Name of Work:- पाण्डेय बाबा पेट्रोल पंप एवं दियरा चौराहा पर सड़क सुरक्षा का कार्य । | Sl. No. | Item Description | |
| 1 | Providing and applying Tack Coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom for D.B.M.Including 1% Labour Cess & cost of bitumen. | | 2 | Providing and laying Dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause No. 505 complete in all respects.Including 1% Labour Cess & cost of bitumen. | | 3 | Providing and applying Tack Coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared Primed surface/bitumen surface cleaned with mechanical broom.S.I. 503 for B.C.Including 1% Labour Cess & cost of bitumen. | | 4 | Providing and laying Bituminous Concrete 30 mm thick with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects.Including 1% Labour Cess & cost of bitumen. | | 5 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. complete as per direction of Engineer. (Marking on Table Top) | | 6 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads onBituminous Surface. (Repeated/Tranvers bar) | | 7 | S/F Retro-Reflective sign Board etc complete work.Retro-reflectorised Traffic sign as per IRC-67-2012 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC :67-2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer / Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012. Legends, letters, numerals and borders etc should be as per MoRTH specification No-801.3.7 . Proof of the same in form of government report shall be uploaded while quoting tender. i) 90 cm equilateral tringle with diffinitation plate size (20cm X 60cm) .PLACE IDENTIFICATION (Accident Prone Area) | | 8 | TRAFFIC SIGN -STOP | | 9 | TRAFFIC SIGN -MAXIMUM SPEED LIMIT | | 10 | Construction of Subgrade and Earthen Shoulders 3 Km Distance.(Cartage Earth) Please Enable Macros to View BoQ information |
|