|
| 1 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. |
| 2 | W.C. pan with ISI marked white solid plastic seat and lid |
| 3 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 4 | Orissa pattern W.C. pan of size 580x440 mm |
| 5 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 6 | Providing and fixing 8 mm dia C.P. Jet with flexible tube upto 1 metre long with S.S. triangular plate for E.W.C. |
| 7 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. |
| 8 | 10 litre (full flush) capacity-white |
| 9 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 10 | Flat back wash basin of size 550x400 mm |
| 11 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 12 | Flexible pipe |
| 13 | 40 mm dia |
| 14 | 32 mm dia |
| 15 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Interrnal Work- Exposed on Wall |
| 16 | 15 mm |
| 17 | 20 mm |
| 18 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 19 | 25 mm dia nominal bore |
| 20 | 20 mm dia nominal bore |
| 21 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 22 | 15 mm nominal bore |
| 23 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : |
| 24 | 15 mm nominal bore |
| 25 | 20 mm nominal bore |
| 26 | 25 mm dia nominal bore |
| 27 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 28 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 |
| 29 | 15 mm nominal bore |
| 30 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 31 | 15 mm nominal bore |
| 32 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 33 | Providing and fixing PTMT bib cock of approved quality and colour |
| 34 | 15mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 35 | Providing and fixing PTMT Urinal cock of approved quality |
| 36 | 15 mm nominal bore, 107 mm long, weighing not less than 110 gms |
| 37 | Providing and fixing PTMT, push cock of approved quality |
| 38 | 15 mm nominal bore, 98 mm long, weighing not less than 75 gms |
| 39 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
| 40 | 15 mm nominal bore, 105 mm long, weighing not less than 138 gms |
| 41 | 20 mm nominal bore, 120 mm long, weighing not less than 198 gm |
| 42 | 25 mm nominal bore, 152mm long, weighing not less than 440 gms |
| 43 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, |
| 44 | Providing and fixing of PVC cover for water storage tank cover duly ISI marked of approved make: |
| 45 | 2000 ltr |
| 46 | 500 -1000 ltr. Capacity |
| 47 | Providing and fixing of Seat Cover for EWC of approved make |
| 48 | Providing and fixing of C.P.brass Soap Dish complete in all respects |
| 49 | Providing and fixing of C.P. brass towel ring complete of make Jaquar or equivalent . |
| 50 | Providing and fixing of PVC fitting for L/L cistern Super nova make complete in all respects. |
| 51 | Providing and fixing of PVC handle for L/L cistern complete: |
| 52 | Providing and fixing of PVC Ball cock for L/L cistern/water cooler complete. |
| 53 | Providing and fixing of SS/ CP Grating with / without hole of approved make |
| 54 | Providing and fixing of size 22\\" x 16\\" bevelded edge of superior glass with 6mm thick of approved hard board complete. |
| 55 | Providing and fixing pressmatic Pillar Tap make Jaquar (PRESSMATIC) PRS-031 or equivalent approved make |
| 56 | Providing and fixing of SFRC G.T. cover with frame incl. the cost of carrige of material fixing cc 1.2.4. complete in all respect and to the entire satisfaction of the Engineer-in-Charge. |
| 57 | Providing and fixing of CP waste 32 mm dia for WHB/urinal |
| 58 | Providing and fixing of CP sink waste for Sink |
| 59 | Providing and fixing of SFRC I.C. cover with frame incl. the cost of carrige of material fixing CC 1.2.4. complete in all respect |
| 60 | Providing and fixing of pumping monoblock single phase for boosting of make Crompton/Lubi or equivalent |
| 61 | 2 H.P |
| 62 | 1 H.P |
| 63 | Providing and fixing of white vitreous china ware half stall urinal of size 420x395x635 mm with CP Waste, CP Spreader make Cera or equivalent. |
| 64 | Providing and fixing of PVC Pipe 3\\" dia of 6kg pressure complete in all respect. |
| 65 | Providing and fixing of PVC Pipe 4\\" dia of 6kg pressure complete in all respect. |
| 66 | Providing and fixing of Chinaware Urinal Partition wall make Cera or equivalent Please Enable Macros to View BoQ information |