|
| 1 | Supplying and drawing following sizes of PVC insulated PVC sheathed copper conductor unarmoured multicore cable in the existing poles/pipe to the fitting i/c providing suitable copper lugs connections etc. as reqd. |
| 2 | 3 x 1.5 sq.mm |
| 3 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 4 | 63 mm dia (OD-63mm & ID-51 mm nominal) |
| 5 | Supply of PVC insulated and PVC sheathed / XLPE insulated armoured aluminium conductor power cable (As per IS 7098 (Part-1) of 1.1 KV grade i/c connection testing etc.as required. |
| 6 | 3.5 C x35 sq. mm |
| 7 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required |
| 8 | Up to 35 Sq mm |
| 9 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 10 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and makinggood the same in case of recessed conduit as required.A)32 mm |
| 11 | 25 mm |
| 12 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 13 | 3½ X 35 sq. mm (32mm) |
| 14 | SITC of 18 watt outdoor LED wall uplighter made up of Die cast aluminium alloy with clear toughened glass diffuser ,powder coated finish with IP66,IK07 protection i/c chasing cutting connection testing etc. complete as required. |
| 15 | SITC of 3 watt LED outdoor In Ground luminaire with clear toughened glass diffuser,stainless steel powder coated finish with IP67 protection i/c chasing cutting connection testing etc. complete as required. |
| 16 | SITC of 8 Watt LED Bollard Light of height 450-460 mm made up of die cast aluminium alloy with clear polycarbonate diffuser ,powder coated finish with IP65,IK10 protection on foundation of size 300x300x600 mm i/c connection testing etc. complete as required. |
| 17 | SITC of 6 watt LED outdoor step downlighter with clear acyrylic diffuser ,powder coated finish with IP67 protection i/c chasing cutting connection testing etc. complete as required. |
| 18 | SITC of 6 watt outdoor LED wall downlighter made up of PDC aluminium body with clear toughened glass diffuser with powder coated finish with IP66,IK07 protection i/c chasing cutting connection testing etc. complete as required. |
| 19 | SITC of 18 watt outdoor LED focus light for fountain having stainless steel finish with step tempered glass diffuser with IP68,IK08 protection i/c chasing cutting connection testing etc. complete as required. |
| 20 | SITC of 30 watt underwater LED light for fountain having stainless steel finish with step tempered glass diffuser with IP68,IK08 protection i/c chasing cutting connection testing etc. complete as required. |
| 21 | SITC of 1 HP openwell submersible pump set single phase fountain pump with head range 12-27 mtr. ,discharge 160-20 LPM i/c connection testing etc. complete as required. |
| 22 | Supply, Installation, Testing and Commissioning of Outdoor type feeder pillar LT panel with IP55 Protection, suitable for 415 V,3 phase, 50 Hz AC supply system fabricated in compartmentalised design from CRCA sheet steel of 2.0 mm thick for frame work and covers with LED indicator, etc. complete as required. suitable base frame of 50x5 mm MS angle with suitable size of PCC foundation. The following switch gears and accessories to be provided. MCCB shall be thermal magnetic release having overload, shortcicuit adjustable settings & Ics = Icu. |
| 23 | INCOMING :- 125 Amp, 36 KA, FP MCCB -01 No.Digital Voltmeter & AmmeterC.T's 60/5Amp , CL 1.0R,Y,B indicating LED setControl MCB-5ABusbar: 200 Amp Aluminium TPN busbar.Outgoing: i)32 Amp, 10KA, 4P MCB with DOL starter rated for 3 HP with On /Off push buttons & LED Indicators & Ammeter - 01 setsii)DP MCB 32 Amp -3 Nos.iii) SP MCB 10 Amp-15 Nos. |
| 24 | Supplying, installation erection testing and commissioning aesthetically designed decorative Pole: ‐ 4 mtr. Steel tubular pole are made out of galvanized mild steel tubes with following characteristics:i)Accessories: Ø88.9 Ringii)LuminaireCoupling: Ø50 - Ht.60mmiii)ProductFinish: Powder Coatingiv)ProductFinishColour: Graphite Greycast i/c connection testing etc. complete as required.(as per drawing/image attached) |
| 25 | Supplying, installation erection testing and commissioning aesthetically designed decorative fitting with following characteristics:i)Dimension: Ø298x480ii)Wattage: 27Wiii)CCT: 3000Kiv)Diffuser: Translucent Acrylicv)LuminaireCoupling: Ø50 - Ht.60mmvi)Product Finish: Powder Coating i/c connection testing etc. complete as required.(as per drawing/image attached) |
| 26 | Providing and laying in position (1:2:4) reinforced cement concrete foundation of size 400 mm long x 400 mm wide and 800 mm deep i/c excavation of earth, providing cutting, bending and placing in position reinforcement of cold twisted bar of 12 mm dia 1600 mm long (approx.) -8 Nos. and reinforcement ring of cold twisted bar of 8 mm dia 1800 mm long (approx.)-6 Nos. (with 150 mm spacing) i/c supplying of 4 Nos. M-16 x 450 mm long (100 mm top threaded portion) GI foundation bolt (EN- 8 grade) with 3 Nos. nuts and 2 Nos. washer, bolt along with 2 Nos. templates/ Anchor plate of size 200 mm x 200 mm x 3 mm thick having 4 Nos. suitable mm dia holes to match with PCD of poles base plate with positioning of foundation bolts and providing 63 mm (OD) 2 Nos DWC pipe for cable entry and exit as required. (Drawing to be approved by Engineer in charge.) |
| 27 | SITC of 1800 (W)x2200(H) mm chendelier with minimum 6 watt 72 No. LED lamp as per drawing/image attached i/c connection testing etc. complete as required. |
| 28 | SITC of wall light with minimum 6 watt 2 Nos. LED Lamp as per matching with chendelier described in item no.20 of BOQ.i/c connection testing etc. complete as required. ( Image attached). Please Enable Macros to View BoQ information |