|
| 1 | Taking down cement plaster up to any height including raking out joints, hacking for key and scrubbing down with water etc to receive plaster complete all as specified and directed. |
| 2 | M & L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 3 | M&L for rendering 10mm thick in cement mortar 1:3 on fair faces of brick/concrete surface of ceiling and finishing the surfaces even and smooth without using extra cement complete all as specified and directed |
| 4 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over a coat of primer over one coat of cement based wall care putty complete all as specified and directed. |
| 5 | M&L for preparation of newly plastered surfaces of ceiling/chajja or similar suspended work and applying three coats of white wash complete all as specified and directed. |
| 6 | M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. |
| 7 | M&L for preparation of old painted surfaces of any description not other wise described including filling the depressions with cement based wall care putty and applying one coat of plastic emulsion paint interior grade with roller finish (plain) or with suitable brush on walls complete all as specified and directed. |
| 8 | M&L for complete removal of existing treatment of old painted surfaces of any description not other wise described and applying two coats of plastic emulsion paint interior grade with roller finish (plain) or with suitable brush on walls over one coat of cement based wall care putty complete all as specified and directed. |
| 9 | M&L for preparation of old decorated surfaces of walls (plastered or un plastered) including cornices, pilaster etc by brooming down with steel wire brushing, scrapping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including filling the depressions with cement based wall care putty and applying one coat of oil bound distemper complete all as specified and directed. |
| 10 | M&L for complete removal of existing treatment on walls and applying two coats of oil bound distemper over and including one coat of primer over one coat of cement based wall care putty complete all as specified and directed |
| 11 | M&L for preparation of old decorated surfaces of walls (plastered or un plastered) including cornices, pilaster etc by brooming down with steel wire brushing, scrapping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including filling the depressions with cement based wall care putty and applying one coat of white wash complete all as specified and directed. |
| 12 | M&L for complete removal of existing treatment on walls and applying two coats of white wash over and including filling the depressions with cement based wall care putty complete all as specified and directed |
| 13 | M&L for preparation of old decorated surfaces of ceiling/bottom of chajja and similar suspended work (plastered or un plastered) including cornices, plaster etc by brooming down with steel wire brushing, scrapping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including filling the depressions with cement based wall care putty and applying one coat of white wash complete all as specified and directed. |
| 14 | M&L for complete removal of existing treatment on ceiling/bottom of chajja and similar suspended work and applying two coats of white wash complete all as specified and directed |
| 15 | M&L for old painted surface of any description of brick, stone concrete, kerb stone or plastered surface over 10 cm width or girth not otherwise described for and applying one coat of synthetic enamel paint with approved tint or shade complete all as specified and directed by Engineerr in Charge. |
| 16 | M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint of tint/shade as approved, complete all as specified and directed. |
| 17 | M&L for preparation of old painted steel or iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint of tint/shade as approved, complete all as specified and directed. |
| 18 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads |
| 19 | S&F 3mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and directed. |
| 20 | S&F 3mm thick figured glass, pin head type and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and directed. |
| 21 | S&F PVC coloured wall paper to wall or floor with suitable epoxy based adhesive including removing old wall paper and making good surfaces complete all as specified and directed |
| 22 | S&F in repair of 25mm dia Stainless steel curtain rods complete all as specified and as directed by Engineer-in-Charge. |
| 23 | S&F in repair fancy SS brackets for 25mm dia drapery curtain rods all as specified and as directed by Engineer-in-Charge. |
| 24 | S&F in repair fancy SS brackets for 25mm dia drapery curtain rods all as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |