|
| 1 | Providing and fixing alumimium partition of approved make conforming to IS: 733 and IS: 1285 having section thickness of min. 2mm to the required height, partly glazed and partly panneled or fully glazed or fully panneled using aluminium section satin/matt finish anodizing of required size for bottom, top, middle and vertical rails at required intervals panneling with 12mm thick nova pan or ancholam/WPC both side pre-laminated board fixed with sloping aluminium beeding alround with neoprene gasket glazing with min. 5.5mm forsted/plain glass fixed with alumimium channel beeding two way PVC lining/ rubber gasket to ensure water tightness and no rattaling including providing necessary cover mould using suitable alumimium section so as to take care of gaps between the walls/ ceiling / flooring and partitions etc. including frosted/Black/brown film & providing and fixing necessary fittings as specified and directed. (Make- Jindal, Indal, Hindalco)With powder coated partitions (minimum thickness of powder coating 50 micron)Partly glazed and partly panneled or fully glazed or fully panneled |
| 2 | Providing and fixing alumimium of approved make conforming to IS: 733 and IS: 1285 having section thickness of min. 2mm door frame and shutter side hung/sliding to consist of partly glazed partly panneled/ fully panneled/ fully glazed with 5.5mm thick glass sheet, plain or frosted glass fixed with two way PVC lining/rubber gasket to ensure notes tightness and no rattaling and panneling with 12mm thick nova pan or Ancholam/WPC board finished on both side as required using extruded alumimium section for shutter frame satin finish anodized including frosted film , P/F push-pull plates handles and of approved make and heavy duty fittings including tower bolts, hydraulic door closer/ floor spring, handles etc. including frosted/Black/brown film as per requirement of suitable capacity etc. complete as specified and directed by Engineer In charge. (Make- Jindal, Indal, Hindalco)With powder coated partitions (minimum thickness of powder coating 50 micron) |
| 3 | Fxing available partition with necessary modification including transporting the material at site, using accessory were material and labour etc.Complete all as per specified and directed by th Engg-Incharge. |
| 4 | Providing and fixing of frosted film of approved make on door & window glasses as per approved pattern / design complete in all respect as per direction of Engineer in-charge and as per site conditions. The colour and design will be approved by the competent authority (Make- Garware or 3M) |
| 5 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). |
| 6 | Supply and fixing bilingual signage (Hindi & English) matte finish look such as sticker type signage at site (on door or similar locations) in proper line & level. The signage letters shall be made with premium quality ACP/Acrylic sheet Board of approved colour, pasted on self-adhesive film of approved colour, including supply of all material labour etc. required for proper completion of work. Before making the signage text & font of letters in best fit size will be set in computer so as to give aesthetic look . complete as per direction of Engineer-in-charge |
| 7 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. |
| 8 | GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation and backed with a black Glass fiber acoustical fleece |
| 9 | Providing and fixing Storage Unit of all sizes as per site conditions & space availability with Drawers & shelves/all shelf type with shutters. Drawers with heavy duty sliding channel Unit made out of 19mm thick ISI marked ply board. All exposed faces should have 1.5mm thick approved laminate including using heavy duty hardware like hinges, handles, multipurpose lock as per requirement etc. complete all as specified and directed by Engineer-In-charge |
| 10 | Providing making and fixing in position counter consisting of top (all width 2inch-6 inch) made out of 25mm commercial ply of approved make supported on drawer unit of ht.2 ft -6 inch and vertical supports at regular internals as shown in drawing made out of 15mm thick approved commercial ply and the counter made above the table of required width and size with vertical divider all made out of 19mm thick approved commercial ply and 12mm thick approved commercial ply for front side of counter with approved laminate or 10mm teak wood lipping on all exposed edges and table top edges should be 1 ½ inch x1 ½ inch finishing with and approved colour and moulding plastic laminate 1.0mm thick for all exposed surface etc. all inside surface shall be 0.8mm thick approved laminate soft board of 12mm thick pasted with approved adhesive and covered with tepestery felt cloth of required colour including cost of all hardware like hinges, tower bolt, handles, knobs, computer ready-made keyboards, cable manager, CPU stand made by 19mm thick ply with approved laminate finish and locking arrangement with Godrej multipurpose lock etc. complete as specified and directed. |
| 11 | Painting with aluminium paint of approved brand and manufacture to give an even shade |
| 12 | Two or more coats on new work |
| 13 | TDismantling, shifting & reassembling Aluminum partition sytems |
| 14 | Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180- 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient temperature).Inverter Type - Cooling only |
| 15 | 2.0 TR with 5 Star BEE Rating |
| 16 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 17 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineerin- charge. Please Enable Macros to View BoQ information |
