|
| 1 | FOUNDATION & PLINTH-:Earth work excavation of foundation in hard soil rough dressing & levelling bed & depositing the excavated earth away from work site withen 50 M initial lead and 1.5 M initial lift with cost of labour, T.& P. etc. required for the work complete as per the specification and direction of the EIC |
| 2 | Filling foundation & plinth with filling sand well watered & rammed including cost, conveyance, royality & taxes etc. of all materials required for the work, labour charges etc. complete as per the specification & direction of EIC |
| 3 | Providing & laying Cement Concrete ( 1:3:6 ) using 40mm crusher broken granite metal including cost, conveyance, royality & taxes etc. of all materials, mixing & laying concrete, watering & curing, labour charges etc. complete |
| 4 | RCC M-20 grade with crushed granite coarse aggregate of size 20 mm downgraded mixed in mixing plant with vibrator including cost of all materials, machineries & labour including cost, conveyance, labour, all taxes & royality etc complete including centring & shuttering as per direction of E.I.C. |
| 5 | A) Column Base & Footings |
| 6 | B) Column up to plinth |
| 7 | C) Plinth Beam |
| 8 | Supplying, providing and straightening the coiled or bent up M.S. / HYSD bars, cutting, bending and tying grills and placing in position with ties, spacers and binding the grills in binding wire 18 to 20 mm. gauge for R.C.C. works as per approved design and drawings with all leads, lifts and delifts and all cost, carriage, taxes of the reinfocement bars and binding wire and labour charges etc. complete as per the specification & direction of Engineer in charge. |
| 9 | (i)Flyash Brick Masonry in Cement mortar (1:6) in F&P including cost, conveyance, royality & taxes etc. of all materials, mixing & laying, watering, curing, labour charges etc. complete as per the specification & direction of Engineer in charge. |
| 10 | (ii) 125 mm thick wall with CM(1:4) |
| 11 | GROUND FLOOR-:RCC M-20 grade with crushed granite coarse aggregate of size 20 mm downgraded mixed in mixing plant with vibrator including cost of all materials, machineries & labour including cost, conveyance, labour, all taxes & royality etc complete including centring & shuttering as per direction of E.I.C. |
| 12 | A) Column |
| 13 | B) Lintel Band |
| 14 | C) Roof Beam |
| 15 | E) Chajja |
| 16 | F) Roof Slab |
| 17 | G) Staircase |
| 18 | Supplying, providing and straightening the coiled or bent up M.S. / HYSD bars, cutting, bending and tying grills and placing in position with ties, spacers and binding the grills in binding wire 18 to 20 mm. gauge for R.C.C. works as per approved design and drawings with all leads, lifts and delifts and all cost, carriage, taxes of the reinfocement bars and binding wire and labour charges etc. complete as per the specification & direction of Engineer in charge. |
| 19 | Flyash Brick Masonry in Cement mortar (1:6) in S/S including cost, conveyance, royality & taxes etc. of all materials, mixing & laying, watering, curing, labour charges etc. complete as per the specification & direction of Engineer in charge. |
| 20 | i. 250 mm thick brick wall |
| 21 | ii. 125 mm thick brick wall with 1:4 cement mortar |
| 22 | Providing and laying cement plaster on surface after cleaning the surface taking out point including cost of all materials labour cuting taxes etc complete as per instruction fo architect/ Engineer incharge. |
| 23 | i. 12 mm cement plaster 1.6 to out side surface |
| 24 | ii. 16mm cement plaster 1.6 over brick work to inside walls. |
| 25 | iii. 6mm cp 1:4 over concrete surface |
| 26 | a.Wall painting two coats with weather coat over a coat of primer of approved shade on new work to give an even shade including including cost, carriage and taxes etc. of all materials required for the work and labour charges etc. compl as per the specification & direction of EIC |
| 27 | b.Distempering two coats to walls with distemper of approved shade on new work to give an even shade including cost of distemper per 1 sqm……..etc compl. |
| 28 | c.Painting two coats with approved enamel paint over a coat of primer of approved quality including cost of enamel paint, primer,brushes & other materials, T. & P. and taxes etc. of all materials required for the work and labour charges etc. complete as per the specification & direction of Engineer in charge. |
| 29 | Fixing tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment o match the shades of the tiles including rubbing and polishing complete excluding cost of precast TILES. |
| 30 | a. Providng and fixing of FRP (PVC)door including frame and all necessary accessories such as tower blot, handles, hinges etc complete in all respects. |
| 31 | b. Providing and fixing Iron Door Shutters with Angle Iron Frames including fixing of Hold Fasts, Aldrops, Hinges etc. all complete including fixing with C.C. (1:2:4) complete. |
| 32 | c. Providing and fixing Iron Window Shutters with Angle Iron Frames and Grill including fixing of Hold Fasts, Aldrops, Hinges etc. all complete including fixing with C.C. (1:2:4) complete. |
| 33 | d. Providing and fixing Iron Window Grill including fixing etc. all complete |
| 34 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railling using 50mm dia of 32mm x 32mm x 2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm 3 rows in staircase as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T & P etc required for the work complete in all respect. (Data for 3.26 sqm.) |
| 35 | Fixing tiles in dados skrting on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tile. |
| 36 | Fixing of Granite floor for kitchen platform |
| 37 | Cup board & Shoo Rack |
| 38 | FIRST FLOOR-:RCC M-20 grade with crushed granite coarse aggregate of size 20 mm downgraded mixed in mixing plant with vibrator including cost of all materials, machineries & labour including cost, conveyance, labour, all taxes & royality etc complete including centring & shuttering as per direction of E.I.C. |
| 39 | A) Column |
| 40 | B) Lintel Band |
| 41 | C) Roof Beam |
| 42 | E) Chajja |
| 43 | F) Roof Slab |
| 44 | G) Staircase |
| 45 | Supplying, providing and straightening the coiled or bent up M.S. / HYSD bars, cutting, bending and tying grills and placing in position with ties, spacers and binding the grills in binding wire 18 to 20 mm. gauge for R.C.C. works as per approved design and drawings with all leads, lifts and delifts and all cost, carriage, taxes of the reinfocement bars and binding wire and labour charges etc. complete as per the specification & direction of Engineer in charge. |
| 46 | Flyash Brick Masonry in Cement mortar (1:6) in S/S including cost, conveyance, royality & taxes etc. of all materials, mixing & laying, watering, curing, labour charges etc. complete as per the specification & direction of Engineer in charge. |
| 47 | i. 250 mm thick brick wall |
| 48 | ii. 125 mm thick brick wall with 1:4 cement mortar |
| 49 | Providing and laying cement plaster on surface after cleaning the surface taking out point including cost of all materials labour cuting taxes etc complete as per instruction fo architect/ Engineer incharge. |
| 50 | i. 12 mm cement plaster 1.6 to out side surface |
| 51 | ii. 16mm cement plaster 1.6 over brick work to inside walls. |
| 52 | iii. 6mm cp 1:4 over concrete surface |
| 53 | Fixing tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment o match the shades of the tiles including rubbing and polishing complete excluding cost of precast TILES. |
| 54 | a. Providng and fixing of FRP (PVC)door including frame and all necessary accessories such as tower blot, handles, hinges etc complete in all respects. |
| 55 | b. Providing and fixing Iron Door Shutters with Angle Iron Frames including fixing of Hold Fasts, Aldrops, Hinges etc. all complete including fixing with C.C. (1:2:4) complete. |
| 56 | c. Providing and fixing Iron Window Shutters with Angle Iron Frames and Grill including fixing of Hold Fasts, Aldrops, Hinges etc. all complete including fixing with C.C. (1:2:4) complete. |
| 57 | d. Providing and fixing Iron Window Grill including fixing etc. all complete |
| 58 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railling using 50mm dia of 32mm x 32mm x 2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm 3 rows in staircase as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T & P etc required for the work complete in all respect. (Data for 3.26 sqm.) |
| 59 | a.Wall painting two coats with weather coat over a coat of primer of approved shade on new work to give an even shade including including cost, carriage and taxes etc. of all materials required for the work and labour charges etc. compl as per the specification & direction of EIC |
| 60 | b.Distempering two coats to walls with distemper of approved shade on new work to give an even shade including cost of distemper per 1 sqm……..etc compl. |
| 61 | c.Painting two coats with approved enamel paint over a coat of primer of approved quality including cost of enamel paint, primer,brushes & other materials, T. & P. and taxes etc. of all materials required for the work and labour charges etc. complete as per the specification & direction of Engineer in charge. |
| 62 | Fixing tiles in dados skrting on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tile. |
| 63 | Rain water down pipe including fitting fixing cost of 100mm pipe and bend etc |
| 64 | Cup board & Shoo Rack |
| 65 | STAIRCASE HEAD ROOM-:RCC M-20 grade with crushed granite coarse aggregate of size 20 mm downgraded mixed in mixing plant with vibrator including cost of all materials, machineries & labour including cost, conveyance, labour, all taxes & royality etc complete including centring & shuttering as per direction of E.I.C. |
| 66 | A) Column |
| 67 | B) Roof Beam |
| 68 | C) Roof Slab |
| 69 | Supplying, providing and straightening the coiled or bent up M.S. / HYSD bars, cutting, bending and tying grills and placing in position with ties, spacers and binding the grills in binding wire 18 to 20 mm. gauge for R.C.C. works as per approved design and drawings with all leads, lifts and delifts and all cost, carriage, taxes of the reinfocement bars and binding wire and labour charges etc. complete as per the specification & direction of Engineer in charge. |
| 70 | Flyash Brick Masonry in Cement mortar (1:6) in S/S including cost, conveyance, royality & taxes etc. of all materials, mixing & laying, watering, curing, labour charges etc. complete as per the specification & direction of Engineer in charge. |
| 71 | i. 250 mm thick brick wall |
| 72 | Providing and laying cement plaster on surface after cleaning the surface taking out point including cost of all materials labour cuting taxes etc complete as per instruction fo architect/ Engineer incharge. |
| 73 | i. 12 mm cement plaster 1.6 to out side surface |
| 74 | ii. 16mm cement plaster 1.6 over brick work to inside walls. |
| 75 | iii. 6mm cp 1:4 over concrete surface |
| 76 | Providing and fixing Iron Door Shutters with Angle Iron Frames including fixing of Hold Fasts, Aldrops, Hinges etc. all complete including fixing with C.C. (1:2:4) complete. |
| 77 | a.Wall painting two coats with weather coat over a coat of primer of approved shade on new work to give an even shade including including cost, carriage and taxes etc. of all materials required for the work and labour charges etc. compl as per the specification & direction of EIC |
| 78 | b.Distempering two coats to walls with distemper of approved shade on new work to give an even shade including cost of distemper per 1 sqm……..etc compl. |
| 79 | c.Painting two coats with approved enamel paint over a coat of primer of approved quality including cost of enamel paint, primer,brushes & other materials, T. & P. and taxes etc. of all materials required for the work and labour charges etc. complete as per the specification & direction of Engineer in charge. |
| 80 | E.I-Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor or ISI marked with 20 mm dia non-metallic PVC flexible conduit with 6Arnp, 250V Modular switch IS! marked and ceiling rose ISI marked mounted on metal box having front Modular cover of suitable size, metal box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as carth wire including all accessories and connection.(Make of wire-Anchor/Havells/Finolex ) (Make or switch - Legrand /Roma) |
| 81 | Ground Floor |
| 82 | -do- light point Group-A |
| 83 | fight point Group-B |
| 84 | -do- li ht oint Grou -C |
| 85 | First Floor |
| 86 | -do- li ht oint Grou -A |
| 87 | -do- li ht oint Grou -B |
| 88 | -do- /i ht oint Grou -C |
| 89 | Ground Floor |
| 90 | Fan point & Surface ceiling LED light Group-B |
| 91 | Group-C |
| 92 | Fan Point & surface LED Light First Floor |
| 93 | Group-B |
| 94 | Group-C |
| 95 | Ground Floor |
| 96 | -do- EX Fan point Group-C |
| 97 | First Floor |
| 98 | -do- EX Fan point Group-C |
| 99 | Ground Floor |
| 100 | -do- Cal/ Bel/ point Group-C |
| 101 | First Floor |
| 102 | -do- call Bel! point Group-C |
| 103 | Point wiring to 5A /6Amp socket outlet with 2 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20mm dia nonmetallic PVC flexible conduit with piano type switch, Phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required (Make of wire -Finolex/ Anchor/ HavellsN-Guard) ( Make of switch Roma /Legrand ) |
| 104 | Ground Floor |
| 105 | Separate point- |
| 106 | S/F of 5 Amp plug with switch on existing board (Modular Type )(Roma/Logrand) |
| 107 | First Floor |
| 108 | Point wiring to 5A /6Amp socket outlet with 2 X l fisq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20mm dia nonmetallic PVC flexible conduit with piano type switchi Phonolic Earninated shcct suitable size ISI marked MS box and earthing point with 1 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor for loop carlhing etc. as required (Make of wire -FinoJex/ Anchor/ Havells/V-Guard) ( Make of switch Roma /Legrand ) |
| 109 | Separate point- |
| 110 | SF of 5 Amp plug with switch on existing board (Modular Type )(Roma/Legrand) |
| 111 | Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front eincluding providing and fixing of 6pin 6Amp & 16Amp socket outlet and 16Amp Modular switches connection (Make- Legrand/Roma) |
| 112 | Recessed wiring to submain of tho ro//owing FR PVC insu/ntod g/ng/o coro u/tistrand copper conductor of IS/ Markod confinn/ng to IS-69d// 990 In 20mm a nonmeta/ic heavy duty noxiblo conduct 1, 6 sqmm thick along w/l/l ro//ow/ng sqmm FR PVC insulated single com multisttand coppor conductor os oortlt w/ro as required complete in all mspoct as por dimction or Eng/noor In chamo (Havel/sFino/ex/Anhor.) |
| 113 | Ground Floor |
| 114 | 2x1.5 sqmm +1x1.5 sqmm 1100 Volts confirming to IS 694/1990 |
| 115 | 2x2,5 sqmm +1x1.5 sqmm 1100 Volts confirming to IS 694/1990 |
| 116 | 2x4 sq mm+1x1.5 sqmm 1100 Volts confirming to IS 694/1990 |
| 117 | 2x6 sq mm+1x2.5 sqmm 1100 Volts confirming to IS 694/1990 in 25 mm dia non-metalic heavy duty flexib[c conduit |
| 118 | 4 X10 sq.mm +2 X4 sq.mm -do-25mm dia |
| 119 | For Inverter wiring 1 X 1.5sqmm |
| 120 | First Floor |
| 121 | sqmm sqmm 1100 Volts confirming to IS 694/1990 |
| 122 | 2x2.5 sqmm +fxt.5 sqmm 1100 Volts confirming to IS 694/1990 |
| 123 | 2x6 sq mm+1x2.5 sqmm 1100 Volts confirming to [S 694/1990 in 25 mm dia non-metalic heavy duty flexible conduit |
| 124 | For Inverter wiring 1 X 1.5sqmm |
| 125 | SIF of modular Computer Board consisting 3 nos 5amp and 1 nos 15amp switch and socket ( Make of switch - Roma [Legrand ) |
| 126 | Ground Fioor |
| 127 | SF of A.C point consisting of 32Amp DP MCB and stator with all connection complete in all respect as per direction of Engineerin charge (Roma/Legrand ) |
| 128 | Ground Fioor |
| 129 | Supply and fixing of superior type Ding Dong call bell / buzzer of IS/ marked, on 6\\" X 4\\" conforming to IS-2268/1994 and bell push of IS/ marked , conforming to {S-1293/ 1988 (make-Conal Anchor) |
| 130 | SF of StandardEarthing with medium class 40mm 3Mtr. Long IS/ marked G/ Earth pipe including accessories such as funnel G/ nut, Bolt, washor, hinged coverplate with looking arrangement, 40mm to 20G/ rediusor 5nos 20mm dia holes on G/ pipe required charpo/ salt, Excavation of earth brick work in ccment mortar complete in al/ respect as per specification of SR 2011 and as per Direction of Engineer-in -Chage, |
| 131 | proving and fixing or 8 SWG(4mm) dia copper wire on surface or in recess for loop earthing along with existing surface /rcccessed conduit /submain wiring /cable as required |
| 132 | SF Of Copper Plate Earthing (600x600x3mm)with running Copper Hat 25x5mm from coper plate to funel of 40mm dia G/ PIPE heavy duty Wilh including al/ accessories, excavation of earth and providing masonary work with cover plate having loccking arangement and and , charcoal, salt , funnel , tinned brass bolt, check nut and washer complete in all respect as per Govt. schedule of rate 2011 specification as per Direction or Engineering -in-Charge. |
| 133 | Extra copper flat 25 x 5mm for running earth |
| 134 | SF of Bakelite Anglo holder/Battcn Ho/do r or IS/ tnatfrcd in placo or coiling Rose complete in al/ respect as per düoction or Engineer in chorgo (Mako Cona /Anchor/ Havcl/s). |
| 135 | S/F of Ix18 watt T5 fitting with all acossorios in complclo (Havells/Phi!ips/Ctompton ) in direction of Enginocrin chorgc |
| 136 | S/F. of 15Wt. LED Surface mounting down lights of( MAKEHavels/philIips/Crompton ) |
| 137 | S/Fof 9W LED Bulb (Havells/Philips/Crompton) |
| 138 | Bulkhead fitting Energy saving new geration IOW LED IP65 bulkhead luminaire with o al diffuser IOWLED6000K Phili s/Havetts/crom ton |
| 139 | S/F of Street light of 90 Watt new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic |
| 140 | S/F of A.C Ceiling fan 48\\" size. (Make-Usha-PoIycab Vital /crompton decora/ Crompton jura.) |
| 141 | SIF of step type Modular Fan Regulator with all connection complete in all respect as per direction of Engineer in charge(Make-Roma/Legrand) |
| 142 | S/F of 12 inch Heavy duty (Mctalic Colour) Exhaust Fan with wall cutting, plastring, paintingwith al! connection complete in all respect as per direction or Engineer- in- charge. (Usha maxx aor dew white /CG TRANS Air/Have!s-venti air DS/Oöent -air flow)) |
| 143 | Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution 415V on sudace/recess, complete with tinncd copper bus bar, neutra/ bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachab/c gland plate, interconnections, phosphatized and powder painted including earthing etc. as required ( MAKE- |
| 144 | 6 way (6+18) double door horizontal type |
| 145 | Providing and fixing of following capacity TP & N MCB switch unit inside the existing mcb distribution box including drilling holes in the box making connections, etc as required .( MAKE-Legrand/Seimens/schneidcrn- & T) |
| 146 | 100 Amp TP & N MCB |
| 147 | Providing and fixing or following capacity DP MCB switch unit inside the existing mcb distribution box including drilling holes in the box making connections, etc as required ( MAKE-Legrand/Seimens/schneider/L & T) |
| 148 | 63/40Amp DPMCB |
| 149 | supply and fixing of 5 to 32 amp rating 240 volt c series miniature circuit breaker suitable for lighting and other loads of the following poles in the existing MCB DB ISI maH |
| 150 | Single pole |
| 151 | supply and fixing of singlc pole mcb with sheet steel enclosure *distribution board ,on surface /recess, complete with tinned copper bus bar ,neulra/ bus bar ,earth bar ,din bar ,dertachable gland plate ,interconnection .phosphatc and powdcrpainted including including earthing cct. as required ( but with out MCB/RCCB/ISLOATOR MAKE-Legrand/Seimens/schneider/L & T) |
| 152 | 8 WAY,DOUBLE DOOR |
| 153 | 12 WAY,DOUBLE DOOR |
| 154 | Supply of 50.3 % Core 1.1KV Grade IS/ Marked Armoured Cable (Make-Polycab/Gfoster/Nicco) |
| 155 | Laying of one number of PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling |
| 156 | 250 amp PANEL BOARDS/F of 250 amp panel board made of 16 SWG 2 mm C.R sheet with powder coated with provision of following items with fabrication errectiontesting and commissioning of total enclosed panel board fo size (1.2*1.3) sq mtr with copper bus bar of 250 copper bus bar, internal connection and provision for termintation of incoming outgoing cable, earthing, danger board etc. as per direction of Engineer-In-Charge.complete with supply and fixing of following switch gear (MAKE- Legrand/Siemens/Schneider)INCOMING1) 250 AMP 4P36 KA MCCB, with thermal magnetic releasewith 125 ampauto manual changeoverOUTGOING2 Nos of 63 amp DP Mcb, 2 nos 63 amp TPN Mcb, 2 nos of 100 Amp 16 KA Mccb |
| 157 | PH-:Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. |
| 158 | 20mm dia PVC ASTM pipe (sch-80) |
| 159 | Ground Floor |
| 160 | 25mm dia PVC ASTM pipe (sch-80) |
| 161 | Ground Floor |
| 162 | 32mm dia PVC ASTM pipe (sch-80) |
| 163 | 40mm dia PVC ASTM pipe (sch-80) |
| 164 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. |
| 165 | 15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) |
| 166 | 15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make) |
| 167 | 15 mm dia CP S.B. Bib cock(CON-CHR-037KN) |
| 168 | 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) |
| 169 | 20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make) |
| 170 | 15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make) |
| 171 | 25mm dia brass full way valve (Shakti make) |
| 172 | 32mm dia brass full way valve (Shakti make) |
| 173 | 40mm dia brass full way valve (Shakti make) |
| 174 | 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make) |
| 175 | 15mm CP Extension piece |
| 176 | 125mm CP grating |
| 177 | 15mm size C.P. flange |
| 178 | Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge |
| 179 | 2000 liters capacity PVC water storage tank |
| 180 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge. |
| 181 | Ground Floor |
| 182 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge |
| 183 | Ground Floor |
| 184 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. |
| 185 | Ground Floor |
| 186 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. |
| 187 | 110mm U-PVC SWR Pipe (Supreme /Ashirvad) |
| 188 | 110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 189 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 190 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 191 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 192 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 193 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 194 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 195 | 110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make) |
| 196 | 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) |
| 197 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 198 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. |
| 199 | 580mm size Orissa pan (Hindware/Parryware/Neycer make) |
| 200 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge |
| 201 | 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 202 | Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal |
| 203 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge |
| 204 | European water closet with 'p' trap plain(Hindware/Parryware/Neycer make) |
| 205 | EWC(Matrix set)No.70002(P-18) |
| 206 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge |
| 207 | 550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal |
| 208 | Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink |
| 209 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 210 | 25mmx600mm long CP towel rail |
| 211 | Towel ring |
| 212 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. |
| 213 | 600mmx125mm plate glass shelf with CP/NP guard rails. |
| 214 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. |
| 215 | 600mmx450mm size B.E mirror (swivelled type) |
| 216 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 217 | CP soap holder |
| 218 | Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge. |
| 219 | ½” x 5” CP Shower (Plaza Deluxe Make) |
| 220 | Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 221 | Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 222 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge |
| 223 | Inside size 76cmx76cmx46cm with 18” dia RCC MH cover |
| 224 | Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge |
| 225 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge |
| 226 | 100mm dia P.V.C. pipe |
| 227 | 150mm dia P.V.C. pipe |
| 228 | Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. |
| 229 | MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover ) |
| 230 | Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 231 | 1 No 50 Users Septic tank |
| 232 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge. |
| 233 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft. |
| 234 | Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC. |
| 235 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 236 | Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge. |
| 237 | Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge. |
| 238 | Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge |
| 239 | RCC floor, roof slab chhaja up to 4.430 m height |
| 240 | Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge. |
| 241 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 242 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:6) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 243 | Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge |
| 244 | Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification. |
| 245 | Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge. |
| 246 | Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
