Indian Tenders

Tender Notice

TDR 55379101
Tendering Authority Tata Memorial Centre
Tender No KS/ET-16/CCTV SURVEILLANCE ASHA NIWAS/2026
Tender ID 2026_TMC_907782_1
Tender Brief Corrigendum : Tender For Supply Installation Testing and Commissioning of Cctv Surveillance System For Asha Niwas Building At Actrec C Us
City Raigad
State Maharashtra
Document Fees Refer document
EMD INR 151440.0 /-
Tender Value INR 75.72 Lakhs /-
Tender Type Tender
Bidding Type Open Tender
Competition Type Indian

Tender Details

Tender for Supply Installation Testing and Commissioning of Cctv Surveillance System For Asha Niwas Building At Actrec C Us

Corrigendum Details

Sr No CorrigendumDate Corrigendum CorrigendumType NewSubmissionDate
1 10-06-2026 date extension Date 23-06-2026
2 04-06-2026 date extension2 Date 11-06-2026
3 04-06-2026 date extension2 Date 11-06-2026
4 28-05-2026 Extension Date 04-06-2026
5 28-05-2026 Extension Date 04-06-2026
6 28-05-2026 Extension Date 04-06-2026

Key Dates

Publish Date 10-06-2026
Last Date of Bid Submission 23-06-2026
Tender Opening Date 24-06-2026

Contact Information

Company Name Tata Memorial Centre
Contact Person Director TMC
Address Engineering services, Ground Floor, Pushp Building (Old St. Jude Building), ACTREC

BOQ Items

Name of Work:- SITC of CCTV surveillance system for Asha Niwas Building at ACTREC C us
Sl. No. Item Description
1SITC of 5 MP IR Vandal Dome Camera with(2mm to 4mm at lower end) & (9mm to 15mm at higher end) auto focus motorized optical zoom vandal proof metal body , 1/2.8” or better PoE Support, NAS Storage, SD Card(256GB or better ) Support, In-built MicrophoneTrue WDR, 3D Noise Reduction, Adaptive Streaming, Smart Streaming andCyber Security Features: STQC Certified including all required fixing accessories , and as per technical specificatons mentioned in tender documents
2SITC of 5 MP IR Bullet Camera with(2mm to 4mm at lower end) & (9mm to 15mm at higher end) auto focus motorized optical zoom or better vandal proof metal body 1/2.8” or better PoE Support, NAS Storage,SD Card(256GB or better ) Support, , In-built Microphone True WDR, 3D Noise Reduction, Adaptive Streaming, Smart Streaming Cyber Security Features: STQC Certified including all required fixing accessories , and as per technical specificatons mentioned in tender documents
3SITC of 32 Channel NVR with 4K Support as per technical specifications , 32 IP Channel Inputs; 4K HDMI, 1/1 Audio I/O and 2/1 Alarm I/O , 4 SATA HDD Support (12TB Capacity per Slot, Hard Disk Not Included) including video management software for client PC and as per technical specifications mentione din tender documents.
4SITC of 256 GB SD card for camera
5SITC of 10TB or higher Sata Enterprise Hard disk for Recording as per technical specifications mentioned in tender
6SITC of fully loaded RJ-45 24 port Patch Panel with tool-less keystone jacks having the compliance / Certifications for ISO 9001:2015 & ROHS
7SITC of 24 Port 10/100/1000 Gigabyte PoE Network Switch , 24 Nos RJ 45 ,10/100/1000 PoE+ ports and 4 combo ports (RJ-45 interface and SFP port ) , power cords and mounting accessories and equivalent to technical specification mentioned in tender documents.
8SITC of IT rack -19\\" Wall mounted rack 15U(double section) with acrylic glass door with the accessories -[Two Fan position tray with two 90 CFM fans(AC 230V),3 Horizontal cable manager- 3nos, AC power panel strip with 5 X 5 AMP /15Amp sockets ,fuse and on/off switch, 1 packet mounting hardware.
9Supplying and fixing 42U Rack with 6 inch Castor wheels and front brake Floor Standing Rack withMain Frame Pillar of 1.6mm CRCA Sheet with removable side panels, L- Shape adjustable VerticalMounting Rail of 2mm with 'U'Marking completely knocked-down condition (CKD) Shape, fitted with 4number cooling fans, minimum 8nos two line cable entry/exit provision at top and bottom with rubberprotection, Front door 5mm Toughened Glass with MS frame or MS perforated with lock, Rear MS ventedor perforated door, Powder coated Color- RAL- 7035 or black, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1number, etc. complete as required
10Supplying, installation, testing and commissioning of Media Convertor Lc type 1 gig 1000BASE-T to 1000BASE-LX Media Converter: SM, Max distance 15km. 1 RJ-45&1 fiber port (LC)
11SITC of SFP Module 10G fiber support10km
12SITC of PATCHCORD, SM (OS2), DUPLEX LC-LC, PC TYPE, 3M, LSZH
13SITC of PATCHCORD, SM (OS2), DUPLEX LC-LC, PC TYPE, 10M, LSZH
14SITC of Wifi Access point with transmitter and received with power supply for lift inside camera
15Supplying and fixing (rack dressing) 2 meter length, UTP Patch cord of Cat 6 type in position having the compliance / Certifications for ISO 9001:2015 & ROHS.
16SITC of CAT-6 cable through casing-capping, PVC conduit for camera to switch connectivity. Cat6 cable series consists of 100- Ohm impedance, 4-pair UTP cables for horizontal installations in local area networks (LANs). All cables meet and exceed Category 6/Class E requirements in TIA 568-C.2, and ISO/IEC11801. These cables are UL Listed and UL & ETL verified.
17SITC of PVC Conduit pipe 32mm for Cat 6 cable laying
18PVC Cable tray 50 x 50 mm
19SITC of Accessories & Connecotrs RJ45 & DC Pins Pair
20SITC of PVC Box 4 x 4 weather proof for camera IP 67
21SITC of HDMI cable 10MTr
22SITC of metal Bracket for Camera installation as per site requirements
23Online UPS - Input supply: Single Phase, Output Supply: Single Phase. Supplying, installation, Testing & Commissioning of following capacity at full load (Unity Power Factor) ON LINE Uninterrupted Power Supply (UPS) system suitable for Single Phase input, Single Phase output AC Supply. The UPS shall include a Rectifier, inverter, battery bank suitable for 30 minutes back up (Battery VAH capacity shall not be less than 1600 VAH per KVA of UPS rating per Hour backup time) on full load (Battery shall be VRLA, SMF in ABS Container) and Static Bypass switch along with provision for manual bypass, suitable isolation transformer for additional protection against neutral faults etc. The UPS systems shall be Microprocessor based Digital Control, using Insulated Gate Bipolar Transistor (IGBT)'s both for the rectifier & inverter with PWM (Pulse Width Modulation) Technology. The quality of design, manufacturing and inspection process should confirm to the relevant Inter-national standards such as IEC/EN/VDE. The operating efficiency of the UPS systems shall be >95% at 100% non-linear loads. Current total harmonic distortion(ITHD)/ total demand distortion (TDD) on the input grid shall be < 5% at 100 %load. (The required LC filters shall be included in UPS cost), extreme power factor kit to be include to limit the input pf to 0.99 and output powerfactor shall be unity (i.e. kw rating of the UPS shall be kva rating x 1 ) however UPS shall be suitable to take load at 0.7 laging to 0.7 leading power factor loads. UPS shall be suitable for incoming supply AC single phase 160-270V 50 Hz and delivering output AC supply true sine wave single phase 220/230/240 Volt, 50 Hz +/- 0.2Hz, Overload capacity of 120% for 10 mins and 150% for 1 minute. Operating temperature 0 to 40 0C, Relative humidity 0-95% non condensing, noise level less than 60db at 1 meter distance, Protection for Under voltage, over voltage, abnormal output voltage, battery over charging, output over current, short circuit, battery deep discharge , 10 KV surge. Display for watt/VA,Amp and Voltage power parameters etc. UPS shall comply with low voltage electromagnetic compatibility (EMC) achieved as per EN 6204, EN6204 Part I and Part 2, it shall be a Voltage and Frequency Independent (VFI) type UPS (as per standard IEC 62040-1, 2 & 3) . The UPS should be with IGBT Based Inverter Technology, Communication RS232/ RS485/ SNMP port open protocol for BMS integration as per approved by Engineering in charge. Required battery racks, DC breaker of suitable rating and interconnecting copper conductor cable of suitable size and connectors and all required accessories are inclusive in the cost. The UPS should have QR code which should contain drawing, test report OEM manual, Geo- Tag of manufacturing location etc
242 KVA UPS
256 KVA UPS
26SITC of PC workstation: Intel Core i7 14th Gen Processor16 GB Ram, 512 GB SSD + 1 TB Seagate SATA HDD2 GB Graphic Card, Wired Keyboard & Mouse23.8” or more Monitor, 2 Port Serial Card, 1 Port Parallel CardWindows 11 Pro Preloaded, 1 Yrs Warranty by OEM as per technical specifications mentioned in Tender.
27SITC of 55\\" LED 4K UHD smart LED TV with VGA input , 2HDMI port with Wallmount Stand , with remote and other accessories as per site installation and as directed by OIC-EIC Resolution: 4K Ultra HD (3840x2160) | Refresh Rate: 60 hertzConnectivity: Wi-Fi (Built-in) | 3 HDMI portse | 1 USB ports to connect hard drives and other USB devices | eARC | Bluetooth 5.0 | Optical | EthernetSound: 20 Watts Output | 2.0 Ch Speaker | AI Sound (Virtual Surround 5.1 up-mix) | Auto Volume Levelling | Bluetooth Surround ReadySmart TV Features: AI ThinQ & WebOS 22 with User Profiles α5 Gen5 AI Processor 4K | Display: 4K Ultra HD LED Display | 4K Upscaler | AI Brightness Control
28Configuration and integration charges for New CCTV system, and installation of software in work station. Providing View at Security.
29Supplying and fixing following size/ modules, PVC / GI box alongwith modular base & cover plate for modular switches in surface or recess etc. as required. • All the power socket tagging to be provided , PVC tags to be provided.• All the power sockets inside and power panel inside wiring ferruling to be done as instructed by EIC ES
306 Module
31Supplying and fixing following modular switch/ socket on theexisting modular plate & switch box including connections butexcluding modular plate etc. as required.
32Modular Socket 6A/16A
33Modular Socket 6A/16A
34SITC of Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire including PVC conduicts , bends , and all fixing accessories ( Rate for one mtr circuit i.e. 3 x 2.5sqmm wire) for power points Please Enable Macros to View BoQ information

Other Detail

Information Source https://eprocure.gov.in/eprocure/app
Download FileName File Description File Size
Download 150c2766-d989-46b5-b979-b1056e3b09db.html Tender Documents 0 KB
Download anneI.pdf Tender Documents 0 KB
Download AnnexureForm.xls Tender Documents 0 KB
Download BOQ_954127.xls Tender Documents 0 KB
Download Drawing.pdf Tender Documents 0 KB
Download TD.pdf Tender Documents 0 KB
Download Tendernotice_1 (1).pdf Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.