|
| 1 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles & rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 2 | Material and labour for non skid ceramic tiles 7 to 8mm thick of area exceeding 0.06 Square Metre but not exceeding 0.11 Square Metre in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15mm thick in cement mortar 1:4 complete all as specified and directed. |
| 3 | Material and labour for non skid ceramic tiles 7 to 8mm thick of area exc 0.11 Square Metre but not exceeding 0.38 Square Metre in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15mm thick in cement mortar 1:4 complete all as specified and directed. |
| 4 | Material and Labour for double charge Vitrified ceramic tiles 9mm to 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in cement mortar 1 : 4 complete all as specified and directed by Engineer-in-Charge. |
| 5 | Material and labour for glazed ceramic tiles of size 300mm x 450mm x 7mm thick in vertical surfaces as in skirting, dados and risers of steps etc, set and jointed in neat cement slurry and pointed in coloured cement to match including and over 10 mm thick rendering in cement mortar 1:3 as backing coat on vertical surface complete all as specified and directed. |
| 6 | Material and Labour for double charge Vitrified ceramic tiles 9 to 10mm thick (square/rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in cement mortar 1 : 4, Complete all as specified and directed by Engineer-in-Charge. |
| 7 | Material and labour for double charge Vitrified ceramic tiles 9 to 10mm thick (square/rectangular), as in skirtings, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including rendering 10 mm thick in cement mortar 1 :3 as backing coat on vertical surface, Complete all as specified and as directed by Engineer-in-Charge.Note : Size of tile shall be all as directed by the Engr-in-charge. |
| 8 | Material and Labour for 40mm thick Cement concrete 1:2:4 type B-1,( using 20mm graded crushed stone aggregate) as in sub base of flooring, Complete all as specified and directed by Engineer-in-Charge. |
| 9 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and jointed in cement mortar or bedding, Complete all as specified and directed by Engineer-in-Charge. |
| 10 | Material and Labour for 20mm thick granite (of any type) work (Table rubbed and polished) in steps, floors, jambs, pillars, windows cills, cooking platform and laid over and including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed by Engineer-in-Charge. |
| 11 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform partitions and other similar situations, Complete all as specified and directed by Engineer-in-Charge. |
| 12 | Material and Labour for Machine cut cudappa stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, laid over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed by Engineer-in-Charge. |
| 13 | Material and Labour for 20mm thick Granite (of any type) tiles machine cut in skirting/dado laid over 10mm thick backing coat in CM 1:3, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type, Complete all as specified and directed by Engineer-in-Charge. |
| 14 | Demolition of cement concrete above ground floors exc 15 cm thickness as in sunken floors or in similar works, Complete all as specified and directed by Engineer-in-Charge. |
| 15 | Material and Labour for water proofing treatment of sunken floor by applying (a)15mm thick plaster in cement mortar 1:4 with WPC over (b) application of cement slurry mixed with and including acrylic based polymer modified cementitious composite compound coating in two layers as per direction of Engineer inCharge. (C) Over and above and including 200 micron thick polymer film should be pasted with the help of adhesive after treatment, Complete all as specified and directed by Engineer-in-Charge.Note: (i) make -Dr Fixit, Asian paints ,Fosroc and M/S Sikka (ii) The work shall be executed only through authorised applicator of manufacturer |
| 16 | Material and Labour for Cement concrete in foundations, filling and mass-concrete 1:5:10 Type E2 (Using 40mm Graded crushed stone agrregate) as in sunken floors, Complete all as specified and directed by Engineer-in-Charge. |
| 17 | Material and Labour for disconnecting existing PVC water tanks, setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt etc from tanks and from mouthts of circulating pipes etc and hoisting if required reconnecting and refixing in position capacity exceeding 250 ltrs and n exc 500 ltrs, Complete all as specified and directed by Engineer-in-Charge. |
| 18 | All as per Item No 17 here in before but of 1000 litrs capacity Complete all as specified and as directed |
| 19 | Supply and Fix in repairs 500 litres capacity rotational moulded polythelene water storage tanks ISI marked (Cylindrical vertical with closed top) triple layered hoisted and fixed in position including dismantling of existing unserviceable PVC tanks all as specified in SSR Part I complete all as specified and directed. |
| 20 | All as per item No 19 above but 1000 litres capacity. |
| 21 | Cleaning and removing all scale and dirt etc from water tanks and from mouths of circulating pipe exc 500 and n.exc 1000 litres capacity tank including writing date of cleaning with paint on tank complete all as specified and directed. |
| 22 | All as item No 21 above but exc 250 and n.exc 500 ltr capacity complete all as specified and directed. |
| 23 | Supply and Fix in repairs 15mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 24 | Supply and Fix in repairs 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 25 | Supply and Fix in repairs 20mm gun metal gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 26 | Supply and Fix in repairs vitreous china wash down water closet pan (pedestal pattern) white coloured with integrated 'P' or 'S' trap outlet including conection to flush pipe and out going pipe and plastic watercloset seat cover closed pattern with flat bottom and PTMT hinging device complete all as specified and directed. |
| 27 | Supply and Fix in repairs vitreous china water closet squatting pan 'orissa pattern, white coloured of size 580 x 440 mm, with integral foot rest and outlet for 'P' or 'S' trap , WC pan shall be set in lean concrete below level of rim of pan to receive the floor finish complete all as specified and directed. |
| 28 | Supply and fix in repairs Vitreous China Half stall urinals, bowl type(back or corner wall type),complete including providing and fixing plugs,bedding urinal against wall in Cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws,pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe,grating and Union for discharge pipe complete all as specified and directed. |
| 29 | Supply and fix in repairs, vitreous China wash basin, Ivory, flat back, size 450mm x 300mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of supply fixing of waste pipe complete all as specified and directed. |
| 30 | Supply and fix in repairs Pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, 15mm dia of pipe, complete all as specified and directed. |
| 31 | Supply and fix in repairs 10Litres capacity low level PVC flushing cistern valveless, syphonic action type, , white, with inlet, ball valve, float and handle including brackets, Complete all as specified and directed by Engineer-in-Charge. |
| 32 | Supply and fix in repairs Stop valves 15mm bore, fancy type chromium plated cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 33 | Supply and fix in repairs 15mm concussive push button taps of CP cast copper alloy ,screwed for iron pipe and fixed complete all as specified and directed. |
| 34 | Supply and fix in repairs, kitchen sinks made of stainless steel 1mm thick with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 510mm x 610mm and bowl depth 178mm etc. complete all as specified and directed. |
| 35 | Supply and fix in repairs brass chromium plated bottle trap for wash basin/sink with inlet and outlet screwed for pipe or connections including necessary packing, union and cap bore of trap 32mm fixed complete all as specified and directed. |
| 36 | Supply and fix in repairs waste coupling brass CP for glazed ware sink, WHB etc with long screwed shanks and fly nuts complete of 32mm dia etc. complete all as specified and directed. |
| 37 | Supply and fix in repairs PVC connection 15mm size with PTMT nuts of length 450mm. etc. complete all as specified and directed. |
| 38 | Supply and fix in repair brass chromium plated urinal spreader with brass CP connector complete all as specified and directed. |
| 39 | Supply and fix in repairs for brass chromimum plated two way bib cock fancy type, 15mm bore ( min Wt. 550 grams) of approved make by EIC/ GE etc.complete all as specifed and as directed. |
| 40 | Supply and fix in repairs for brass chromium plated, 15 mm bore health faucet, ( flexy type) 1.00 metre long of approved make by EIC/GE etc. complete all as specified and directed. |
| 41 | Supply and fix in repairs Bib taps, fancy type chromium plated cast copper alloy with or without crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of size 15mm complete all as specified and directed. |
| 42 | Supply and fix in repair stainless steel plate rack of size 750mm x 1000mm made out of 1mm thick stainless steel sheet of grade 304 fixed all as per manufacturers instructions, Complete all as specified and as directed by Engineer-in-Charge. |
| 43 | Supply and fix in repairs bathroom mirror 450mm x 600mm bevelled edge mirror of selected quality glass mounted on 6mm thick PVC board and fixing with plastic plugs by means of brass srcews etc, Complete all as specified and as directed by Engineer-in-Charge. |
| 44 | Supply and fix in repairs 2 in 1 mixture valve of brass chromium plated, 15mm bore, screwed down, screwed for iron pipe or for brass ferule and fixed, Complete all as specified and as directed by Engineer-in-Charge. |
| 45 | Supply and fix in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with and including chromium plated bracket guard and railing 60cm long, Complete all as specified and as directed by Engineer-in-Charge. |
| 46 | Supply and fix in repairs swivel shower chromium plated with shower arm 15 mm size, 195 mm long with bend of 45º with flange fixed to 15 mm dia GI tubing, shower roses with or without swivel joints ,125mm size ,including fixing to steel pipe or union, Complete all as specified and as directed by Engineer-in-Charge. |
| 47 | Supply and fix in repairs toilet paper holder of chromium plated fixed to walls with and including chromium plated brass screws, Complete all as specified and as directed by Engineer-in-Charge. |
| 48 | Taking up or down 15 mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed |
| 49 | Refixing old steel tubing of 15 mm bore and connections in new or old position including necessary fittings (walls, ceilings, floors etc.) complete all as specified and directed. |
| 50 | Taking up or down 20 mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 51 | Refixing old steel tubing of 20 mm bore and connections in new or old position including necessary fittings (walls, ceilings, floors etc.) complete all as specified and directed. |
| 52 | Supply and fix 15mm bore Tubes medium grade galvanised with necessary fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed. |
| 53 | Supply and fix 20 mm bore Tubes Medium grade galvanised with necessary fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed. |
| 54 | Cutting chases, pinning in, making good to facings of brick wall where required and plastering in cement mortar 1:3 for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed. |
| 55 | Taking down GI/PVC pipe of 32mm and above including fittings in any position complete all as specified and directed |
| 56 | Supply and fix LDPE pipes 32mm dia, of pressure rating 6 kg/sqcm fixed to wall or laid in floor etc complete all as specified and directed. |
| 57 | Supply and fix in repairs 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm ² fixed complete to walls, ceilings or in floors etc. including necessary fittings complete all as specified and directed. |
| 58 | Supply and fix in repairs 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete type B1 1:2:4 using 20mm graded stone aggregate complete all as specified and directed by Engineer-in-Charge. |
| 59 | Supply and fix in repairs towel rail 'D' type 600mm long of stainless steel complete all as specified and directed. |
| 60 | Supply and fix battery suitable for sensor type urinal flush valve Jaquar model no SNR-51077 or techno commercial equivalent in CERA / Hindware complete all as specified and directed. |
| 61 | Supply and fix battery suitable for sensor type wash basin tap Jaquar model no SNR-51071 or techno commercial equivalent in CERA/ Hindware complete all as specified and directed. |
| 62 | Supply and fix Pressmatic pillar tap of Make Jaquar cat No PRS -061 or techno commercial equivalent in CERA/ Hindware complete all as specified and directed. |
| 63 | Supply and fix Pressmatic push cock for urinal of Make Jaquar cat No PRS -073 or techno commercial equivalent in CERA/ Hindware complete all as specified and directed. |
| 64 | Supply and fix Pressmatic bib taps of Make Jaquar cat No PRS -043 or techno commercial equivalent in CERA./ Hindware complete all as specified and directed. |
| 65 | Supply and Fix in repairs PVC waste pipe 32mm dia for WHB/Sink compete all as specified |
| 66 | Supply and fix in repairs wall mounted sensor tap for table top washbasins including all necessary fittings etc complete all as specified and directed. |
| 67 | Taking down door/window chowkat or frame with shuters ( without taking off shutter from the frame) area n.exc 1.5 Sqm each complete all as specified and directed. |
| 68 | Supply and fix factory made Soild PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed |
| 69 | Supply and fix Factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement.complete all as specified and directed |
| 70 | Supply and fix extruded aluminium alloy handles, fabricated type anodised 125 mm size, Complete all as specified and as directed by Engineer-in-Charge. |
| 71 | Supply and fix 125 mm long aluminium anodised barrel tower bolts of extruded section, Complete all as specified and as directed by Engineer-in-Charge. |
| 72 | Supply and fix 100 mm long MS butt hinges medium weight, cold rolled, fixed to wooden / PVC frame with suitable screws, Complete all as specified and as directed by Engineer-in-Charge. |
| 73 | Supply and fix aluminium door stopper of size 60 to 75 mm long double legged fixed to bottom rail of door shutter provided with rubber bushing at one end to stop the door at floor and other end provided with aluminium plate base fixed with door shutter with screws at appropriate height complete all as specified and directed. |
| 74 | Supply and Fix in repair aluminium (die cast body) door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and, ISI mark complete all as specified and directed. |
| 75 | Supply and fix door closer hydraulicallly regulated designation No 3 universal type suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kgs and fixed of aluminium (extruded section body) complete all as specified and directed. |
| 76 | Taking down cement plaster of any description on brick or stone walls, concrete walls etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 77 | Material and labour for 10mm thick rendering on fair faces of brick/concrete surfaces in CM 1:6 finished even & smooth complete all as specified and directed. |
| 78 | Material and labour for 5mm thick rendering on fair faces of concrete surfaces of ceiling in CM 1:3 finished even & smooth with out using extra cement complete all as specified and directed. |
| 79 | Material and labour for 15 mm thick rendering on fair faces of brick work or concrete surfaces intwo coats (first coat 10 mm thick in cm 1:4 and second coat 5 mm thick cement mortar 1:4, using liquid water proofing compound, finished fair & even complete all as specified and directed.Note : WPL shall be measured and paid separately. |
| 80 | Supply only liquid water proofing compound complete all as specified and directed. |
| 81 | Material and labour for preperation of newly plastered surface of wall and applying two coat of exterior emulsion over a coat of exteriorprimer after preparation of surfaces at any height including necessary scafolding etc complete all as specified and directed. |
| 82 | Material and labour for preparation of newly plastered surfaces of ceiling and applying two coat of oil bound distemper complete all as specified and directed. |
| 83 | Material and labour for preparation of newly plastered wall surface and applying two coats oil bound distemper over a coat of 1mm thick wall care putty and a coat of interior primer, Complete all as specified and as directed by Engineer-in-Charge. |
| 84 | Supply and fix in repairs 200mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed, Complete all as specified and as directed by Engineer-in-Charge. |
| 85 | Supply and fix in repairs 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed, Complete all as specified and as directed by Engineer-in-Charge. |
| 86 | Supply and fix in repairs 150mm long Extruded brass handles, fabricated type polished, Complete all as specified and as directed by Engineer-in-Charge. |
| 87 | Supply and Fix Floor door stopper 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of door complete all as specified and directed. |
| 88 | Supply and fixing vertical Zebra blinds for Windows dual layer polyster roller blinds of 100mm wides of required colour and sheds and necessary fittings of approved make complete all as manufacturer instructions and as directed by Engr-in-Charge. |
| 89 | Supply and fix in repair 9 feet pulley operated cloth drying system, aluminium anodized 22 mm outer dia pipe, channel assembly, locking system to hide rope knot, ropes 4 mm dia HDPE double core & fitting material etc complete all as specified and directed. (Make : Easy dry or other equivalent make as approved by GE. |
| 90 | Material and labour for 75 mm thick Cement concrete 1:3:6, type C1, (using 40 mm graded stone aggregate) in plinth protections/ hard standing path etc finishing the surface even and smoth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 91 | Complete removal of existing Roof treatment in any layers including demolition of PCC in roofs unreinforced and disposal of debris to distance exc 250 metre and not exc 500 metre out of MoD land complete all as specified and directed. Note: (i) The rates are inclusive of removal for any type old water proofing treatment over to Main RCC slab. (ii) All the dismantled debris are required to be removed from ARDE premises right after demolition so that process of user should not get obstructed. |
| 92 | Material and labour for PCC 1:2:4 (Type B0 using 12.5 mm graded crushed stone aggregate) (40mm thick avg) as in levelling course to match the undulations of roof and in coping, roof kerbs including benching etc including necessary formwork and finished rough surface complete all as specified and directed. |
| 93 | Material and labour for rendering 10 mm thick in cement mortar 1:3 mixed with liquid water proofing compound (ISI marked) of approved make as per manufacturer's instructions over RCC roof slab and finished fair and even without using extra cement complete all as specified and directed.(Liquid water proofing compound shall be measured and paid seperately as 'Supply only'.) |
| 94 | Supply and fix 3mm thick APP pre-fabricated membrane with and including non woven polyester matt central core of 160 gsm (min) impregnated and coated on both sides with and including layer of APP modified bitumen and finished with and including micro-perforated heat fusible polythene film on both surfaces over and including 0.3 litres / Sqm bituminous primer confrming to IS-3384 and applying a coat of hot blown bitumen 85/25 grade @1.2 Kg/Sqm over the membrane and finally applying two coats of aluminium paint @ 0.10 litres / Sqm each layer complete as per manufacturer's instructions and all as specified and directed . The weight of APP membrane shall not be less than 3.5 Kg / Sqm and laid over and including primed surface by using LPG/Butane torch and apply uniform pressure with roller. The overlap of membrane shall be 100 mm on sides and 150mm on end laps and complete all as specified and directed.Notes: (i) The work shall be executed only through authorised applicator of manufacturer as approval by GE. (ii) Contractor has to submit guarantee of treatment for 10 Years. |
| 95 | Supply and fix 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane including hacking out old broken glass any thickness, size from wooden/metal frame, glazed with putty or fixed with beads complete all as specified and directed. |
| 96 | Supply and fix 4mm thick Figured glass, pin headed type and glazing with oil putty in squares exceeding 0.5 Sq. M in each pane including hacking out old broken glass any thickness, size from metal frame/ wooden frame, glazed with putty or fixed with beads complete all as specified and directed. |
| 97 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones and Supply and fix 4mm thick Sheet glass, ordinary quality, in squares not exceeding 0.5 Sqm each pane, complete all as specified and directed. |
| 98 | Supply and Fix Rough cast wired glass, 6.4mm thick of area exc 1.00 Sqm and n. exc 1.50 Sqm and glazing clip with oil putty at any height including necessary arrangement complete all as specified and directed. |
| 99 | Demolition and breaking up drain PVC (SWR) pipes jointed in cement mortar/solvent, internal dia of pipe upto 110mm in any position with wall or in floor etc.complete all as specified and as directed. |
| 100 | Supply and fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls.complete all as specified and as directed. |
| 101 | Supply and fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls.complete all as specified and as directed. |
| 102 | Supply and fix 75 mm PVC (SWR) bends any radius complete all as specified and as directed. |
| 103 | Supply and fix 75 mm PVC (SWR) bends any radius with acess door complete all as specified and as directed. |
| 104 | Supply and fix 110 mm PVC (SWR) bends any radius complete all as specified and as directed. |
| 105 | Supply and fix 110 mm PVC (SWR) bends any radius with acess door complete all as specified and as directed. |
| 106 | Supply and fix 75 mm PVC (SWR) branch piece single (single Y) equal or unequal with access door complete all as specified and as directed. |
| 107 | Supply and fix 110 mm PVC (SWR) branch piece single (single Y) equal or unequal.with access door complete all as specified and as directed |
| 108 | Supply and fix 75 mm PVC (SWR) junction single (T single) equal or unequal.with access door.complete all as specified and as directed |
| 109 | Supply and fix 110 mm PVC (SWR) junction single (T single) equal or unequal with acess door. complete all as specified and as directed |
| 110 | S&F in repair aluminium powder coated ventilators partly fix and partly lowered of aluminium section designed DG-2762 (40 mm x 32 mm x1.5 mm thick) (wt 0.668 kg/mtr) frame and DG-2763 and middle section of designed DG-2763 (40 mm x 32 mm x 1.5 mm thick) (wt 0.654 kg/mtr), middle section DG-2546 (17.27 mm x 17.15 mm x 1.22 mm thick) (wt 0.124 kg/mtr) including 5 mm thick pinheaded figured glass louvers with blades of 100 mm heavy duty including with aluminium lever handle fixed panel shall be provided with 5 mm thick pin headed figured glass including all necessary rubber packing, anodized aluminium snap beading fixed with minimum 6 Nos of suitable size galvanised screws with PVC plug etc complete all as specified and directed. |
| 111 | Supply and Fix Soft Fibre Acoustical Suspended Ceiling System with Optra (Bevelled Tegular) Edge Tiles with 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ≥85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 66% GW & 74% RW. The tile shall be laid on Silhouette 15mm face exposed grid. colour white having rotary stitching on all Silhouette 'T' sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.5Kgs/M2 with a minimum pull out strength of 100 kgs. The Silhouette Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system and necessary angle of Armstrong make including taking down old ceiling etc complete all as specified and directed. |
| 112 | Providing & Fixing of Armstrong Mineral Fibre Acoustical Ceiling System with SIERRA OP (Bevelled Tegular) Edge Tiles With Armstrong 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.6, Light Reflectance ≥85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 16mm , suitable for Green Building application, with Recycled content of 31%. The tile shall be laid on Armstrong Suprafine 32 with 15 mm face exposed grid colour white having rotery stitching on all silhoutte type T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.5 Kgs/M2 & minimum pull out strength of 100 Kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system and necessarey aluminium angle of Armstrong make, including taking down old ceiling etc complete all as specified and directed. |
| 113 | Dismantling boarding or false ceiling of any description, fixed in any position complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |