|
| 1 | Taking out LT XLPE/PVC insulated armoured cable alongwith all joints of any size from trenches wall/roof including taking out of brick layer and sand from trenches complete all as specified and as directed by EIC. |
| 2 | Excavation in trenches by mechnical means (hydraulic excavator) not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all kind of soil complete all as specified and as directed by EIC.. |
| 3 | M&L for Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soft/loose soil. complete all as specified and as directed EIC. |
| 4 | Removing excavated material/soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and as directed EIC. |
| 5 | Supply and fixing Double wall Corrugated High Density Polymer Ethylene (HDPE) pipe of 50 mm sizes as per IS 14930 (Part-2):2001, Laid in trenches/floors and fixed on walls/poles, with and including neccessary fittings such as bends, sockets and other connected accessories etc., for laying of electric cables, complete all as specified and as directed by EIC. |
| 6 | All as above item No 5 but size of HDPE pipe size 90 mm diameter |
| 7 | Supply, laying and testing LT XLPE insuated PVC bedded galvanised steel strip or wire armoured earthed electric power cable with aluminium conductor 1100 volts grade, heavy duty in trenches/along pole or wall of size 16 Sq mm 2 core complete all as specified and as directed by EIC. Note:- 1. Excavation and earth work, pipes, clamps, and cable joint shall be measured and paid separetely under respective items :- |
| 8 | All as per item No 7 above but of size 16 Sq mm 4 core |
| 9 | All as per item No 7 above but of size 25 Sq mm 4 core |
| 10 | All as per item No 7 above but of size 35 Sq mm 3.5 core |
| 11 | All as per item No 7 above but of size 50 Sq mm 3.5 core |
| 12 | All as per item No 7 above but of size 70 Sq mm 3.5 core |
| 13 | All as per item No 7 above but of size 95 Sq mm 3.5 core |
| 14 | All as per item No 7 above but of size 120 Sq mm 3.5 core |
| 15 | All as per item No 7 above but of size 185 Sq mm 3.5 core |
| 16 | Supply & laying in repair 80mm bore galvanized steel tubing \\"light grade\\" with all fittings in trenches/ under roads/ along pole/ wall for cable protection all as specified & as directed by EIC. . |
| 17 | Road cutting for UG cable under road/railway crossing, pavement, hardstanding by mannually means, protection GI pipe for cable of required dai and making it good to match with the adjoining surface/structure for after cable passing complete all as specified and directed by EIC. Note : GI pipe and PCC will be measured and paid against respective items. |
| 18 | M&L for tesitng of faulty LT XLPE/PVC armoured cable of any size and any position at CAD Pulgaon by using LT voltage testing kit installed on movable vehicle complete all as specified and directed by EIC.Note : This job includes cost of vehicle transport from Nagpur to Pulgaon and back |
| 19 | Supply & Fixing in repair 6 -16 Sqmm 4 Core cable jointing kit for 1.1 KV grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 and 4 core XLPE armoured aluminium conductor cable complete all as specified and directed by Engr-in-Chrage..Make 3M-Seal/Birla/Denson Note : Excavation, returning filling and removel shall be measured and paid separatly under relevant item of this BOQ |
| 20 | All as per item No 19 above but of size 70 to 120 sq mm 3.5 core |
| 21 | All as per item No 19 above but of size 150 to 185 sq mm 3.5 core |
| 22 | All as per item No 19 above but of size 240 to 300 sq mm 3.5 core |
| 23 | Dismantling and taking out the existing unserviceable (damaged/broken) Panel of any type and any size, from Location and removal from site all as directed by Engr-in-Chrage. |
| 24 | PCC (1:2:4) type C-1 using 20 mm graded stone aggregate as in coping/plinth block including necessary form work all as speciifed and directed by Engr-in-Chrage. |
| 25 | PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in coping/plinth block including necessary form work all as speciifed and directed by Engr-in-Chrage. |
| 26 | Material and Labour for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation of pole upto ground level complete all as speciifed and directed by Engr-in-Chrage. |
| 27 | Material and Labour for Hardcore of gauge n exc. 43 mm, deposited, spread and levelled in layers complete all as speciifed and directed by Engr-in-Chrage. |
| 28 | Supply, installation, testing and commissioning of a Portable/Vehicle mounted PulseReceiver (Pinpointer) 20x4 LCD DISPLAY With noise cancelling option,Accessories all as specified and directed by EIC.Make : HTM Progress Energy, Megger, Trimble/Metrotech, Scope T&M, Artek |
| 29 | Supply, installation, testing and commissioning of a Portable/Vehicle mounted HV TESTER 50kvDC/5mA SET Inbuilt auto discharge and totally earth protecte safety interlock, in built discharge,Timer,Zero Indiactor, Earth protection, Accessories :MAINS CORD, HV CABLE 25mtr all as specified and directed by EIC.Make : HTM Progress Energy, Megger, Trimble/Metrotech, Scope T&M, Artek, Metravi |
| 30 | Supply, installation, testing and commissioning of a Vehicle-mounted Cable, Drum, Machine, Foundation, switchboard and wiring digital meter, tube light etc all as specified and directed by EIC Please Enable Macros to View BoQ information |
| 31 | Supply, installation, testing and commissioning of a Vehicle-mounted Cable, Drum, Machine, Foundation, switchboard and wiring digital meter, tube light etc all as specified and directed by EIC Please Enable Macros to View BoQ information |