|
Tender for Punjab Water Resources Department Talwara Canal Division Wrd Punjab Talwara Workname : Estimate For The Construction Of Ponds At Various Site Of Talwara Canal Division Under Hoshiarpur Canal And Dam Circle, W.R.D Punjab, Hoshiarpur During 2026-27 Name Of Firm Sr.No Description Unit Quantity Rate (In Figures) Rate (In Words) , Dressing Of New Earth Work Or Remoulding Work , Rehandling Of Earthwork , Dressing Bed And Preparation Of Sub Grade For Lining. , Excavation In Soil (Any Type) Using Hydraulic Excavator Ck 90 With Hydraulic Excavator Of 0.9 Cum Bucket Capacity Including Cutting, Trimming Bottom And Side Slopes, In Accordance With Requirements Of Lines, Grades And Cross Sections, Including All Lifts And Combined Lead Upto 30M. , 1.8 Meter High G.I. Barbed Wire Fencing 1.8 Meter High G.I. Barbed Wire Fencing With 2.4 Meter Angle Iron Posts 50X50x6mm Placed Every 3 Meters Centre To Centre 0.6 Meter Below Ground Level, Every 15Th Post, End Post, Corner Post Suitably Strutted And Provided With 12 Horizontal Lines And Two Diagonals Interwoven With Horizontal Wires Fixed With Gi Staples, Turn Buckles Etc. Including Foundation Concrete 1:2:4 Of Size 0.30X0.30X0.75M For Each Post Complete As Per Technical Clause 808 Of Mort&H Specifications , Jungle Clearance. , Excavation By Mechanical Means (Jcb Or Hydraulic Excavator) In Trenches For Pipe Lines With Straight Or Open Cutting In Streets Or Open Area Including Dressing Sides Levelling Of Beds Of Trenches To Correct Grade, Cutting Joint Holes, Refilling Consolidation, Watering , Including The Cost Of Diversion For Traffic, Crossing Over Trenches For Access To The Houses, Watching, Fencing, Etc. And Removal Of Surplus Soil Out Side/Inside The Town Involving Lead Upto 15 Meter Complete In All Respect. , Providing, Laying, Fixing & Jointing Of U.P.V.C. Pipes As Per Isi-4985 (Isi Marked With The Prior Approval Of Engineer-In-Charge) Along The Trenches And Laying The Same In Trenches To Correct Alignmentand Gradients, Cutting, Jointing And Testing Complete As Per Specifications (160Mmo/D Pvc Pipe Of 2.5Kgf/Sqcm) , Providing & Fixing C.I/D.I Flanged End, Stem Of Ss (Ais 1410) And Bronze (Gunmetal) Working Parts Sluice Valves Isi Marked 14846-2000, Including Jointing , Testing & Cost Of Nut ,Bolt & Insertion Sheet, All Carriage Complete (With The Approval Of Engineer Incharge). (150Mm I/D Sluice Valves Flanged) Classpn-1 As Per Isi , Supply And Installation Of Mechanical Flow Meter 150Mm Dia Complete In All Respects. , Construction Of Masonary Sluice Valve Chamber Excluding Sluice Valve Cover As Per Standard Design & Drawings Of Public Health Department.(Size 0.9 M. X 0.9 M.) , Providing And Fixing 160 Mm Tail End Point 6 Kg With Ms/Ci Flange (6Kgf Pressure) Confriming To Is Code With Latest Amendments If Any At Site Of Work Including Loading And Unloding If Any, Complete In All Respects. , Any Other Items Compatibility Report For Harpur.Xls Run On 28-03-2025 12:10 The Following Features In This Workbook Are Not Supported By Earlier Versions Of Excel. These Features May Be Lost Or Degraded When You Save This Workbook In An Earlier File Format. , Applying Priming Coat With Metal Primer On New Steel Or Iron Work Including Preparation Of Surface.
|