|
| 1 | Earthwork in excavation for foundation of structuresupto 3 m depth as per drawing and technicalspecification Clause 1104 for Rural Roads of MORDincluding setting out, construction of shoring andbracing, removal of stumps and other deleteriousmatter, dressing of sides and bottom and backfillingwith approved material. |
| 2 | Providing and laying Design Mix concrete for plain /reinforced concrete work in any part of bridge(excluding bottom plugging) with coarseaggregates of appropriate nominal size andgrading, fine aggregate (sand) conforming toproper grading zone, both of approved quality andcement, as necessary, including labour, cost andcarriage of all materials and including preparationof design mix, approval of the same by theEngineer-in-Charge and cost for quality control,sampling, testing etc. all complete but excluding(BASE LAYER )M-15 GradeUsing concrete mixer |
| 3 | Providing and laying Design Mix concrete for plain /reinforced concrete work in any part of bridge(excluding bottom plugging) with coarseaggregates of appropriate nominal size andgrading, fine aggregate (sand) conforming toproper grading zone, both of approved quality andcement, as necessary, including labour, cost andcarriage of all materials and including preparationof design mix, approval of the same by theEngineer-in-Charge and cost for quality control,sampling, testing etc. all complete but excluding |
| 4 | Hire and labour charges for Shuttering with orwithout staging upto 4.0 m height using approvedstout props with wooden planks/ply wood/steelsheet plate with required bracing for any kind ofplain or reinforced concrete works in all sorts ofminor structure including culvert, box culvert, crossdrainetc. The rate is inclusive of fitting, fixing andstriking out after completion of work as perspecification and directionWhere staging is not required |
| 5 | Supplying, fitting and placing un-coated HYSD barreinforcement in Bridge Foundation including initialstraightening, straightening of coils bars, removal ofloose rust (if any), cutting to requisite lengthbending, binding with annealed wire not less than 1mm in size and conforming to IS 280 at everyintersection hooked and bent to correct shape andplaced on forms etc. including cost of blackannealed wire and cost of loading, unloading,carriage of all steel materials complete as perdrawing and technical specifications and directionof Engineer-in-charge.The rate provided is exclusive of cost of steelmaterials. Construction wing should add cost &carriage of 1.05 MT (considering 5% wastage) ofsteel materials to arrive at the final consolidateditem rate. |
| 6 | Providing & fixing Concrete Sign Board as per IRCspecification of size 900 x 750 x 37 mm. thick madewith RCC 1:1½:3 with pakur variety stone chipsreinforced with double layer IRC febric (75 x 75 mm.mesh) and fixed with necessary nuts & bolts on twoRC precast posts 100 mm. x 150 mm. of height 2.65m. of which top 750 mm. is of section 100 x 13 mm.and 1.90 metre above GL & 0.75 metre below GLincluding digging hole, repacking the same withcement concrete 1:3:6 with jhama khoa or with localstone chips etc. complete including painting twocoats on both faces lettering sign marks etc. as perdirection of the Engineer-in-Charge. (The rate isinclusive of cost of reinforcement, concrete,shuttering, nuts & bolts, washer etc. complete.) |
| 7 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]20 MM (1:6) |
| 8 | Neat cement punning about 1.5mm thick in wall,dado,window sill,floor etc.NOTE:Cement 0.152 cu.m per100 sq.m. |
| 9 | GST 18 % |
| 10 | Cess 1 % Please Enable Macros to View BoQ information |
