|
| 1 | WOODEN FURNITUREChair writing : FD - 250, 280 This drawing pertains to Srl item No 1.01 to 1.09 here-in-after |
| 2 | Taking out unserviceable rail from chair writing and Supply and Fix new rail made out of 1st class hard wood (Teak) with suitable holes for caning, complete all as specified and as shown on drg. |
| 3 | Taking out unserviceable front legs from chair writing and Supply and Fix new front leg made out of 1st class hard wood (Teak), complete all as specified and as shown on drg. |
| 4 | Taking out unserviceable rear legs from chair writing and Supply and Fix new rear legs made out of 1st class hard wood (Teak), complete all as specified and as shown on drg. |
| 5 | Taking out unserviceable stiffeners from chair writing and Supply and Fix new stiffener made out of 1st class hard wood (Teak) complete all as specified and as shown on drg. |
| 6 | Taking out unservicable arm rest from chair writing and Supply and Fix new arm rest made out of 1st class hard wood (Teak) complete all as specifiedand as shown on drg. |
| 7 | Taking out unservicable back rest from chair writing and Supply and Fix new back rest made out of 1st class hard wood (Teak) complete all as specified and as shown on drg. |
| 8 | Material and labour removal of old existing unserviceable cane from chair writing and recaning in true Godrej Pattern with plastic cane 2mm to 2.5mm wide, white colour of Make ( Arya, Ajay, Shah). The caning shall be done only after repairing and polishing as stated above completer all as specified and as directed. |
| 9 | Taking out unserviceable shoe from chair writing with new PVC/hard rubber shoe complete all as directed by Engr in Charge. |
| 10 | Material and labour for preparation of old exposed wooden surfaces of repaired chair writing by scrapping with sand paper and smoothening of surfaces, filling of bore holes etc with wooden putty paste, rubbing of surfaces with sand paper till smoothening and polishing with french polish upto glossy finished all as directed by Engr - in- Charge. |
| 11 | Chair dining : FD - 279 & 228This drawing pertains to Srl item No 2.01 to 2.08 here-in-after |
| 12 | Taking out unserviceable rail from chair dining and Supply and Fix new rail made with 1st class hard wood (teak) with suitable holes for caning, complete all as specified and as shown on drg. |
| 13 | Taking out unserviceable front legs from chair dining and Supply and Fix new front leg made of 1st class hard wood (teak), complete all as specified and as shown on drg. |
| 14 | Taking out unserviceable rear legs from chair dining and Supply and Fix new rear legs made of 1st class hard wood (teak), complete all as specifiedand as shown on drg. |
| 15 | Taking out unserviceable side/centre stiffeners from chair dining and Supply and Fix new stiffener made of 1st class hard wood (teak), complete all as specified and as shown on drg. |
| 16 | Taking out unserviceable back rest from chair dining and Supply and Fix new back rest made of 1st class hard wood (teak), complete all as specified and as shown on drg. |
| 17 | Taking out unserviceable shoe from chair dining and Supply and Fix new PVC/hard rubber shoe approved quality, complete all as directed by Engr-in-Charge. |
| 18 | Material and labour removal of old existing unserviceable cane from chair dining and recaning in true Godrej pattern with plastic cane 2mm to 2.5mm wide, white colour. The caning shall be done only after repairing & polishing as stated above, complete all as specified and as directed. |
| 19 | Material and labour for preparation of old exposed wooden surfaces of repaired Chair Dining by scrapping with sand paper and smoothening of surfaces, filling of bore holes etc with wooden putty paste, rubbing of surfaces with sand paper till smoothening and polishing with french polish upto glossy finished, complete all as directed by Engr - in- Charge. |
| 20 | Chair Easy : FD - 229This drawing pertains to Srl item No 3.01 to 3.09 here-in-after |
| 21 | Taking out unserviceable rail/bead from chair easy and Supply and Fix new rail/bead made of 1st class hard wood (teak) with suitable holes for caning, complete all as directed and as shown on drg. |
| 22 | Taking out unservicable front legs from chair easy and Supply and Fix new legs made of 1st class hard wood (teak), complete all as directed and as shown on drg. |
| 23 | Taking out unservicable rear legs from chair easy and Supply and Fix new legs made of 1st class hard wood (teak), complete all as specified and as shown on drg. |
| 24 | Taking out unservicable seat frame from chair easy and supply and fix new seat frame from 1st class hard wood (teak) of section 75 mm x 40 mm of size 510 mm long in front and 480mm long in rear, complete all as specified and as shown on drg. |
| 25 | Taking out unservicable back frame from chair easy and supply and fix new back frame from 1st class hard wood (teak) of section 75 mm x 40 mm of size 510 mm long in front and 480mm long in rear, complete all as specified and as shown on drg. |
| 26 | Taking out unservicable arm rest from chair easy and supply and fix new arm rest of size 65 x 25mm x 610mm, complete all as specified and as shown on drg. |
| 27 | Material and labour removal of old existing unserviceable cane from chair easy and recaning (seat & back) in true Godrej pattern with plastic cane 2mm to 2.5mm wide, white colour of Make ( Arya, Ajay, Shah). The caning shall be done only after repairing & polishing as stated above, complete all as specified and as directed. |
| 28 | Taking out unserviceable shoe from chair easy and supply and fix new PVC/hard rubber shoe, complete all as directed by Engr-in-Charge. |
| 29 | Material and labour for preparation of old exposed wooden surfaces of repaired Chair Easy by scrapping with sand paper and smoothening of surfaces, filling of bore holes etc with wooden putty paste, rubbing of surfaces with sand paper till smoothening and polishing with french polish upto glossy finished all as directed by Engr - in- Charge. |
| 30 | Chair Wooden Bottom : FD-285This drawing pertains to Srl item No 4.01 to 4.08 here-in-after |
| 31 | Taking out of unserviceable side/rear/front rail from chair wooden bottom and Supply and Fix new rail made of 1st class hard wood (teak) for fixing of ply, complete all as specified and as shown on drawing |
| 32 | Taking out unserviceable front legs from chair wooden bottom and Supply and Fix new front legs made of 1st class hard wood (teak), complete all as specified and as shown on drawing. |
| 33 | Taking out unserviceable rear legs from chair wooden bottom and Supply and Fix new rear legs made of 1st class hard wood (teak), complete all as specified and as shown on drawing. |
| 34 | Taking out unserviceable stiffeners from chair wooden bottom and supply and fix new stiffener made of 1st class hard wood (teak), complete all as specified and as shown on drawing. |
| 35 | Taking out unserviceable back rest from chair wooden bottom and Supply and Fix new back rest made of 1st class hard wood (teak), complete all as specified and as shown on drawing. |
| 36 | Taking out unserviceable ply from seat of chair wooden bottom and Supply and Fix new Ply 12 mm thick BWR , complete all as specified and as shown on drawing. |
| 37 | Taking out unserviceable shoe from chair wooden bottom and supply and fix new PVC/hard rubber shoe, complete all as directed by Engr in Charge. |
| 38 | Material and labour for preparation of old exposed wooden surfaces of repaired Chair Wooden Bottom by scrapping with sand paper and smoothening of surfaces, filling of bore holes etc with wooden putty paste, rubbing of surfaces with sand paper till smoothening and polishing with french polish upto glossy finished, complete all as directed by Engr - in- Charge. |
| 39 | Bed ply top : FD - 246 This drawing pertains to Srl item No 5.01 to 5.09 here-in-after |
| 40 | Taking out old unservicable long rails from bed plywood top and S& F of new long rails made of 1st class hard wood (teak), complete all as specified and as shown on drawing. |
| 41 | Taking out unserviceable ply wood teak face and Supply and Fix of new 4mm thick one side teak face ply wood ISI Marked BWR of size 780 x 340 mm on both side of head board rest, complete all as specified and as shown on drawing. |
| 42 | All as per item No 5.02 here-in-before but size 780 x180 mm on both side foot boards rest, complete all as specified and as shown on drawing. |
| 43 | Taking out unserviceable plywood top from bed ply top and Supply and Fix new plywood 12 mm thick commercial BWR confirming to IS: 303, complete all as specified and as shown on drawing. |
| 44 | Taking out old unserviceable bottom rails of bed ply wood top and Supply and Fix of new bottom rails of 1st class hard wood (teak) of required shape and size, complete all as specified and as shown on drg. |
| 45 | Taking out old unserviceable legs from head board of bed ply top and Supply and Fix new legs of head board made of 1st class hard wood (teak) of required shape and size, complete all as specified and as shown on drawing. |
| 46 | Taking out old unserviceable legs from foot board of bed ply top and Supply and Fix new legs of foot board made of 1st class hard wood (teak) of required shape and size, complete all as specified and as shown on drawing. Please Enable Macros to View BoQ information |
| 47 | Taking out old unserviceable legs from foot board of bed ply top and Supply and Fix new legs of foot board made of 1st class hard wood (teak) of required shape and size, complete all as specified and as shown on drawing. Please Enable Macros to View BoQ information |