|
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | M&L for plain cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in surface channels and base of drains complete all as specified and directed. |
| 3 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds , mitred/stopped ends etc complete. |
| 4 | Demolition of brick work in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 5 | M&L brick work with fly ash bricks straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 6 | M&L brick work with sub class B bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar except brick complete all as specified and as directed. |
| 7 | Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc. |
| 8 | M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and smooth without using extra cement with WPC as per manufacture instruction complete all as specified. |
| 9 | Supply only liquid water proofing compound |
| 10 | M&L for two coats of exterior weather proof anti fungal paint over a coat of 2 mm thick wall care wall putty incl preparation of new surface of wall or complete removal of paint on old surfaces of wall complete all as specified and as directed. |
| 11 | M&L for one coats of cement base paint incl preparation of old decorated surface of wall complete all as specified and as directed. |
| 12 | M&L preparing Old plastered or unplastered surfaces of wall and applying one coat of white wash on old decorated surface of wall complete all as specfied and directed. |
| 13 | M&L for one coats of weather coat floor guard or red apex paint incl preparation of old decorated surface of wall/path complete all as specified and as directed. |
| 14 | Cleaning /clearing blocked sewage line 100mm to 300mm dia (PVC/ SGSW/RCC hume pipe) any depth by rodding between manhole to manhole manually incl pumping out sludge water from manholes septic tank/soak well etc (where required) including providing trolley mounted pump set with suction pipe of adequate length and minimum 30 mtr delivery pipe including clearing spot blockages of WC, wash hand basins, sinks floor traps, NT and drainage pipes etc with and incl 2 safaiwala at 0900hrs to 1700 hrs on working days incl disposal of debris spoils and sludge hygiencially complete all a specified and directed. (Notes:- i) The contractor /his authorise supervisor of the work will report daily at complain cell AGE B/R at 0830 hours to receive day to day complaints. ii) All sewage complaints must be attended immediatly on receipt but not later than 24 hours. iii) Recovery (penalty ) for not attending complaint beyond 24 hours shall be Rs. 100.00 per compaints per day delayed |
| 15 | Digging out sludge etc from oxidation pond, septic tank, sump well, man holes including depositing in pits where directed to a distance exc 50m but n exc 250m complete all as specified and directed . Note- The unit rate quoted under this item shall deemed to include all the arrangement of necessary T&P with man and material for lifting up sludge from oxidation pond, septic tank, sump well, man holes,excavation of pit ,deposing sludge and cover with earth complete all as specified and directed. |
| 16 | Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 17 | M & L Glazed ceramic coloured tiles in vertical surface 450 mm x 300 mm x 7 mm thick set and jointed in neat cement slurry and pointed in white cement or colour cement including 10 mm thick in CM 1:4 complete all as specified and as directed. |
| 18 | M&L providing non- skid glazed ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n. exc 0.11 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed. |
| 19 | M&L providing polished glazed ceramic tiles coloured 10 mm thick (square/rectangular) area of each tile exceeding 0.42 sqm but n. exc 0.72 sqm, in floor etc including 15 mm thick screed bed in CM mortar 1:6 set and joited with neat cement slurry and pointed in coloured cement inclu to match coloured tiles complete all as specified and as directed. |
| 20 | M&L for preparation of sunken floor and applying a coat of hot bituminous primer @ .30 kg/sqm and applying a coat of industrial bitumen 85/25 @ 1.20 kg/sqm over primer and laying modified polymeric water proofing membrane(weight not less than 3 kg/sqm 2 mm thick consisting 100 mm micron HMHDE FILM ) and applying one coat of industrial btumen grade 85/25 @ 1.2 kg/sqm on top of membrane with 100 mm overlap at side end lap where required over 10 mm thick rendering in CM 1:4 including integral waterproofing compound 3% and taking down existing plastering as per manufacturer instruction and complete all as specified and directed |
| 21 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed. |
| 22 | Supply only plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed. |
| 23 | S&F in repair vitreous china squatting pan \\"orissa\\" pattern size 580mm*440mm white with integral foot rests excluding flushing cistern and flush pipe all as specified and directed |
| 24 | S&F in repair for CP Health Faucet with 1 Meter Flexible tube & Hook complete all as specified an directed. |
| 25 | Taking up or down existing GI Tubing15 mm dia & connections including cleaning for refixing or removal to store all as specified and as directed |
| 26 | S&F,20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 27 | S&F in repairs 15mm bore pillar tap cast copper allloy with capstan head Chromium plated scwed down with or without letter Hot or Cold with long shank and fly nuts scrwed for iron pipe and fixed as specified and directed. |
| 28 | S&F PVC connection 15mm bore length not less than 300 mm long with both ends PTMT nuts complete all as specified. |
| 29 | S&F in repair 15mm bore angle stop valve of PTMT any colour high prssure screwed for iron pipe and fixed all as specified (minimum wt. 90gms). |
| 30 | Taking down old 110/75 mm bore PVC(SWR) pipes in any position .complete all as specified and directed. |
| 31 | S&F in repair 75 mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement complete all as specified and directed. |
| 32 | S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches or all as specified and directed. |
| 33 | S&F 75 mm bore.PVC(SWR) junction single (single T) equal or unequal with access door.complete all as specified and directed. |
| 34 | S&F 75 mm bore. PVC (SWR) bends complete all as specified and directed. |
| 35 | S&F 110mm bore.PVC(SWR) junction single (single T) equal or unequal with access door.complete all as specified and directed. |
| 36 | S&F 110 mm dia PVC (SWR) vent cowl. .complete all as specified and directed. |
| 37 | S&F 110 mm PVC (SWR) bend any radius.complete all as specified and directed. |
| 38 | S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall.complete all as specified and directed. |
| 39 | Supply and fix 32mm/40mm dia waste pipe for wash hand basin/urinals complte all as specified and directed |
| 40 | S&F in repair Jet spray chromium plated with 1mtr heavy PVC hose with chromium plated nuts complete all as specified and directed. |
| 41 | S & F in Repair 10 ltrs capasity PVC valveless syphonic action type flushing cistern low level white , with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and as directed. |
| 42 | S&F in repairs Vitreous China bowl urinal flat back, size of 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed. |
| 43 | M&L for 300x300x25 mm thick rubber moulded coloured chequered cement concrete coloured tiles set & jointed in neat cement slurry and pointed with cement & pigment to match the shade of tiles in floors over and incl 15 mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 44 | M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in foot parth/parks/lawns or light traffic parking etc., made by table vibratory method using PU mould, laid in required colour & pattern over and incl 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete including dismantling of old paver block all as specified and directed. |
| 45 | M&L applying 2 coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation over 10 cm width and girth complete |
| 46 | M&L applying one coats of synthetic enamel paints on old steel surfaces including surface preparation over 10 cm width and girth complete all as specified and directed. |
| 47 | Dismantling posts or struts (wood, steel or RCC) any section including taking out embedded portion and making good disturbed ground post embedded in concrete , brick work, masonry etc complete. |
| 48 | Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out , returning , filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm , watering and removing surplus soil to a distance n exc 50m and making good sufrace in soft/loose soil. |
| 49 | M & L for plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation/mass concrete/sub base complete all as specified. |
| 50 | S & F post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc , flat iron fillets (for securing wire mesh etc) including all necessary drilling , bolting and riveting etc and similar work conforming to Fe 4410-O or Fe 130-O. |
| 51 | S & F mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 30 cm long and dia meter of neck in mm n exc. 12mm complete all as specified and as directed. |
| 52 | S & F of chain link fencing including line wires 3.00 mm dia and 100 x 100 mm mesh size and type of 4.00 mm dia GI wire of standards , rails , straining bolts etc including provision of binding wire complete all as specified and as directed.. |
| 53 | M&L for 10mm dia and over mild steel TMT bars, cut to length , bent to shape required including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete. |
| 54 | S&F as in repairs Galvanised 2 strand , steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rail straining bolts including securing or tying at crossings with and provisons of galvanised mild steel wire, staples or steel pins etc as directed (Each line wire to be measured). |
| 55 | Dismantling structural steel work including doors, gates but excluding framed truss etc. |
| 56 | S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering , running rails and guides) and hanging also fastening and fixing complete of Fe 410 W (Gde E-250) quality 'B'. |
| 57 | Supply, laying and testing of 163 mm inner diameter of double wall corrugated (DWC) high density polethelene pipes (HDPE) and stiffness class-8 (SN-8) with ISI marked (with CML No) with and including all fittings & jointing materials for sewage line and laid in trenches as specified in IS-16098(Part-2):2013 and as per manufacturer's instruction complete all as specified and as directed. Note:- Bedding of pipe shall not be provided in normal condition and construction methods shall be strictly compiled as per clause no A-4 Annex 'A' of IS 16098(Part-2):2013 |
| 58 | S&F factory made SFRC MH cover with frame confirming to IS 12592:2002 HD 20 grade, of size 750mm circular or 750 x 750 mm rectangular sorrounded with steel strip 50 x 1.5 mm reinforced shall be as per relevant IS and laid over man hole brick work or concrete in CM 1:4, including reinforcement, complete all as specified and as directed by Engr-in-Charge. Notes: - (i) Contractor shall provide PV alongwith manufacturer test certificate of SFRC cover. (ii) Reinforcement shall not be measured and paid seperately |
| 59 | Excavating in trenches , n.exc 1.5 mtr wide or 10 Sqm on plan and n.exc 1.5 m in depth for foundation etc or for shafts, manholes etc and getting out in soft/loose soil complete all as specified. |
| 60 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm of soil complete all as specified and as directed. |
| 61 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point of soil complete all as specified and directed. |
| 62 | Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 63 | M&L for granite (z black or as approved) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing types over 15mm thick screed bed in CM 1:4 complete all as specified and directed. Please Enable Macros to View BoQ information |