|
| 1 | M&L for preparation of plastered or un plastered old decorated surfaces of walls by Vacuum based sanding machine all as specified, removal of nails etc & filling cracks/hole by applying wall care putty (multi purpose mixer shall be used for uniform and proper mixing of putty) and applying one coat of white wash by auto roller & leaving premises clean and tidy, complete all as specified & directed by Engineer-in-Charge. |
| 2 | All as per item No 1 above but one coat of white wash on ceilings by auto roller complete all as specified & directed by Engineer-in-Charge. |
| 3 | All as per item No 1 above but one coat of oil bound distemper on walls by auto roller complete all as specified & directed by Engineer-in-Charge. |
| 4 | All as per item No 1 above but one coat of oil bound distemper on Ceilling by auto roller complete all as specified & directed by Engineer-in-Charge. |
| 5 | All as per item No 1 above but one coat of cement paint on walls by auto roller complete all as specified & directed by Engineer-in-Charge. |
| 6 | M&L for preparation of old painted wooden surface of any descrption , position and location not otherwise described over 10 cms width or girth and applying one coat of synthetic enamel paint (ordinaryr tint) Complete all as specified and directed |
| 7 | All as pe item No 06 above but applying one coat of synthetic enamel paint (ordinary lint) on steel surfaces Complete all as specified and directed |
| 8 | M&L for complete removal of existing treatment from old decorated plastered surfaces of walls by Vacuum based sanding machine complete all as specified, removal of nails etc & filling cracks/hole with putty, (multi purpose mixer shall be used for uniform and proper mixing of putty) and applying two coats oil emulsion distemper white or coloured over a coat of approved primer by auto roller complete all as specified & directed by Engineer-in-Charge. |
| 9 | M&L for 2mm thick birla with putty complete all as specified and directed. |
| 10 | S&F in repair 18mm thick HDHMR BOARD exterior grade including any coloured prelaminated sheet of required thickness over HDHMR board, anti fungal, moisture resistance, anti borer as per IS 14587 for frame and shutter for kitchen cabinets/cupboards etc all as per specified and directed by Engr-in-charge. Note: sample as approved by GE. Make: Action Tessa/Greenply/Century. |
| 11 | S&F in repair 18mm thick HDHMR BOARD exterior grade including white coloured prelaminated sheet of required thickness over HDHMR board, anti fungal, moisture resistance, anti borer as per IS 14587 for frame and shutter for kitchen cabinets/cupboards etc all as per specified and directed by Engr-in-charge. Note: sample as approved by GE. Make: Action Tessa/Greenply/Century. |
| 12 | S&F in repair partial overlay/fully overlay hydraulic self closing concealed hinges having size 103mmx64mm finish of nickel/silver all as specified and directed. |
| 13 | S&F in repair stainless steel cabinet/drawers handle having a length of 75mm and shape all as specified and directed. |
| 14 | S&F in repair stainless steel cabinet/drawers handle having a length of 485mm and shape all as specified and directed. |
| 15 | S&F in repairs SS 304 Cup & Saucer basket of size 520x485x100mm corrosion resistance telescopic drawer channel all as specified and directed. Make: cat part no 6159 of Godrej or other equivalent as approved by GE. |
| 16 | S&F in repairs SS 304 Perforated cutlery basket of size 520 485x100mm corrosion resistance telescopic drawer channel all as specified and directed. Make: cat part no 6134 of Godrej or other equivalent as approved by GE. |
| 17 | S&F in repairs SS 304 Three shelf pull out of size 200x485x530mm corrosion resistance telescopic drawer channel all as specified and directed. Make: cat part no 6144 of Godrej or other equivalent as approved by GE. |
| 18 | S&F in repairs SS 304 Grain trolly of size 525x485x350mm corrosion resistance telescopic drawer channel all as specified and directed. Make: cat part no 6175 of Godrej or other equivalent as approved by GE. |
| 19 | S&F in repairsThali Plate basket SS 304- 520x485x150mm all as specified and directed. Make: cat part no 6139 of Godrej or other equivalent as approved by GE. |
| 20 | S&F in repairs Plain Basket SS of Size 520x485x200mm corrosion resistance all as specified and directed. Make: cat part no 6128 of Godrej or other equivalent as approved by GE. |
| 21 | S&F in repairs anti rusting stainless unik cloth drying hanger made of 16mm dia hollow stainless rod , 8 feetx6 rods set for heavy duty including fixing on ceiling with metal roof clamps all as specified and directed and approved by GE. |
| 22 | S&F in repairs Ball Bearing drawer channel 500mm of size all as specified and directed and approved by GE. |
| 23 | Demolition of stone slabs and tiles of any description or thickness in floors & wall, laid bedded & pointed in any mortar. |
| 24 | M&L for non skid coloured ceramic tile 7 to 8mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match including 15mm thick screed bed or bedding layer of mortar for laying floor finishes with CM 1:6. |
| 25 | M&L for non skid coloured ceramic tile 7 to 8mm thick area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match including 15mm thick screed bed or bedding layer of mortar for laying floor finishes with CM 1:6. |
| 26 | M&L for non skid coloured ceramic tile 7 to 8mm thick area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering for backing coat on vertical surface of wall or concrete surfaces in CM 1:4 to receive wall tiles. |
| 27 | M&L for coloured (of any shade) vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile n.exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick for laying floor fiishes with CM 1:6 complete. |
| 28 | M&L for coloured (of any shade) vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile n.exceeding 0.36 sqm, in skirting/dado/risers etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering for backing coat on vertical surface of wall or concrete surfaces in CM 1:4 to receive wall tiles. |
| 29 | M&L for Glazed ceramic coloured walls tiles in vertical surfaces 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering for backing coat on vertical surface of wall or concrete surfaces in CM 1:4 to receive wall tiles. |
| 30 | M&L for machine cut kota stone slab flooring 20-25mm thick over and including cement screed base 15 mm thick in cement morter1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. |
| 31 | M&L for machine cut kota stone slab 20 - 25mm thick in skirting, riser etc set in vertical surface of wall or concrete surfaces over and including10mm backing coat in CM 1:4 to receive wall tiles complete. |
| 32 | M&L for Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble to match over and including screed bed or bedding layer of mortar including 15mm thick for laying floor finishes with CM 1:6. |
| 33 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge. |
| 34 | S & F 15mm bore high density UPVC pipe of pressure rating 6kgf/sqcm with all fittings and fixed complete to walls and ceilings or laid in floors all as directed. |
| 35 | S & F 16mm bore high density CPVC CPVC pipes SDR 11 & PlainCPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specifie all as directed. |
| 36 | Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge. |
| 37 | S & F 25mm bore high density UPVC pipe of pressure rating 6kgf/sqcm with all fittings and fixed complete to walls and ceilings or laid in floors all as directed. |
| 38 | Taking up or down 50mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge. |
| 39 | S & F 50mm bore high density UPVC pipe of pressure rating 6kgf/sqcm with all fittings and fixed complete to walls and ceilings or laid in floors all as directed. |
| 40 | M&L in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement concrete type B1, 1:2:4 for 75mm bore all as directed by Engr-in-Charge. |
| 41 | S&F in repair 600mm x 450mm beveled edge mirror 5 mm thick of selected quality glass mounted on 6 mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers with aluminium beading all as directed by Engr-in-Charge. |
| 42 | S & F in repairs plastic seat cover white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device all as directed by Engr-in-Charge. |
| 43 | S & F in repairs Vitreous China wash down water closet pan pedestal pattern (Europian type) (excluding flushing cistern and flush pipe) plastic seat black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device all as directed by Engr-in-Charge. |
| 44 | S&F in repairs Vitreous China wash down water closet (Squat pattern ) white complete as fixed in repair excluding flushing cisternand flush type \\"Orrisa\\" pattern size 580x440 with integral footrest inject connection to trap antisyphonage etc complete including joint between flushing pipe and socket of WC all as directed by Engr-in-Charge. |
| 45 | S & F in repairs PVC valvless syphonic action flushing cistern low level white of 10ltrs capacity with inlet ball valve float and handle including bracket all as directed by Engr-in-Charge. |
| 46 | S&F in repairs health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.(Make: Hindware,Jaquar,Cera) |
| 47 | S&F in repairs PVC connection 600mm long of dia 15mm complete. |
| 48 | S&F in repair Vitreous China wash hand basin, angle back 550 x 400mm white excluding taps, waste chains and plugs and porcilain stopper but including CI bracket and nut bolts as per maufacturers instructions. |
| 49 | S&F in repairs 32mm dia flexible waste pipe for urinal, wash basin and kitchen sink for length exc. 1m not exc 2m complete. |
| 50 | S&F in repair PTMT waste coupling of 32mm dia (half or full thread) including taking down old coupling of any description complete all as specified and directed. |
| 51 | S&F in repairs 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in waste/soil pipe complete all as specified and directed |
| 52 | S&F in repairs 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in waste/soil pipe complete all as specified and directed |
| 53 | S&F in repairs 110 mm dia PVC (SWR) bends of any radius with access door complete |
| 54 | S&F in repairs 75 mm dia PVC (SWR) bends of any radius with duck foot or heel rest fitted with oval access door complete. |
| 55 | S&F in repair sheet glass shelf with 5.5mm thick sheet glass shelf 12cm wide with chromium plated guard and railing 60cm long complete all as specified and directed. |
| 56 | S & F in repairs 25 mm dia stainless steel tubular curtain rod including brackets fancy type (design of socket shall be approved by GE/AGE at the time of execution) as directed |
| 57 | S&F in repairs including disconnecting tanks, 1000 ltrs rotational moulded double layred, polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. |
| 58 | S&F in repairs including dismantling tanks, 500 ltrs rotational moulded double layred, polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. |
| 59 | S&F disconnecting existing tanks exc 250 ltr but n exc 500 ltr, setting aside (or lowering if required)and refixing after petty repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. |
| 60 | S&F disconnecting existing tanks exc 500 ltr but n exc 1000 ltr, setting aside (or lowering if required) and refixing after petty repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.. |
| 61 | S&F in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 142 gms) complete all as specified and directed. Make : Prayag & equivalent. |
| 62 | All as per item No 61 here in before but 25mm dia complete all as specified and directed. Make : Prayag & equivalent. |
| 63 | S&F in repairs 15mm dia stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle for iron pipe.(Make: Hindware,Jaquar,Cera) |
| 64 | S&F in repairs, 15mm bore bib taps fancy type chromium plated cast copper alloy with capstan heads, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.(Make: Hindware,Jaquar,Cera) |
| 65 | S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capston heads, chromium plated fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.(Make: Hindware,Jaquar,Cera) |
| 66 | S&F in repairs sinks made of stainless steel 1 mm thick kitchen with plugs, washers and waste , including bedding in cement mortar on to dwarf wall or including fixing cantiliver brackets and connecting union to pipe, overall size 495mm x 420 mm & bowl size 410mmx330mm x 160mm complete. |
| 67 | S&F in repairs chromium plated shower rose with or without swivel joints any size, including fixing to GI pipe for 125mm dia complete all as specified & directed.(Make: Hindware,Jaquar,Cera) |
| 68 | S&F in repairs brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe 15mm bore and fixed complete.(Make: Hindware,Jaquar,Cera) |
| 69 | S&F in repairs brass CP wall mixer for mixing hot & cold water three way screwed down for iron pipe 15mm bore and fixed complete.(Make: Hindware,Jaquar,Cera) |
| 70 | S&F in repairs, towel rack 600mm Long with Lower Hangers, Stainless Steel complete all as specified and directed. (Make: Jaquar or equivalent) |
| 71 | S&F in repairs floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed. |
| 72 | Demolition of Brickwork or stone/boulder masonry, built in cement/cement lime mortar including all quoins, arches, pillars, ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling etc. all as specified and directed. |
| 73 | M&L for brickwork with sub class ‘B’ old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 |
| 74 | Taking down cement plaster on brick or stone walls / ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete |
| 75 | M & L for 10 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces and surface finished even and smooth without using extra cement all as directed. |
| 76 | M & L for rendering 5mm thick on brick wall surface or concrete surfaces of ceiling in cement mortar 1:3 for finished even and smooth (without using extra cement) |
| 77 | M&L for Rendering in two layer on fair faces of brick work or concrete surfaces of wall 5 mm thick in CM 1:4 mixed with WPC @ 3% by wt of cement for finished even and smooth without using extra cement over 10 mm thick rendering in cement mortar 1:6 smooth without using extra cement (WPC will be measured separately). |
| 78 | Supply only Integral water proofing compound |
| 79 | M&L for preparing new plastered surfaces of ceiling and applying three coats of white wash on ceiling. |
| 80 | M & L for preparing new plastered surfaces of wall and applying two coats of oil bound distamper over and including a coat of 2mm average thick birla/equivalent wall care putty and one coat of chalk whitening primer complete |
| 81 | S&F 150 mm extruded aluminum alloy handles, fabricated type anodized complete all as specified and directed. |
| 82 | S&F 300mm aluminum anodised sliding door bolts, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alluminium alloy complete all as specified and directed. |
| 83 | S & F 150 mm long aluminium anodised barrel tower bolt of extruded section and fixed, all as specified. |
| 84 | S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised staples complete all as specified and directed. |
| 85 | M & L for Hacking out old broken glass exc 1.5 sqm (any thickness, size, quality or description) from wooden/steel/aluminium frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads. |
| 86 | M & L for 4.0mm thick figured glass, n.exc 0.5 Sqm and glazing with rubber beading or with glazing clips, all as specified and directed. |
| 87 | M & L for 4 mm thick sheet glass, n.exc 0.5 Sqm each pane ordinary quality and glazing with rubber beading or with glazing clips, all as specified and directed. |
| 88 | S & F powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 89 | S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 90 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5sqm each and making good disturbed portion to match with existing |
| 91 | S&F for Framed work as in doors or gates or grill/grating of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specifed and directed. |
| 92 | S&F in repair 350x450mm size cabinet mirror rectangular shape with 4mm thick selected quality mirror and PTMT frame with openable door shutter with PTMT frame outside mirror as framed complete all as specified and directed. |
| 93 | Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc all as directed. |
| 94 | Taking down carefully UNSV main switch and DB's including MCBs of any size make, type and capacity and depositing at site as directed. |
| 95 | M & L for concealed point wiring complete with multistranded copper conductor (FRLS)1.5 Sqmm size PVC insulated unsheathed cable 1100 volt grade, conforming IS 694 & color code in conduit system of wiring, drawn in including PVC conduit not less than 20 mm dia concealed duly fixed with U-Clips, including cutting chases, finising of slote by means of cement mortor making good to the existing surface of the wall & touching with the existing colour of wall with three coats and making good disturbed surface complete, sunk in pressed steel terminal boxes of required size not less than 1.2 mm thick factory made and factory painted with top cover 3 mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core multistranded copper conductor 1.5 sqmm size solid PVC insulated unsheathed cable (FRLS) as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified and directed by Engr-in-Charge. |
| 96 | One light point controlled by one one/way switch. |
| 97 | One Fan point controlled by one one/way switch. |
| 98 | One 3 pin 5 Amps socket outlet on same board with other switch. |
| 99 | One 3 pin 5 Amps socket outlet on independent board. |
| 100 | One bell point controlled by one way switches |
| 101 | All as per item No. 95 above but using 2.5 Sqmm PVC insulated, unsheathed cable for one 3 pin socket outlet 15 Amps on independent board |
| 102 | M & L for sub main wiring using two single core 4 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawing in and including accessories like bends, tee, etc fix on wall and ceiling and connecting to earth dolly and including 4 Sqmm earth wire, PVC insulated & unsheathed all as directed.Note : (i) Two single core cable, one run of earth copper conductor and one run 20MM PVC Conduit will be measured and paid as one unit length. |
| 103 | S&F switch piano flush type single pole one way 5 Amp 240 Volts. |
| 104 | S&F switch socket combination 2 in 1, 3 pin, 5 Amps flush type 240 Volt. |
| 105 | S&F switch socket combination 3 pin 5 and 15 Amp 2 in one flush with inbuilt indicating lamp. |
| 106 | S & F Bell switch including Bell ding dong type, one way, 240 volts, AC, ISI marked. |
| 107 | S&F ceiling rose surface bakelite three terminal 65 x 50 mm three terminal 250/230 volts ISI marked. |
| 108 | S&F ceiling fan condenser paper type 2.5 MFD |
| 109 | S&F Modular switch 1 way 6A, 1module |
| 110 | S&F Modular Socket, 6A - 2/3 pin combined 2module, |
| 111 | S&F Modular Socket 6A/16A - 2/3 pin combined 2 module, |
| 112 | S&F Modular Bell push 6A 1 module |
| 113 | S&F Modular Fan step regulator, 120W - 2 module |
| 114 | S/F in repair sheet metal enclosure for MCB single pole and neutral 08 way 240 volts, 200 Amp rated bus bar. |
| 115 | S & F MCB SPN 32 Amps 10 KA rupturing capacity. Make Legrand/C&S/Havells |
| 116 | S&F MCB SP 6 to 25 Amps 240V, 10 KA 'B' curve Complete with connection testing and commissioning. |
| 117 | S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd. |
| 118 | S&F of 4' 20W LED Tube With Batten with system lumen output of 2400 lumens. System Efficacy should be > 120lm/ W. The Luminaire Should have Cool Daylight Color temp of (2000K to 6500K) as decided by Engr-in-Charge & CRI>80.Life 40K burning hrs with 70% lumen maintenace. PF>0.95 Surge Protecton of 3KV.All the Photometrical & Electrical parametrs must be supported by LM79-08 test report from NABL Accridiated LAB OR UL, R9 Value > 0. Lamp starting time is not more than 1 Sec. The LED batten light conforms to applicable IS all as directed by Engr-in-Charge. |
| 119 | S&F of 1' 5W LED Tube With Batten with system lumen output of 2400 lumens. System Efficacy should be > 120lm/ W. The Luminaire Should have Cool Daylight Color temp of (2000K to 6500K) as decided by Engr-in-Charge & CRI>80.Life 40K burning hrs with 70% lumen maintenace. PF>0.95 Surge Protecton of 3KV.All the Photometrical & Electrical parametrs must be supported by LM79-08 test report from NABL Accridiated LAB OR UL, R9 Value > 0. Lamp starting time is not more than 1 Sec. The LED batten light conforms to applicable IS all as directed by Engr-in-Charge. |
| 120 | S & F Lamp holder, PVC type with back plate suitable for batten fittings including LED lamp 9 Watt complete all as specified and directed. |
| 121 | Note :-(i) Item No 1 to 45 All items manufacture should be after Jul 2025.(ii) Contractor should be arrange necessary T&P for execute the work.(iii) All LED light warranty should be 2 Years after completion of the work. (iv) Switch and other connected items model should be decided by Engr-in-Charge. Please Enable Macros to View BoQ information |