Indian Tenders

Tender Notice

TDR 55435512
Tendering Authority Department Of Local Bodies
Tender No 02/2025-26 MLA
Tender ID 2026_DLB_557749_2
Tender Brief Tender For Construction Of Tube-Well Upto 100 Meter Depth And Above In All Type Of Rocks By Dth System And Over Burden To Accommodate Casing Pipe Of Following Sizes In All Types Of Soils And Over Burden Including Lowering Of Casing Pipes But Excludi
City Keshoraipatan
State Rajasthan
Document Fees INR 1000 /-
EMD INR 4000.0 /-
Tender Value INR 2 Lakhs /-
Tender Type Tender
Bidding Type Open Tender
Competition Type Indian

Tender Details

Tender for Construction Of Tube-Well Upto 100 Meter Depth And Above In All Type Of Rocks By Dth System And Over Burden To Accommodate Casing Pipe Of Following Sizes In All Types Of Soils And Over Burden Including Lowering Of Casing Pipes But Excluding Cost Of Casing Pipes As Per Is : 2800 (Part I & Ii) 1979 Specifications. The Work Would Be Completed After Obtaining Sand Free Water. The Tube Well Should Have A Throughout Bore As Per Nominal Dia Of Casing Pipe 125 Mm Dia Nominal Bore , Development Of Tube Well As Per Is Specification Using Suitable Compressor To Give Sand Free Water For Required Yield Of The Gravel Packed Tube Well. , Supply Of Erw M.S. Black Casing Pipe Isi Marked (Is: 4270/1992) Of Grade Fe410 Of Following Nominal Bore Sizes At Site Of Work. , Supply And Fixing Of Tube Well Cover Of M.S. Sheet (6Mm Thick) With Nuts And Bolts Complete For Casing Size:125 Mm Dia , Supply And Fixing Of M.S. Clamp Set Of 50 ×6Mm Flat Iron With Nuts And Bolts Etc. For Holding The Riser Pipe Assembly Of Submersible Pump Set. , Supply Installation Testing and Commissioning of Radial / Mixed Flow Submersible Motor Pump Sets Isi Marked (Is:8034-1989) Of Approved Make With Required Accessories Including Making Connection Suitable For T.W./ D.C.B./ Open Well. The Job Includes Lowering Of Riser Pipe, G.I./ H.D.P.E. Pipe With Rope, Cables, Installation Of Complete Fitting And Accessories, Jointing Of Electrical Cables Up To Switch Board. All Labour For Testing Of Submersible Pumps Set And Supply Of Water To Water Mains, Complete In All Respect.100 Mm Diameter Submersible Pump Shall Have Following Hp Rating, Phase, Head, Minimum Discharge Respectively.1.5 Hp, 1-Ø, (50-130)Mtr, , Supply And Fixing Of Oil / Air Break Starter Panel Made Out Of Sheet Steel Powder Coated Enclosure Comprising Of Over Load Protection Relay, Short Circuit & Single Phasing Protection, On / Off Push Buttons, Ammeter, Voltmeter, Indicating Lamps Etc. Complete In All Respect Suitable For Following Rating Motors.For Single Phase Submersible / Monoblock Pump , Providing & Fixing Of Hdpe Pipe Isi Mark (Is:4984/95) For Water Supply (Suitable For Submersible & Jet Pump) With Required Fittings40 Mm Od 6 Kg / Cm2 , Providing Of Synthetic Rope For Submersible Pump Isi Marked (Is:5175) Of Following Sizes , Providing And Laying Isi Marked P.V.C. Insulated Submersible Cable Confirming To Is:694 With Flexible Copper Conductor Including Making Connection Etc. As Required4.0 Sq.Mm 3 Core Flat , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centring And Shuttering - All Work Upto Plinth Level :1:1½:3 (1 Cement : 1½ Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size). , Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank Isi : 12701 Marked With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank: , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. Internal Work - Exposed On Wall20 Mm Nominal Outer Dia .Pipes. , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. Internal Work - Exposed On Wall20 Mm Nominal Outer Dia .Pipes. , Steel Work Welded In Built Up Sections/ Framed Work Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works.

Key Dates

Publish Date 09-05-2026
Last Date of Bid Submission 15-05-2026
Tender Opening Date 18-05-2026

Contact Information

Company Name Department Of Local Bodies
Contact Person EO NAGAR PALIKA KESHORAIPATAN
Address KESHORAIPATAN

BOQ Items

Name of Work:-
Sl. No. Item Description
1Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes but excluding cost of casing pipes as per IS : 2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube well should have a throughout bore as per nominal dia of casing pipe 125 mm dia Nominal bore
2Development of tube well as per IS specification using suitable compressor to give sand free water for required yield of the gravel packed tube well.
3Supply of ERW M.S. black casing pipe ISI marked (IS: 4270/1992) of grade Fe410 of following nominal bore sizes at site of work.
4Supply and fixing of tube well cover of M.S. sheet (6mm thick) with nuts and bolts complete for casing size:125 mm dia
5Supply and fixing of M.S. clamp set of 50 ×6mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set.
6SITC of radial / mixed flow submersible motor pump sets ISI marked (IS:8034-1989) of approved make with required accessories including making connection suitable for T.W./ D.C.B./ Open well. The job includes lowering of riser pipe, G.I./ H.D.P.E. pipe with rope, cables, installation of complete fitting and accessories, jointing of electrical cables up to switch board. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect.100 mm diameter Submersible pump shall have following HP Rating, phase, Head, minimum Discharge respectively.1.5 HP, 1-Ø, (50-130)Mtr,
7Supply and fixing of Oil / Air break Starter panel made out of sheet steel powder coated enclosure comprising of over load protection relay, short circuit & single phasing protection, ON / OFF push buttons, ammeter, voltmeter, indicating lamps etc. complete in all respect suitable for following rating motors.For single phase Submersible / Monoblock pump
8Providing & Fixing of HDPE pipe ISI mark (IS:4984/95) for water supply (suitable for submersible & jet pump) with required fittings40 mm OD 6 kg / cm2
9Providing of synthetic rope for submersible pump ISI marked (IS:5175) of following sizes
10Providing and laying ISI marked P.V.C. insulated submersible cable confirming to IS:694 with flexible copper conductor including making connection etc. as required4.0 Sq.mm 3 core flat
11Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :1:1½:3 (1 Cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).
12Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank:
13Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall20 mm nominal outer dia .Pipes.
14Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall20 mm nominal outer dia .Pipes.
15Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Please Enable Macros to View BoQ information

Other Detail

Information Source https://eproc.rajasthan.gov.in
Download FileName File Description File Size
Download 947b9d7b-5a50-4e78-897f-135f3a611775.html Tender Documents 0 KB
Download BOQ_992936.xls Tender Documents 0 KB
Download Tendernotice_1 (17).pdf Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.