|
| 1 | Item Description |
| 2 | Dismantalling pucca brick or lime work including stacking servicible materials in countable stacks within 16M lead and disposal of unservicible materials with all lead all complete as per building specification & direction of E/I. |
| 3 | Providing designation 75A brick work in C.M (1:4) in superstructure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar joints, costs of screening, materials, scaffolding, raking out joints to 15mm depth curing, taxes & royalty all complete as per building specification & direction of E/I. |
| 4 | Covering of treated surface with PCC :- Providing 50 mm thick Cement Concrete M20(1:1.5:3) maintaining slope in alternate 2 mt x 2 mt panels with aaproved quality of stone chips of 20 mm |
| 5 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I |
| 6 | Prpviding 12mm thick cement plaster (1:4) ……do……do….as per specification & direction of E/I. |
| 7 | Providing PCC M-20 with nominal mix (1:1.5:3) in foundation & plinth with approved quality of stone…..do…do…direction of E/I. |
| 8 | Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600x12 mm . |
| 9 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I. |
| 10 | Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. |
| 11 | Supplying fitting & fixing 20 gauge MS sheet steel gate fitted on MS angle iron frame of size 60x60x6mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C (1:2:4) blocks of required size , applying a priming red lead paint over steel work, taxes etc all complete as per specification & direction of E/I. |
| 12 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 13 | Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 14 | Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.With granite stone of colour black, cherry/ruby red of area less than 0.50 sqm |
| 15 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid[dsr-17.3.1 ] |
| 16 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.[dsr-17.16a] |
| 17 | PROVIDING CPVC PIPE 25MM DIA |
| 18 | PROVIDING CPVC PIPE 32MM DIA |
| 19 | PROVIDING CPVC PIPE 40MM DIA |
| 20 | Wiring for light point /fan point/ exaust fan point / call bell point with 1.5 sqmm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular type switch, modular plat, suitable size G.I. box etc. as required |
| 21 | Supply and fixing of 5/6 A one way Modular Type switch in existing board |
| 22 | Supply and fixing of 5/6 A 3Pin Modular socket in existing board |
| 23 | Supply and fixing of 15/16 A one way Modular Type switch in existing board |
| 24 | Supply and fixing of 15/16 A 3Pin Modular socket in existing board |
| 25 | S/F of Modular Type Fan Regulator |
| 26 | S/F of 6 Module, Modular base & cover plate |
| 27 | Supply and Fixing of 2pin 5 A ceiling Rose |
| 28 | Supply and fixing of PVC /GI box of 4\\"x4\\" |
| 29 | 12 Way SPN , Double door MCB DB |
| 30 | S/F 'C' Series , MCB 50/63 A DP |
| 31 | S/F 'C' Series , MCB 32 A SP |
| 32 | Installation , Testing & commissioning of fluorescent fitting direct on surface |
| 33 | installation , Testing & commissioning of ceiling Fan including wiring the down road |
| 34 | Wiring for ckt / submain wiring with earth wire (2x2.5sqmm + 1x2.5sqmm cu flexible cable) |
| 35 | Supply and drawing of 2 x 16 sqmm Al. Arm. cable for service connection |
| 36 | 1200 mm , 230 Volt Ceiling Fan |
| 37 | 20 /22 W LED Tube light |
| 38 | Supply and fixing of Batten holder |
| 39 | 9 / 10 Watt LED Bulb |
| 40 | 9 \\" (230mm ) Exhaust fan |
| 41 | ITC Exhaust fan upto 450mm sweep inexixting opening |
| 42 | Supply and laying of 6 SWG GI wire |
| 43 | 1.5 tr. 5star split A.C (inverter type ) IS-1391- part-II |
| 44 | Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed c.l. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms., 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/l.[ |
| 45 | Providing and fixing male ended 15 mm dia brass bib cock of approved quality ( wt not less than 350 gms ) with extra socket all complete as per specification and direction of E/l . |
| 46 | Providing and fixing brass / C.I. Stop cock of approved quality all complete as per specification and direction of E/l .A) BRASS STOP COCK(a) 15 mm dia |
| 47 | Providing and fixing brass / C.I. Stop cock of approved quality all complete as per specification and direction of E/l .A) BRASS STOP COCK(b) 20 mm dia |
| 48 | Providing and fixing 15 mm dia and 45 cm. long P. V .C connection pipe with heavy quality brass coupling at both ends etc. all complete as per specification and direction of E/l . |
| 49 | Providing and fixing 15mm size C.P brass pillar cock (Weight not less than 350 gms) C.I body brass spindle pillar cock of approved quality as per spcification and direction of E/l.(b) C.I. body brass spindle |
| 50 | (b) Mirrors of 4 mm thick plate glass bevelled edge mirror including C.P brass revolving fittings, 3 mm plywood board and C P hinges to fix with mirror(1)600x450 mm |
| 51 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised - Rigid PVC rain water pipes confirming to IS : 13592 Type A including jointing with seal ring confirming to IS : 5382 leaving 10mm gap for thermal expansion.Coupler 110 mm dia |
| 52 | Supply of polythene water storage tank of ISI mark.….do… .do…..all complete job |
| 53 | Cost of drilling 200mm x 165mm x 175m deep bore well in all kinds of soil and rock in urban or any other area for installation of pump set with Hydraulic DTH Rig machine ….do …. ….do….. all complete job. |
| 54 | (1) From 0-50 meter |
| 55 | (2) From 51-120 meter onwards |
| 56 | Supplying all tools, tackles & Lowering of 200mm Nominal dia MSERW Casing pipe 6mm thick ….do …. ….do….. all complete job. |
| 57 | Providing and fixing MS 200 mm NB dia UPVC pipe having hole suitable for passing 40mm dia ….do …. ….do….. all complete job. |
| 58 | supplying, installing in to the 200 mm/165mm Nominal dia bore well & commissioning of suitable dia submersible Motor pump set pump capable to discharge 0.75 LPS ….do …. ….do….. all complete job. |
| 59 | Providing and supplying in standard lenghts High density polythene pipe confirming to IS4984/14151/12786/13488 ….do …. ….do….. all complete job. |
| 60 | Supplying, installing & commissioning of panel board suitable for the motor pump set ….do …. ….do….. all complete job. |
| 61 | Cost of PVC insulated copper submersible cable (2.5 sq mm x 3 core) of Finolex or equivalent make including lowering and making water proof joints including all taxes and transportation to work site etc. as per specification and direction of E/I. |
| 62 | Supplying, & commissioning of 5 KVA Servo Stabilizer of Sen & pandit or pagaria or approved eqivalent make (Range 90 V -300 V) single phase ….do …. ….do….. all complete job. |
| 63 | Supplying & commissioning and fitting pre enamlated 3 core 6 sqmm aluminiumservice wire from pole to the panel board ….do …. ….do….. all complete job. |
| 64 | Earthing with copper earth plate 600 X 600 X 3mm thick including ….do …. ….do….. all complete job. |
| 65 | Providing 32mm dia GI elbow confirming IS specifiction ….do …. ….do….. all complete job. |
| 66 | Supply and fixing G.I Reducing teeplain 32mm dia. ….do …. ….do….. all complete job. |
| 67 | Supplying and laying 32mm G.I Pipes (TATA or equivalent) ….do …. ….do….. all complete job. |
| 68 | Carriage of Matrials |
| 69 | Chips |
| 70 | Bricks |
| 71 | Cement |
| 72 | Add GST 18% |
| 73 | Add Labour Cess 1% Please Enable Macros to View BoQ information |