|
Supplying and stacking various type of Building, Road Other Construction Materials, at various places of Taluka UNA under Taluka Panchayat, UNA under MGNREGA (Annual Unit Rate)- providing formwork of ordinary timber planking so as togive a rough finish including centering shutteringstrutting and propping etc. height of propping andcentering below supporting floor to ceiling not exceeding4 m. and removal of the same for in situ reinforcedconcrete and plain concrete work in. (a) foundationsfootings bases of columns etc. and mass concrete., providing formwork of ordinary timber planking so as togive a rough finish including centering shutteringstrutting and propping etc. height of propping andcentering below supporting floor to ceiling not exceeding4 m. and removal of the same for in situ reinforcedconcrete and plain concrete work in. (b) flat surfacessuch as soffits of supspened floors slabs landings andthe like. (1) floors etc. upto 200 mm in thickness., providing formwork of ordinary timber planking so as togive a rough finish including centering shutteringstrutting and propping etc. height of propping andcentering below supporting floor to ceiling not exceeding4 m. and removal of the same for in situ reinforcedconcrete and plain concrete work in. (g) columnspillarsposts and struts. (1) square rectangular polygonalin plan., providing formwork of ordinary timber planking so as togive a rough finish including centering shutteringstrutting and propping etc. height of propping andcentering below supporting floor to ceiling not exceeding4 m. and removal of the same for in situ reinforcedconcrete and plain concrete work in. (h) (1) sides andsoffits of beams beam haunchings cantilevers girdersbressumers and lintels not exceeding 1 m. in depth., providing formwork of ordinary timber planking so as togive a rough finish including centering shutteringstrutting and propping etc. height of propping andcentering below supporting floor to ceiling not exceeding4 m. and removal of the same for in situ reinforcedconcrete and plain concrete work in. (c) vertical surfacesuch as walls (any thickness) partitions and the likeincluding attached buttresses & string course & the like., providing and fixing 35 mm thick shutters for doors,windows and clear story windows including anodisedalluminium butt hinges with necessary screws. (a) indianteak wood (ii) fully glazed., steel hysd, battens 75 mm x 100 mm, binding wires, c.i. cover with frame 300mm x 300mm, c.i. cover with frame 455mm x 610mm, c.i. cover with frame 500mm x 700mm, c.i. cover with frame 600mm x 850mm, cement (53 grade), coarse sand, coarse sand 5.0 k.m., coarse sand 5 to 10 k.m., coarse sand 10 to 15 k.m., coarse sand 15 to 25 k.m., coarse sand 25 to 50 k.m., coarse sand 50 to 100 k.m., common burnt clay bricks modular size 20x10x10 cm -, common burnt clay bricks modular size 20x10x10 cm - 5.0 k.m., 5 to 10 k.m., 10 to 15 k.m., 15 to 25 k.m., 25 to 50 k.m., 50 to 100 k.m., corrugated a.c. sheet 6 mm thick, crushed stone aggregate for hard quality 6 to 10mm size -, crushed stone aggregate for hard quality 6 to 10mm size - 5.0 k.m., crushed stone aggregate for hard quality 6 to 10mm size - 5 to 10 k.m., crushed stone aggregate for hard quality 6 to 10mm size - 10 to 15 k.m., crushed stone aggregate for hard quality 6 to 10mm size - 15 to 25 k.m., crushed stone aggregate for hard quality 6 to 10mm size - 25 to 50 k.m., crushed stone aggregate for hard quality 6 to 10mm size - 50 to 100 k.m., crushed stone aggregate for hard quality 10 to 20mm size, crushed stone aggregate for hard quality 10 to 20mm size 5.0 k.m., crushed stone aggregate for hard quality 10 to 20mm size 5 to 10 k.m., crushed stone aggregate for hard quality 10 to 20mm size 10 to 15 k.m., crushed stone aggregate for hard quality 10 to 20mm size 15 to 25 k.m., crushed stone aggregate for hard quality 10 to 20mm size 25 to 50 k.m., crushed stone aggregate for hard quality 10 to 20mm size 50 to 100 k.m., crushed stone aggregate for hard quality 20mm size, crushed stone aggregate for hard quality 20mm size 5.0 k.m., crushed stone aggregate for hard quality 20mm size 5 to 10 k.m., crushed stone aggregate for hard quality 20mm size 10 to 15 k.m., crushed stone aggregate for hard quality 20mm size 15 to 25 k.m., crushed stone aggregate for hard quality 20mm size 25 to 50 k.m., crushed stone aggregate for hard quality 20mm size 50 to 100 k.m., crushed stone aggregate for hard quality 40mm size, crushed stone aggregate for hard quality 40mm size 5.0 k.m., crushed stone aggregate for hard quality 40mm size 5 to 10 k.m., crushed stone aggregate for hard quality 40mm size 10 to 15 k.m., crushed stone aggregate for hard quality 40mm size 15 to 25 k.m., crushed stone aggregate for hard quality 40mm size 25 to 50 k.m., crushed stone aggregate for hard quality 40mm size 50 to 100 k.m., crushed stone aggregate for hard quality 40mm to 63mm size, crushed stone aggregate for hard quality 40mm to 63mm size 5.0 k.m., crushed stone aggregate for hard quality 40mm to 63mm size 5 to 10 k.m., crushed stone aggregate for hard quality 40mm to 63mm size 10 to 15 k.m., crushed stone aggregate for hard quality 40mm to 63mm size 15 to 25 k.m., crushed stone aggregate for hard quality 40mm to 63mm size 25 to 50 k.m., crushed stone aggregate for hard quality 40mm to 63mm size 50 to 100 k.m., distemper primer, dry distemper, enamel paint, enamel primer, fine sand, fine sand 5.0 k.m., fine sand 5 to 10 k.m., fine sand 10 to 15 k.m., fine sand 15 to 25 k.m., fine sand 25 to 50 k.m., fine sand 50 to 100 k.m., flat back wash basin colour glazed 450 x 300 size, g.i sheet 0.8 mm thick corrugated class-3, g.i sheet 0.8 mm thick semi-circular class-3, g.i. barbed wire, g.i. j or l hooks, galvanised mild steel tube medium grade 15mm dia, galvanised mild steel tube medium grade 20mm dia, galvanised mild steel tube medium grade 25mm dia, galvanised mild steel tube medium grade 32mm dia, gun metal screw down bib tap-15 mm dia, gun metal screw down bib tap-20 mm dia, gun metal wheel valve 15mm dia, gun metal wheel valve 20mm dia, gun metal wheel valve 25mm dia., gun metal wheel valve 32mm dia, gun metal wheel valve 40mm dia, guard stone, hand broken stone aggregate 25mm size to 90mm size, hand broken stone aggregate 25mm size to 90mm size 5.0 k.m., hand broken stone aggregate 25mm size to 90mm size 5 to 10 k.m., hand broken stone aggregate 25mm size to 90mm size 10 to 15 k.m., hand broken stone aggregate 25mm size to 90mm size 15 to 25 k.m., hand broken stone aggregate 25mm size to 90mm size 25 to 50 k.m., hand broken stone aggregate 25mm size to 90mm size 50 to 100 k.m., hand broken stone aggregate 40mm size to 63mm size., hand broken stone aggregate 40mm size to 63mm size. 5.0 k.m., hand broken stone aggregate 40mm size to 63mm size. 5 to 10 k.m., hand broken stone aggregate 40mm size to 63mm size. 10 to 15 k.m., hand broken stone aggregate 40mm size to 63mm size. 15 to 25 k.m., hand broken stone aggregate 40mm size to 63mm size. 25 to 50 k.m., hand broken stone aggregate 40mm size to 63mm size. 50 to 100 k.m., hard marrum, hard marrum 5.0 k.m., hard marrum 5 to 10 k.m., hard marrum 10 to 15 k.m., hard marrum 15 to 25 k.m., hard marrum 25 to 50 k.m., hard marrum 50 to 100 k.m., oil bound distemper, p.v.c bib tap 15mm. dia, p.v.c bib tap 20mm. dia, plastic emulsion paint, polished kota stone slab green. 30 mm thick, polished kota stone slab green. 25 mm thick, polished kota stone slab green. 40 mm thick, pre-cast cement concrete tiles, quarry spall., quarry spall. 5.0 k.m., quarry spall.5 to 10 k.m., quarry spall.10 to 15 k.m., quarry spall.15 to 25 k.m, quarry spall.25 to 50 k.m., quarry spall. 50 to 100 k.m., precast rcc jali 100 mm thick, precast rcc jali 25 mm thick, precast rcc jali 40 mm thick, precast rcc jali 50 mm thick, precast rcc jali 75 mm thick, r.c.c heavy duty non-pressure pipe i.s. class np 3 300mm dia., r.c.c heavy duty non-pressure pipe i.s. class np 3 300mm dia. 5.0 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 300mm dia. 5 to 10 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 300mm dia. 10 to 15 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 300mm dia. 15 to 25 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 300mm dia. 25 to 50 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 300mm dia. 50 to 100 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 450mm dia., r.c.c heavy duty non-pressure pipe i.s. class np 3 450mm dia. 5.0 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 450mm dia. 5 to 10 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 450mm dia. 10 to 15 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 450mm dia. 15 to 25 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 450mm dia. 25 to 50 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 450mm dia. 50 to 100 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 900mm dia., r.c.c heavy duty non-pressure pipe i.s. class np 3 900mm dia. 5.0 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 900mm dia. 5 to 10 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 900mm dia. 10 to 15 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 900mm dia. 15 to 25 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 900mm dia. 25 to 50 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 900mm dia. 50 to 100 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 600mm dia., r.c.c heavy duty non-pressure pipe i.s. class np 3 600mm dia. 5.0 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 600mm dia. 5 to 10 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 600mm dia. 10 to 15 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 600mm dia. 15 to 25 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 600mm dia. 25 to 50 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 600mm dia. 50 to 100 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 800mm dia., r.c.c heavy duty non-pressure pipe i.s. class np 3 800mm dia. 5.0 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 800mm dia. 5 to 10 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 800mm dia. 10 to 15 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 800mm dia. 15 to 25 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 800mm dia. 25 to 50 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 800mm dia. 50 to 100 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 1100mm dia., r.c.c heavy duty non-pressure pipe i.s. class np 3 1100mm dia. 5.0 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 1100mm dia. 5 to 10 k.m., 1r.c.c heavy duty non-pressure pipe i.s. class np 3 1100mm dia. 0 to 15 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 1100mm dia. 15 to 25 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 1100mm dia. 25 to 50 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 1100mm dia. 50 to 100 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 1200mm dia., r.c.c heavy duty non-pressure pipe i.s. class np 3 1200mm dia. 5.0 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 1200mm dia. 5 to 10 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 1200mm dia. 10 to 15 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 1200mm dia. 15 to 25 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 1200mm dia. 25 to 50 k.m., r.c.c heavy duty non-pressure pipe i.s. class np 3 1200mm dia. 50 to 100 k.m., s.w. gulley trap 150mm x 100 mm size., s.w. guly trap 100 x 100 mm size, stone dust, synthetic enamel paint, terrazo tiles chequered dark shade 22mm thick, terrazo tiles chequered light shade 22mm thick, terrazo tiles chequered dark shade 28 mm thick, terrazo tiles chequered light shade 28 mm thick, terrazo tiles dark shade 20 mm thick, terrazo tiles light shade 20 mm thick, unscreened gravel, urinal flat back, urinal ladies squatting pan, urinal squatting type, urinal stall type full size, urinal stall type half size, varnish, vitryfied granite tiles 8 mm to 10 m thick 24 x 24 size dark shade, vitryfied granite tiles 8 mm to 10 m thick 36 x 36 size, water proofing cement paint, white bela stone, white bela stone 5.0 k.m., white bela stone 5 to 10 k.m., white bela stone 10 to 15 k.m., white bela stone 15 to 25 k.m., white bela stone 25 to 50 k.m., white bela stone 50 to 100 k.m., white cement, white paint, white vitriour china wash down w.c. (european), white vitrious china sink 600mm x 450mm x 150mm, white vitrious ching w.c. sqatting pan (india type), precast concrete blocks (1:3:6) (39 x 20 x 19 cms), white glazed tiles 15cm x 15cm x 6cm., hollow concrete blocks (size 39 x 14 x 19 cms), m.s. angel, vitrified granite tiles 8 mm to 10 m thick 24 x 24 size antiskid, vitrified granite tiles 8 mm to 10 m thick 24 x 24 size light shade, weather proof acrylic exterior emulsion paint, s.s. aldrop 25 cm long of asis 304 grade, s.s. handle for door 15 cm size of asis 304 grade, s.s. railing pipe 16 mm x 16g asis 304 grade, s.s. railing pipe 50 mm x 16 g asis 304 grade, s.s. rialing sq pipe 32x32 mm x 16g asis 304 grade, s.s. stopper 60 cm long of asis 304, s.s. stopper 30 cm long of asis 304, s.s. stopper 20 cm long of asis 304, alluminium fixtures and fstenings., c.i.75 mm diameter rain water pipe, multy wall plycarbonate sheet 6 mm thick, plastic proofing compound., s.s. door / window hinges 4x1x1, s.s. door / window hinges 4x3/4x3/4, s.s. door / window hinges 3x3/4x3/4, ss sink glosy asis 304 grade x 1mm thick with over all size 610x460 mm & bowl size 560x410x200, ss sink glosy asis 304 grade x 1mm thick with over all size 510x432mm & bowl size 445x368x190, ss sink glosy asis 304 grade x 1mm thick with over all size 485x410 mm & bowl size 410x365x165, gully trap 100mm x 100 mm size., laminated sheet 1.00 mm thick, pvc swr pipes is 13592 for drain - 110 mmdia, pvc swr pipes is 13592 for drain - 160 mmdia, pvc swr pipes is 13592 for drain - 75 mmdia, pvc swr pipes is 13592 for drain - 90 mmdia, pvc swr coupler 110 mm dia, pvc swr coupler 75 mm dia, pvc swr single t - 75 mm dia, pvc swr single t -110 mm dia, anodised aluminum butt hinges 75 mm x63 mm x 3.2 mm, anodized alluminium section 63.50 x 38.10 x 1.2 mm @ wt. 0.643 kg/mt, glzed tiles piece wastege., paver block m200 grade 60mm thick, paver block m250 grade 60mm thick, polycarbonate multi wall roofing sheet, pre cast kerb block m250 grade, pvc water tank, wall primer of approved brand, 15mm dia. u.p.v.c. pipe ( ( sch 40) length 12.0 mt, 25mm dia. u.p.v.c. pipe ( ( sch 40) length 12.0 mt, 32mm dia. u.p.v.c. pipe ( ( sch 40) length 12.0 mt, 50mm dia. u.p.v.c. pipe ( ( sch 40) length 12.0 mt, aerated light weight concrete block 600 x 200 x 200 mm, solution 50 ml adhesive solvent, light weight calcium silicate tegular edged 595x595 modular acoustical celling tiles with 15 mm thick densified edges including 5percentage wastage, water tanker with pressure distributor/sprayer, angle iron 40 x 40 x 6, iron angle 75 x 75 x 6cm, nahni trap 100mm dia, cpvc pipe sdr 13.5 15 mm daimeter (1/2), cpvc pipe sdr 13.5 20 mm daimeter (3/4), cpvc pipe sdr 13.5 25 mm daimeter (1), cpvc pipe sdr 13.5 32 mm daimeter (1 1/4), cpvc pipe sdr 13.5 40 mm daimeter (1 1/2), cpvc pipe sdr 13.5 50 mm daimeter, cpvc pipe jointing solution 50 ml, rubble, rubble 5.0 k.m., rubble 5 to 10 k.m., rubble 10 to 15 k.m., rubble 15 to 25 k.m., rubble 25 to 50 k.m., rubble 50 to 100 k.m., tiles size 15 cm x 15 cm (glazed), tmt bar fe 500 d (4,8,10,12mm,16mm , 18mm, 20mm, 40mm), vitrified granite tiles 8 mm to 10 m thick 24 x 24 , supply tractor trolly with driver, rolling work 8 to 12 tone, mixture machine with operator, providing approved make ceiling fan with double ball bearing isi mark with condenser 230 volt a.c.50 hz 1200 mm sweep complete having 3 blades aluminium body and blade sets having ornamental design shanks [ make shall be approved by engineer in charge], providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or fan box., tube light with integral/ 22 24 watts, surge · 2kv,ip 20,conventional 4 feet(cat iii), led l s integral type,cool white with pc diffuser suitable for b22 l holder 5 to 8 watts, supplying and erecting led indoor fittings with leds of wattage 0.2 watt to 0.5 watt assembled on single mcpcb, with housing used as a heat sink shall be made of thick sheet steel conforming to is: 513/crca/ aluminium die cast powder coated and high u.v. & corrosion resistance with diffuser with company mark/name 160v to 270v, power factor more than 0.95, tho< 15percentage, cct 3000 k to 6500k, luminaire efficacy> 85 lumens/watt ,led led driver efficiency > 85 percentage ( fitting required lm 79 & lm 80 certificates) (note: below description have shown ranges of wattage capacity of led fittings.the engineer incharge may select any wattage capacitybetween the ranges shown.) (a) tube light with integral/ non integral driver, supplying and erecting led indoor fittings with leds of wattage 0.2 watt to 0.5 watt assembled on single mcpcb, with housing used as a heat sink shall be made of thick sheet steel conforming to is: 513/crca/ aluminium die cast powder coated and high u.v. & corrosion resistance with diffuser with company mark/name 160v to 270v, power factor more than 0.95, tho< 15percentage, cct 3000 k to 6500k, luminaire efficacy> 85 lumens/watt ,led led driver efficiency > 85 percentage ( fitting required lm 79 & lm 80 certificates) (note: below description have shown ranges of wattage capacity of led fittings.the engineer incharge may select any wattage capacitybetween the ranges shown.) (a) 5 10 watts, surge 2 kv, ip 20, conventional 1 to 2 feett cat ll, outdoor street light fitting side entry with clear acrylic /plastic i polystyrene cover complete with starter, polyester choke copper wound complete erected with 40/36 watt tube holders. with lead wire and connections. connection with one tube 36/40 watt.120 cms and adapter if required cat ii, supplying and erecting led indoor fittings with leds of wattage 0.2 watt to 0.5 watt assembled on single mcpcb, with housing used as a heat sink shall be made of thick sheet steel conforming to is: 513/crca/ aluminium die cast powder coated and high u.v. & corrosion resistance with diffuser with company mark/name 160v to 270v, power factor more than 0.95, tho< 15percentage, cct 3000 k to 6500k, luminaire efficacy> 85 lumens/watt ,led led driver efficiency > 85 percentage ( fitting required lm 79 & lm 80 certificates) (note: below description have shown ranges of wattage capacity of led fittings.the engineer incharge may select any wattage capacitybetween the ranges shown.) (a) 2 wire 1.5 sq. mm, supplying and erecting led indoor fittings with leds of wattage 0.2 watt to 0.5 watt assembled on single mcpcb, with housing used as a heat sink shall be made of thick sheet steel conforming to is: 513/crca/ aluminium die cast powder coated and high u.v. & corrosion resistance with diffuser with company mark/name 160v to 270v, power factor more than 0.95, tho< 15percentage, cct 3000 k to 6500k, luminaire efficacy> 85 lumens/watt ,led led driver efficiency > 85 percentage ( fitting required lm 79 & lm 80 certificates) (note: below description have shown ranges of wattage capacity of led fittings.the engineer incharge may select any wattage capacitybetween the ranges shown.) (b) 2 wire 2.5 sq. mm, supplying and erecting led indoor fittings with leds of wattage 0.2 watt to 0.5 watt assembled on single mcpcb, with housing used as a heat sink shall be made of thick sheet steel conforming to is: 513/crca/ aluminium die cast powder coated and high u.v. & corrosion resistance with diffuser with company mark/name 160v to 270v, power factor more than 0.95, tho< 15percentage, cct 3000 k to 6500k, luminaire efficacy> 85 lumens/watt ,led led driver efficiency > 85 percentage ( fitting required lm 79 & lm 80 certificates) (note: below description have shown ranges of wattage capacity of led fittings.the engineer incharge may select any wattage capacitybetween the ranges shown.) (c) 3 wire 1.5 sq. mm, supplying and erecting led indoor fittings with leds of wattage 0.2 watt to 0.5 watt assembled on single mcpcb, with housing used as a heat sink shall be made of thick sheet steel conforming to is: 513/crca/ aluminium die cast powder coated and high u.v. & corrosion resistance with diffuser with company mark/name 160v to 270v, power factor more than 0.95, tho< 15percentage, cct 3000 k to 6500k, luminaire efficacy> 85 lumens/watt ,led led driver efficiency > 85 percentage ( fitting required lm 79 & lm 80 certificates) (note: below description have shown ranges of wattage capacity of led fittings.the engineer incharge may select any wattage capacitybetween the ranges shown.) (d) 3 wire 2.5 sq. mm, providing isi mark medium class rigid pvc pipes of following size complete to be erected on/in wall or ceiling erected with necessary pvc fittings & junction boxes fixed with adhesive solution & cl s with following dia of pipes, in approved manner as directed(b) 25 mm, providing & erecting approved make oval conduit with necessary fittings fixed with adhesive solution and suitable cl s erected on wall / ceiling of following size. (2) 25mm, providing & erecting approved make oval conduit with necessary fittings fixed with adhesive solution and suitable cl s erected on wall / ceiling of following size. bakelite adopter for holder to be erected., providing following type of modular type accessories mounted with pvc / metallic/wooden box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection. as desired by engineer in charge(1)one no. sp 6 . cat.ii, providing following type of modular type accessories mounted with pvc / metallic/wooden box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection. as desired by engineer in charge (5) electronic hum free four or more steps eme fan regulator cat.ii, supplying earthpit of minimum bore dia. 225mm size ash or approved make safe earthing electrode consisting pipe-in-pipe technology as per is 3043-1987 made of corrosion free g.i.pipes having outer pipe dia of 80 mm having 80-200 micron galvanising, inner pipe dia of 40 mm having 200-250 micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications.[a] for electrical installation up to 440 v length of pipe - 1 mtrback filling compound - 1 nos. of bag of 15 kgs., approved make elcbs / rccbs conforming to is: 12640 and having sensitivity of 30 ma and short circuit withstand capacity of 6 ka and suitable for operation on single phase 240 v. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following max. rating erected as directed(i) 25 s.dp cat. ii, providing sheet steel powder coated mcb distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and din rail, confirming to is 13032 and bs 5486-1986 without mcb to house appropriate nos. of mcbs.(the dbs should be used of same company of mcb to be used) (a) single phase 6way ss double door, providing 240 v mcb double pole switch for motor & inductive load (c curve) having 10 ka breaking capacity & confirms to is : 8828 in existing box having following capacity (a) 32 . cat.ii, miniature circuit breaker single pole 1a to 25a suitable to operate on 240 v a.c. system and having breaking capacity 10 ka to be erected in existing box. confirming to is 8828/1996 with isi mark cat.ii, providing following shockproof tissino type accessories erected on 3 mm thick pc (polycarbonate) sheet in pvc/ metal/wooden box. erected on wall/ ceiling. (1) one no single pole 6 a switch / bell push, non decorative type 35 mm thick door shutter, door closers arrow type with spring 12 length as approved s le (30 cms), latch (tadi) as per s le approved sectional flats (heavy) brass 35 cms length, datta rubber for door size upto 1 (2.5cms), teak wood frames, glass 10 mm thick, steel plate & angle, rolling shutter rolling shutter of g.i. sheet any size grill, galvanised mild steel tube medium grade 65mm dia, murrum/ binding material, murrum/ binding material 5.0 k.m., murrum/ binding material 5 to 10 k.m., murrum/ binding material 10 to 15 k.m., murrum/ binding material 15 to 25 k.m., murrum/ binding material 25 to 50 k.m., murrum/ binding material 50 to 100 k.m., black stone for cooking platfrom (1.50 sqm), 12mm thick cement fibre board, boundry stone, p.v.c nahni trap, plain glass sheet 3 mm thick, plain glass sheet 4 mm thick, plywood with both faces teak finished 18mm thick, wast pipe for wash basin c.p 32mm dia, wast pipe for wash basin c.p 40 mm dia, water proofing materials of std. make in powder form, white lime (white washing), g.i.pipe 100mm dia, g.i.pipe 50mm dia a-class, g.i.pipe 40 mm dia a-class, paver block m300 grade 60mm thick, m.s village name board or junction board
|