|
| 1 | Excavation in trenches, n. exc 1.5m wide and n.exc 1.5m deep for foundation of pole/ laying of under ground cable etc. or for shafts, wells, cesspits, manholes etc n. exc 10 sqm on plan and n exc 1.5 m depth and getting out in any type of soil. |
| 2 | Returning filling including spreading levelling watering and well ramming in layers n.exc 25cm in soil. |
| 3 | Removing excavated soil not exc 50m and depositing where directed at a level not exc 1.50m above the starting point. |
| 4 | M&L for PCC 1:4:8, type D-2 using 40mm graded aggregates as in foundation filling and mass concrete. |
| 5 | Brick work with sub class `B' bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:4. |
| 6 | M&L for moorum/red bajari filling in floors or pavings laid in layers n exc 15cm thick spread levelled and rammed incl watering |
| 7 | M&L for hardcore of broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface |
| 8 | M&L for 75 mm thick PCC 1:4:8, type D-2 using 40 mm graded stone aggregates as in sub bases of floors and pavings etc finishing cement concrete surface even and smooth without using extra cement. |
| 9 | M & L for non skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed for laying floor finishes in CM (1:6) complete all as specified and as directed |
| 10 | M & L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick rendering in CM (1:4) complete all as specified and as directed |
| 11 | M&L for RCC M-20 (Nominal Mix), using 20mm graded aggregates as in foundation filling and mass concrete. |
| 12 | S&F framed brackets of angles or Channels with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates,rivetting, etc., n exc 10 kg each brackets, conforming to Fe- 290 or Fe-165. |
| 13 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement |
| 14 | M & L Sand covering /cushioning for under ground cable protection complete all as specified and as directed. |
| 15 | Supply and lay in trenches brick, common burnt in clay, building brick, sub class 'B' designation 75 for cable protection all as specified and directed by the Engr-in-Charge. |
| 16 | S & F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 6 sqmm 4 core. |
| 17 | Supply & Fixing of outer feeder LT Panel board made of 3.15 mm sheet and size 700 X 550 X 350 mm powder coated paint with 63 A TPN MCB incommer, digital time switch, 40A TP contactor 1 No. for the automatic switching of luminaries, as directed. (Note:LT Panel board shall be CPRI Approved as listed in Tendet Documents) |
| 18 | M&L for earthing with galvanised earth plate electrode 600 x 600 x 6 mm burried directly in ground vertically to a depth of not less than 2.25 mtr below ground level connected to galvanised iron strip 25x4 mm dia by means of nut, bolts and washers made out of galvanised iron mild steel and 50 mm dia GI pipe \\"light grade\\" for protection of earth lead and connected to control board or transformer neutral earth or as directed by Engr -in-Charge including earthing pit in PCC (1:3:6) type C1 pre-cast cover PCC cover lab of size 300 x 300 x 100 mm with one handle made out of 8 mm dia round bar 20 mm dia GI pipe light grade for watering funnels , wire mesh and provided charcoal or coke of alternative layers of 15 cm including necessary earth work complete shown in electrical plated No 3 and testing complete. NOTE : (i) The earthing pit should be provided with proper earth pit and pit cover. Pit cover should be painted with synthetic enamel paint of approved colour and pit number to be marked on a GI plate above 45 cm from GL as per colour code followed in AF Station.(ii) Iron strip 25x4 mm dia upto 7.5 mtr length shall be deemed to include in this items rate. |
| 19 | Supply and fixing LED flood light 150 watt 230 V AC outdoor type with thermal management in multiple optics lumen output not less tha 140 lumen/watt and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp including MS angle & foundation Please Enable Macros to View BoQ information |
