|
| 1 | Dual View X-Ray Baggage Scanner |
| 2 | Supply, Installation, testing and commissioning of Dual view X-ray Baggage scanner complete in all respect as required with the following specifications: |
| 3 | GENERAL SPECIFICATIONS |
| 4 | Tunnel Size 600mm W(width) X 400mm H (Height) |
| 5 | Conveyor belt speed Between 0.18 and 0.26 per second bidirectional |
| 6 | Power Supply230V AC, 50Hz and should be able to withstand voltage fluctuations in the range of 170V to 250V. single phase 3 to 5 Amp. |
| 7 | Conveyor Capacity 160 KG or more |
| 8 | Conveyor Throughput 200 bags per hour or better |
| 9 | Sensors >1000 diodes, L shaped detector(Folded array type), In case of defective diode arrays scanning should be disable and error message should be displayed on the screen. |
| 10 | X-Ray Voltage 160 kV as required. |
| 11 | X-Ray source/generator Dual generator, Should be capable to operate smoothly for a period of at least six years. |
| 12 | Duty cycle 100% |
| 13 | Radiation level The radiation level should not exceed accepted health standard (0.1m R/Hr at a distance of 5 cm form external housing). (Relevant certificate from AERB.) |
| 14 | Operating Temperature The operating temperature should be 0 degree Celsius to 50 degree Celsius. NABL accredited lab report to be provided with the bid |
| 15 | Resolution The machine should be able to display single un-insulated tinned copper wire of 42 SWG or 38 AWG |
| 16 | Penetration Penetration should be 30 mm thickness of steel or better |
| 17 | Video Display 18.5” or better 2nos. Of LCD/LED monitor SVGA high resolution, low radiation, flicker free, resolution at least 1280 X1024, 24 bit colour real image processing. |
| 18 | Multi energy X ray imaging ;-The machine should have feature of Multi energy X ray imaging facility where materials of different atomic number will be displayed in different colours to distinguish between organic and in organic materials. With this method to distinguish high density organic materials including explosives. Machine should have variable colour or materials stripping to facilitate the operator to monitor images of organic materials for closer security. All suspicious items- (Explosives, high density, material narcotics) should be displayed in one mode and that should be on line. |
| 19 | Radiation Safety :- the machine must comply with requirements of health and safety regulations with regard to mechanical electrical and radiation hazards. Before installation of the machine, the supplier/manufacturers should furnish relevant certificates from atomic energy regulatory board of India regarding radiation safety. The company manufacturing the equipment should have ISO certification for manufacturing and servicing of X-Ray screening machines.with valid certification |
| 20 | Film Safety :-Guaranteed safety for high-speed up to ISO 1600. The machines should be film safe. In other words photographic films must not be damaged due to X Ray examination. NABL/ILAC accredited lab report to be provided with the bid. |
| 21 | Machine should be proper sealed from all the sides for pest proof. Dust proof cover is to be provided for covering when system is not in use. |
| 22 | Facility for variable contrast must be incorporated to allow enhancement lighter and darker portion of the image |
| 23 | The machine should be so designed that software enhancement (Free of Cost ) can be easily implemented to take care of new technique in image processing and pattern recognition. Machine should have AI feature for detection of gun, knife, scissor |
| 24 | Full diagnostic built in the test facility. Machine should have software controlled diagnosis report facility and system should give printout if printer is connected. |
| 25 | All software features of machine should be online and password protected |
| 26 | BARC/BRIT film and food safety certificate to be provided with the bid by vander |
| 27 | Machine should be capable for recalling 15 or more previous images. It should have the capability of archiving 2000 or more images with date & time stamp |
| 28 | Control desk with security housing and locking provision should be available. The operator personal identification number can be entered the keyboard along with generation of log. |
| 29 | OEM should have relevent approval from AERB for the offered model |
| 30 | Facility of image enhancement should be available..All models should have online recording facility and image s can be recorded in CD, R/W or/and USB and should be able to view images so recorded on standard alone PC |
| 31 | Lead impregnated safety screens should be available at either ends of the tunnel. This should be covered by relevant AERB certificate. Idle rollers to be provided at either ends of the tunnel to facilitate placing of baggage at input and output. Type approval of the model of the X ray baggage scanner to be provided with the bid. |
| 32 | All software features should be controlled from keyboard and mouse of machine keyboard function should be user friendly. To enable/disable the software features system should not be rebooted. Operation system to be Linux based |
| 33 | If the machine fails to penetrate a particular item than an alarm video and audio both should be generated to notify the operator. |
| 34 | Equipment should comply with AAI, BIS codes/standereds / Ministry of civil eviation / guide lines |
| 35 | CE, FCC, Rohs, CMMI Level 3 certificate to be provided with the bid |
| 36 | The threat image projection (TIP) system software to be incorporated in all X-ray BIS |
| 37 | Copy of all software including X-ray software with recovery CD must be provided. |
| 38 | Other Features |
| 39 | Edge & Variable edge enhancement Inverse Image Setup time not more than 10 minutes Pseudo colour Date and time display. |
| 40 | Minimum computer configuration |
| 41 | a CPU: should be able to deliver the output to meet the specification mentioned as aboveb Hard Disk: 500 GB 7200 rpm serial ATA HDD or betterc Operating system Linux/Windows basedd Ports: 6 USB ports (with at least 2 in Front), 1 serial port, 1 parallel port 1 PS/2 keyboard and 1 PS/2 Mouse port, audio ports for microphone and headphone in fronte CD-R/RW Drive: DVD writerf Networking facility 10/100/1000 on board integrated network port with remote booting facility remote system installation, remote wake up, out of band management using any standard management software. |
| 42 | Threat Image projection |
| 43 | Tip software facility shall be incorporated in the offered X-ray machine to assist supervisors in testing the operator alertness and training X-ray screeners to improve their abnity in identifying specific threat object. The system will create a threat object and the same will be superimposed on the monitor screen while a bag is being screened. To acknowledge that the operator has seen the false object, operator must press the control panel key that will cause the computer generated threat object to disappear from x-rayed bag image on the VDU screen. Each operators action shall be recorded in the hard disc of the computer for the audlting purpose by the supervisor or otherauthorized erson |
| 44 | Design of the system |
| 45 | Tip software should be compatible with other X-ray technologies such as automatic reject unit. Dual X-ray screen |
| 46 | technologies, automatic treat recognition system etc. |
| 47 | All x-ray image functions must be available at the same time along with TIP |
| 48 | IMAGE LIBRARY |
| 49 | The image library should have an image library containing at least 100 explosives devices, 100 knives and 100 firearms in various sizes, shapes, locations and orientations. However, the system have facility to expand the library to incorporate additional images by user without assistance of the manufacture |
| 50 | The image library should contain images of threats at different orientations both plan and end on orientation should be used. Although these will be assigned different file names and references, it must be possible to cross-reference these as the same threat. All threat image projection images must be realistic, representative and non- distinguishable from real threat items. |
| 51 | Programming facility shall be available to project threat images in different intervals. The same period of threat image as well as image mx in percentage shall be user programmable e.g. software shall select 40% images of explosive devices, 35% of the arms & 25% knives or random etc. |
| 52 | Once the screener has responded to identify the computer generated threat image, it should remain on the screen for a predefined user programmatic feedback message shall be visible to the screener. |
| 53 | The threat image projection facility shall have details of user data-base such as department name, screener name , organization, user ID Number, level of access such screener, administrator, maintenance & password |
| 54 | Access to start up menu should be restricted only to the authorized individuals. A log in procedure by means of password or security key could achieve restricted access to each of the comment. The log in procedure should not take longer than 20 seconds. The system should have facility to bypass the TIP facility, if programmed so by the system administrator. It is to be ensured that the TIP software shall not be hindrance to normal functioning of X-ray machines |
| 55 | When the operator logs-in or logs out message should be displayed on x ray BIS VDU screen to confirm that he/she has been correctly logged in or logged out. |
| 56 | The threat image projection should be capable of giving feedback “HIT MISS or FALSE ALARM” message. No message will be presented if a screener correctly passed as clear bag. |
| 57 | A HIT message to be presented when a screener has correctly identified a Threat image projection image. A MISS message shall be presented when screener fails to identify the TIP image. A FALSE ALARM message shall be given when screener incorrectly indicate TIP image when in fact no threat image projection is present. The feedback should clearly indicate in a screen that a tip object has been correctly identified /tip object has been missed/ that a TIP object has been missed/ no TIP object was present. Information should be recorded in the database. |
| 58 | Different colour coding shall be used for feedback to the screener. It is recommended that colour code “RED for MISS” GREEN for “HIT” and YELLOW to false alarm or interrupt be used |
| 59 | The system shall automatically prepare the daily log of events for each screener performance. TIP log shall include particulars of name of screener, time & date image, weather threat image was successfully identified or missed etc. |
| 60 | The report on threat image projection system may have date and time (from-to) as per requirement. Screener particulars and decision/outcome i.e. MISS, HIT or FALSE Alarm in percentage as well in absolute numbers, numbers of bag screened, categories such as explosives devices knife or weapons etc. |
| 61 | All data should be stored on the system for a minimum of two months after it has been downloaded. No individual, regardless of access rights to the threat image projection components would delete or amend any of threat image projection data or time i.e. threat image projection data on the actual x ray machine will be read only file. |
| 62 | The X-Ray beam divergence should be such that the complete image at maximum size of bag is displayed without corner cuts.Make: Astrophysics/Smith Detection/Vehant/Leidos |
| 63 | Spare part should be readily available |
| 64 | 15 days training of Police Personal before handing over |
| 65 | Maximum restoration time after break down should be 24 hours |
| 66 | Supply, Installation, Testing and Commissioning of 3 KVA Online UPS with 1 phase AC input and 1 phase AC output with 30minutes backup on full load with 12VSMF batteries bank with Rack. The UPS should be with IGBT based inverter and IGBT based rectifier and with LCD and LED display for monitoring of it’s status along with same OEM make inbuilt Galvanic isolation transformer at input side. Complete in all respect to the entire satisfaction of Engineer in Charge .Make: Numeric/Uniline/Emerson/APC/ABB |
| 67 | Supply, installation, testing and commissioning of Queue manager for manage the entry of public. The job includes all labour and petty material required to tomplete the job to the entire satisfaction of EIC. Make: Reputed. |
| 68 | Supply, Installation, Testing and Commissioning of Door frame metal detectors The Door Frame Metal Detectors should provide convenience with affordability. Equipped with optional casters, Multi Zone Metal Detector Gate can be moved quickly in case of shifting to other location. It can be operated on battery power. Metal location is reliably displayed at each zone. If metal is present in more than one zone, all zones with metals are displayed on the Zone Representation provided on the side panel with below mentioned specifications: - |
| 69 | • Multi Pinpoint zones minimum 9 or above to precisely identify locations from head to toe |
| 70 | Auto Set, Microprocessor Based. |
| 71 | High Performance Multi-Zone Detection.Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed heavy class PVC conduit having wall thickness 2.0mm as required |
| 72 | Adjustable Operational Frequency |
| 73 | Independent sensitivity setting of each zone. |
| 74 | Security Level 0-200. |
| 75 | Digitally controlled sensitivity, threshold and volume. |
| 76 | Sensitivity settable in steps from 0-99 or better. |
| 77 | Automatically count passengers and alarm up to 99999. |
| 78 | Auto Calibration |
| 79 | Keypad for Program setting |
| 80 | Detect all type of Metals.(should detects metal as small as 25 mm). |
| 81 | Audio / Visual indications for metal detection. |
| 82 | Counter i.e. IN, OUT, total IN and OUT. |
| 83 | Easy to mount/ assemble |
| 84 | Power: AC 90V~240V 50/60Hz. |
| 85 | Humidity: 95% non-condensing |
| 86 | Workplace Environment: - 10ºC to 65ºC |
| 87 | IP Rating: IP 55. |
| 88 | Detection: Detects all Metals, Zinc & Metal Alloys, ferrous/non-ferrous metals using single detection program. |
| 89 | Zone of detection on the symbolic body presentation on the control panel. |
| 90 | electromagnetic Standards on HumanExposure . |
| 91 | Digitally controlled sensitivity, threshold, & volume. |
| 92 | • Certification and Safety: Cardiac Pacemaker, magnetic media, pregnant woman Safe.Make: Sivananda, Garrett, CEIA. |
| 93 | Supply, Installation, Testing and Commissioning of Hand-Held Metal Detector light weight to detect hidden metal objects having below mentioned specifications: |
| 94 | Sensitivity: 0.1 gram of metal from 20-25 mm distance. |
| 95 | Battery:1X9 Volt re-chargeable/Dry/Alkaline battery. |
| 96 | Temperature: 0–50-degree C. |
| 97 | Humidity: 90% Rh |
| 98 | Ultra-low power consumption. |
| 99 | Operates on single 9 volt battery. |
| 100 | Auto Set, does not required adjustment. |
| 101 | Power on, metal detection and batter charging indication. |
| 102 | Make: Sivananda, Garrett, CEIA. |
| 103 | After Free/under warranty annual repair and maintenance for 1st Year and 2nd Year (Nil against warrenty |
| 104 | Maintenance Charges for 3rd Year @ 5% on capital cost |
| 105 | Maintenance Charges for 4th Year @ 5% on capital cost |
| 106 | Maintenance Charges for 5th Year @ 5% on capital cost Please Enable Macros to View BoQ information |