), made of ERW section 50mmx20mm of 1mm wall thickness, and operated leaf side hung, without glazing bars but including Flat iron 12mmx03mm for securing wire mesh, dove tailed or welded/revitted welded to frame of shutter, and openable shutter prepared to receive wire gauge, complete , including cutting holes four Nos for each window and making good disturbed portion in PCC (1:3:6) type C-1, including following fittings welded to frame/shutter :-(a) Hold fast 150mm long out of 25x6mm flat iron made to shape - 04 Nos each window (02 Nos on each side).(b) Handle of `Z’ section 20x25mm, 100mm long - 01 No (each leaf).(c) MS tower bolt 150mm long - 02 Nos (each leaf).(d) `Z’ section 20x25mm, 100mm long stopper - 01 No (each leaf).(e) Cleat 55mm long of hollow square section 15mmx15mm of 24 gauge wall thickness, welded to hinge of 55 mm size - 01 No (per leaf).(f) MS box type hinges of 75mm size - 03 Nos (per leaf).(g) Fabrication and fixing compete as per approval & drawing.Note(s) : -(i) Wire gauge and painting shall be measured and paid separately under respective items. (ii) Design shall be approved from the Engineer-in-Charge as per Drg No CEAF/STD-185/2012 sheet 1/2 to 2/2 before fabrication and bulk order to the manufacturer. |
| 58 | Supply and fix, steel window box type, primer coated, comprising ERW Hollow `P’ section of size 60mmx25mm of 1.25mm wall thickness CRCA sheet frame, single rebated, skeleton shutter (suitable for glazing), made of ERW section 50mmx20mm of 1mm wall thickness, and operated leaf side hung, with two Nos glazing/sash bars of `T’ section 20x3mm welded to frame of shutter, prepared to receive glass, complete with one shop coat of zinc chorme or red oxide primer, including cutting holes four Nos for each window and making good disturbed portion in PCC (1:3:6) type C-1, including following fittings welded to frame/shutter:-(a) Hold fast 150mm long out of 25x6mm flat iron made to shape - 04 Nos each window (02 Nos on each side).(b) Handle of `Z’ section 20x25mm, 100mm long - 01 No (each leaf).(c) MS tower bolt 150mm long - 02 Nos (each leaf).(d) `Z’ section 20x25mm, 100mm long stopper - 01 No (each leaf).(e) Cleat 55mm long of hollow square section 15mmx15mm of 24 gauge wall thickness, welded to hinge of 55 mm size - 01 No (per leaf).(f) MS box type hinges of 75mm size - 03 Nos (per leaf).(g) Fabrication and fixing compete as per approval of Engr-in-Charge.Note(s) : -(i) Glazing and painting shall be measured and paid separately under respective items. (ii) Design shall be approved from the Engineer-in-Charge before fabrication and bulk order to the manufacturer. |
| 59 | Supply and fixing Figured glass 4 mm thick, pin headed type and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified. |
| 60 | Supply and fixing Sheet glass 4 mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified. |
| 61 | Supply and fixing Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm etc all as specified. |
| 62 | Supply and fixing 100mm Mild steel butt hinges, medium weight, cold rolled complete with stainless steel screw etc. all as specified as directed. |
| 63 | Supply and fixing 200 mm long aluminium anodized barrel tower bolts of extruded section and fixed in repairs, complete all as specified. |
| 64 | Supply and fixing 125 mm extruded aluminium alloy handles, fabricated type, anodised, complete all as specified. |
| 65 | Supply and fixing pre coated mild steel floor door stopper ,tongue anodized 140mm length including vulcanised rubber piece complete all as specified. |
| 66 | Supply and fixing MS window guard bars, window frames etc articles confirming to Fe 410-0 or Fe 310-0 complete all as specified. |
| 67 | Material and labour for preparing new wooden surfaces of any description, not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified. |
| 68 | Material and labour for preparation of old surface of wood and wood based materials over 10 Cm width or girth and applying one coat of synthetic enamel paint as directed and specified. |
| 69 | Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces. |
| 70 | Material and labour for applying one coat of synthetic enamel paint to old steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of old steel surfaces. |
| 71 | Demolition of Brickwork or stone/ boulders masonry built in cement or cement lime mortar incl all quions, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 72 | Material and labour brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius in CM 1:6 complete all as specified. |
| 73 | Excavation in trenches in hard dense soil n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or shafts, wells, cesspits, manholes, pier holes etc and getting out complete all as specified. |
| 74 | Returning , filling in, including spreading, leveling, watering and well ramming in layer n.exc 25cm depth in layer complete all as specified. |
| 75 | Removal excavated materials to distance n.exc 50 metre and depositing where directed at a level n.exc 1.5metre above the starting pointing in soil, complete. |
| 76 | Demolition of SGSW drain pipe of any bore with PCC bedding/hunching cradle jointed in cement mortar and taking out of trenches if required with fittings all as specified. |
| 77 | Material and labour cement concrete (1:4:8) type D-2 using 40mm stone aggregate to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipe |
| 78 | Material and labour Reinforced concrete pipes, class NP2, 150 mm dia laid and jointed complete with collars laid in trenches and jointed in cement mortor as specified. |
| 79 | Supply and fixing in repair PVC valve less, symphonic action type flushing cistern, low level white including inlet, ball valve, float handle including brackets of 10 ltrs capacity including flush pipe complete all specified and directed. |
| 80 | Material and labour for 20 mm thick screed bed in CM 1:6 for laying floor tiles complete all as specified & as directed. |
| 81 | Material and labour chequered cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement & no pigment complete. |
| 82 | Material and labour Plain cement concrete (1:3:6) type C-1, using 20 mm graded mechanically crushed stone aggregates as in roof kerbs, padding to roof to maintain the required slope etc complete all as specified and directed. |
| 83 | Material and labour for cleaning of roof slab surfaces including sweeping clean & washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane complete all as specifid. (a) Material and labour for preparation of plaster surfaces /RCC roof surfaces and applying one coat of oil bound bituminous primer @0.03 ltr/SQM. (b) Material and labour for applying blown type bitumen @1.20KG/SQM of grade 85/25 .(c) Supplying and laying modified polymeric water proofing membrane super thermo lay 3 mm thick of weight not less than 3.00 KG/SQM reinforced with polyester non woven fabric weight not less than 150 gm/SQM center core including coping on the surfaces with torch application of membrane with 10cm over laps as required all complete all as specified and directed. |
| 84 | Material and labour for two coats of aluminium paint incl preparation of new surface complete all as specified and directed. |
| 85 | Material and labour for 75 mm thick plain cement concrete type C-2, 1:3:6, (40mm graded stone aggregate)as in plinth protection, finishing the top surfaces even and smooth W/O using extra cement complete all as specified. |
| 86 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement |
| 87 | Taking down carefully copper/aluminium point wiring (light, fan, bell, socket, or power socket) complete fitting such as switches, sockets, lamp holder, utility light fitting, fan regulator, ceiling rose incl existing PVC/Steel conduit/ casing caping etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed. |
| 88 | Taking down of carefully unserviceable sub-main wiring of any size from concealed/ casing caping/ conduit complete all as specified and directed. |
| 89 | Material & Labour for flame proof point wiring with 2 runs of 1.5 Sqmm (Nominal area),1100 Volt grade, PVC insulated unsheathed single core multi stranded FRLSH copper conductor cable and one run of 1.5 Sqmm PVC insulated copper conductor cable for earthing lead in and including ERW rigid steel heavy duty conduit concealed in wall/ ceiling with all conduit fittings, accessories like elbow, tee and steel sunkun box for fixing arrangement of flame proof switch/ socket etc as per site requirement for one light point/ fan point (ceiling/exhasut) controlled by one switch complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 90 | Material & Labour for flame proof point wiring with 2 runs of 1.5 Sqmm (Nominal area),1100 Volt grade, PVC insulated unsheathed single core multi stranded FRLSH copper conductor cable and one run of 1.5 Sqmm PVC insulated copper conductor cable for earthing lead in and including ERW rigid steel heavy duty conduit concealed in wall/ ceiling with all conduit fittings, accessories like elbow, tee and steel sunkun box for fixing arrangement of flame proof switch/ socket etc as per site requirement for one light point/ fan point (ceiling/exhasut) controlled by one switch complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
