|
| 1 | Dismantling of Asbestos cement (corrugated or semi corrugated) sheets as in roof covering complete all as specified and directed. |
| 2 | S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour with features a distinct, often decorative, forward projection curve or \\"crimp\\" used for modern architectural looks having tensile strength 550 Mpa as in roof covering /cladding to wall /roof covering fixed with self tapping screw complete all as specified and as directed. |
| 3 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 4 | S&F in repairs 0.56mm thick plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) including fixed with self tapping screws in any surfaces complete all as specified and directetd. |
| 5 | Dismantling of wall,display board /ceiling board fibre ,pulp,insulation etc or insulation board /slab/wool of any thickness including cover fillets complete all as specified and directed. |
| 6 | S&F Anodised aluminium snap grid frame work for false ceiling all as specified and directed with hangers 6mm dia GI (up to 1200mm length) adjusting level fixed to roof slab by means of ceiling cleat of GI flat 40x3mm and 60mm long and expension holed fasteners 12.5mm dia 40mm long complete all as specified and directed. |
| 7 | M&L for 6mm thick non asbestos fibre cement building board fixed in cement ceiling flat or sloping to GI/aluiminium frame work complete all as specified and directed. |
| 8 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 9 | M&L for Vitrified Ceramic tiles light shade double charged glazed 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 10 | All as per item No 9 above but in vertical surfaces as in skirtings, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering or backing coat in cement mortar 1:4 complete all as specified and directed. |
| 11 | M&L for light shade Vitrified Ceramic tiles of 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.48 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 12 | All as per item No 11 above but in vertical surfaces as in skirtings, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering or backing coat in cement mortar 1:3 complete all as specified and directed. |
| 13 | M&L for digital coloured glazed ceramic tiles in vertical surfaces 350 x 250 x 7mm/ 450 x 300 x 7 to 8 mm thick, etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles including 10mm thick backing coat in 1:4 cement mortar complete all as specified and directed. |
| 14 | M&L for Granite (Z Black) 18 to 20 mm thick table rubbed & polished in steps, jambs, cills, shelves, chowkat etc including cutting of holes for fixing WHB in cement mortar 1:4 & pointing with white cement with marble dust using admixture of pigment to match with the shade of granite over and including 15mm thick screed in CM 1:4 complete all as specified and as directed . |
| 15 | S&F Roof trusses (framed) trussed purlines, crane gantries, rails and fastenings and heavy brackets framing (beam, Tee, angle, channel or flat sections)of Fe-410-W(Gde-E-250) quality B including distance pieces, cleats etc complete all as specified and directed. |
| 16 | M&L for Preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide priming complete all as specified and directed. |
| 17 | S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 18 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 19 | Taken down aluminium door and windows with frame and shutters any type complete all as specified and directed. |
| 20 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) includig fixing Glass or wiremesh and all fittings such as handle, hinges etc upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 21 | Taking down PVC chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and directed. |
| 22 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm colour single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 23 | S&F Factory Made Solid PVC Moulded Door Shutter, with wood free EPS 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 24 | Taking down chowkats or frames with shutters any type not exceeding 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and directed. |
| 25 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame minimum 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. including 4.8mm toughtned glass, wire mesh and locking arrangement complete all as specified and directed.Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 26 | Taking down chowkats or frames with shutters any type exceeding 1.5 Sqm and not exceeding 4.0 Sqm each (without taking off shutter from the frame) complete all as specified and directed. |
| 27 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws including all fittings like tower bolt, handle, aldrop and door stopper complete all as specified and directed. (Note: No payment will not be made for fittings of doors etc) |
| 28 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain shutter of 30mm size for glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc, but divided in to square with plain, chamfered or rounded, mitred and rebated sash bar, any number fitted with cut and mitred beads for securing glass etc comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws for fixing including all fittings such as handle, tower bolt hasp staple, hinges, SS wire mesh etc complete all as specified and directed. |
| 29 | M&L for 12mm thick Medium density fibre (MDF) board, exterior grade, fixed to timber frame work with 100% termite proof and waterproof, fixed with screws to timber frame work in kitchen cabinet ,wall hung type, cupboard in any shape complete all as specified and directed. |
| 30 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 31 | M&L for Brickwork with fly ash modudlar bricks, straight or curved on plan exc 6m mean radius, built ins built in cement mortar 1:6 complete all as specified and directed. |
| 32 | Taking down, cement plaster of any description from brick or stone walls etc, including raking out joints, hacking for key scrubbing down with water etc and disposing of the rubbish materials in low lying areas of defence land all as specified and as directed. |
| 33 | M&L for 10mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6 finished fair and even without using extra cement complete all as specified and as directed. |
| 34 | M&L for (10+5)mm thick for rendering fair faces of brick work or Concrete surface in two coats 10mm thick in CM(1:6) as under coat 5mm thick CM (1:4) as finishing coat in two separate layer mixed with Liquid water proofing compound finished even and smooth without using extra cement at any height including necessary scaffolding, ladder, formwork etc complete all as specified and as directed. Note: Water proofing compund shall be measured and paied seperately. |
| 35 | Supply only liquid water proofing chemical. |
| 36 | M&L for applying average 3mm thick waterproof putty on newly plastered surfaces of wall complete all as specified and directed. |
| 37 | M & L for preparing newly plastered surfaces of walls and applying two coats of interior oil based emultion/distemper paint over one coat of acrylic water based interior/exterior grade primer @ 0.8 ltr (undiluted) / 10 Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI (Apex Ultima Luxury enulsion of Asian or equivalent of approvd make as approved by GE) or using smart periodical methodology complete all as specified & directed.Note : Shade and pattern of the colour will be approved by GE. |
| 38 | M & L for preparing newly plastered surfaces of walls and applying two coat of exterio/interior weather shield/weather proof Acrylic exterior emulsion paint (Apex Ultima Luxury enulsion of Asian or equivalent of approvd make as approved by GE) by skilled labour and applying one coat of acrylic water based exterior grade primer @ 0.8 ltr (undiluted) / 10 Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI or using smart periodical methodology complete all as specified & directed.Note : Shade and pattern of the colour will be approved by GE. |
| 39 | M&L for complete removal of existing treatment (Cement Base Paint/White Wash/OBD/Exterior weather paint/Oil paint etc) of external decorative surface from walls, cornices, jambs, cills, parapet wall, pillars etc or any other description by scrapping with mechanical wall sander (having mechanical vacume mechanism) with RPM not less than 1500, sanding pad of 80 grit having dia of 7\\"/9\\" or scrapping with wire brishesto to make the surface free from dust, loose paint, removal of nails etc including fillings depression surfaces, cracks/holes by waterproof putty complete by skilled labour to the entire satisfaction by EIC complete all as specified and directed. |
| 40 | M&L for preparation of external old decorative surfaces of walls and applying two coat of weather shield/waterproof Acrylic exterior emulsion paint (Apex Ultima Luxury enulsion of Asian or equivalent of approvd make as approved by GE) by skilled labour and applying one coat of acrylic water based exterior grade primer @ 0.8 ltr (undiluted) / 10 Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats including filling cracks with wall care putty wherever necessary complete all as specified and directed. Note : Colour and shade as per new colour scheme approved by GE. |
| 41 | M & L for preparing of old decorative any interior surface of walls and applying priming paint followed by one coat of internal emulsion paint, anti-fungal and anti-bacterial (Asian- Royale or equivalent of approved make as approved by GE) on wall surfaces using airless spray technology with max working presssure of 3300PSI and capable to operating single spray gun with max material whole length of 30mtr. The spray machine should be reported manufacturer with pro-gaurd technology and capability of tracking pressure and paint uses and certified by paint manufacturer and accesosries to be able to spray in hard to reach areas penetration of paint on the surface by smart periodical methodology/auto roller, complete in all respect as specified and directed. |
| 42 | Taking up or down 15mm dia bore GI tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 43 | Taking up or down 25mm dia bore GI tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 44 | S&F 15mm dia bore GI tubing medium grade, galvanised with all fittings fixed to wall and ceiling or laid in floors complete all as specified and directed. |
| 45 | S&F 25mm dia bore GI tubing medium grade, galvanised with all fittings fixed to wall and ceiling or laid in floors complete all as specified and directed. |
| 46 | S&F One piece EWCs with seat cover and twin flush fittings piece, floor standing of size 660x350x745mm /620x360x720mm/ 675x360x765 mm of snow white in colour with 220mm S trap, square design, crafted with soft corner or quick & easy cleaning, clean, sleek & seamless look including slim soft close seat cover and other connected accessories complete all as specified and directed. Make:- CERA (CURA-6D) Cat No. S1013230, Cat. No. S1013106, Cat. No. S1013237, Hindware Cat No 92595 (S-22) or equivalent. |
| 47 | S&F in repairs vitreous china table top wash hand basin snow white in square or rectangular in shape of size 605x395x120mm/560x360x130mm including Waste coupling (CERA Cat No 8050351CH) with ceramic pop-up push type (full thread) 32 mm and other end fixed and Pillar cock with swan neck spout (left/right) and aerato (CERA Cat No F2002104 (Left)) 15 mm bore cast copper alloy fancy type chromium plated screwed down high pressure with screwed and removing debris out of MoD land all as specified and directed. Make : CERA Cat Part No S2020141 (CERA (Ceona), S2020176. Hindware Cat No : 91207, 91101 or equivalent. |
| 48 | S&F PVC(SWR) 110mm dia S trap including connecting to out let with solvent cement complete all as specified and directed. |
| 49 | S&F in repairs decorative mild steel coloured curtain rod of 20 mm dia powder coated approved pattern & design including side cups & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs complete all as specified and directed. |
| 50 | S&F in repairs 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20mm - 210 gms/25mm-455gms/40mm - 690 gms) complete all as specified and directed. |
| 51 | S&F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 52 | Dismantling water tanks of capacity exc 500ltrs but n.exc 1000ltrs complete all as specified and directed. |
| 53 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), of capacity 1000ltrs hoisted and fixed in position complete all as specified and directed in SSR Part I |
| 54 | Material and labour for grinding and polishing (mirror finished) on existing kota stone/ marble stone work where ever required to give high gloss finish including repair/ replacement of broken kota stone/marble stone complete all as specified and diected. |
| 55 | Demolition of reinforced cement concrete and paving not exceeding 15 cm thickness (other than ground floors) for roofs, floors, beams, staircase, landing, chajjas and similar suspended work (reinforced cut as required to facilitate demolition) including disposing of debris off the premises complete all as specified and directed. |
| 56 | S&F in repair 15mm bore brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 57 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed. |
| 58 | S&F 4.00 mm thick sheet glass selected quality and glazing in squares not exceeding 0.50 sqm in each pane of aluminium door / window complete all as specified and directed. |
| 59 | Taking down copper /aluminium point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed. |
| 60 | Taking down old unserviceable distribution board by disconnection of electric connection carefully SPN DBs/ TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 61 | Taking down carefully copper/aluminium sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 62 | Taking down existing geyser of any capacity after disconnecting all necessary electrical and water connections and deposit to MES store yard of AGE E/M complete all as specified and directed. |
| 63 | Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M complete all as specified and directed. |
| 64 | M & L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade IS-694 marked drawn through in and including heavy duty grade (ISI marked) PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the One light point controlled by one, one way switch 5 Amps |
| 65 | All as per Item No 64 above but One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator complete all as specified and directed. |
| 66 | All as per Item No 64 above but One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and directed. |
| 67 | All as per item No 64 above but One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and directed. |
| 68 | All as per Item No 64 above but One bell point controlled by one, bell switch 5 Amps complete all as specified and directed. |
| 69 | All as per item No 64 above but using 2.5 sqmm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 2.5 sqmm copper conductor FRLS PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and directed. |
| 70 | All as per item No. 64 above but using 4.0 sqmm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 4.0 sqmm FRLS PVC insulated copper conductor cable as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC Point) complete all as specified and directed. |
| 71 | S & F modular switch piano flush type, single pole, one way, 5/6 Amp single module complete all as specified and directed. |
| 72 | S & F modular switch piano flush type, single pole, one way, 15/16 Amp single module complete all as specified and directed. |
| 73 | S & F modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed. |
| 74 | S & F modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed. |
| 75 | S & F modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 76 | S & F bell push modular 6 Amps single module complete all as specified and directed. |
| 77 | S & F ceiling rose, surface bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and directed. |
| 78 | S & F bell electric ding dong type suitable for operation on 230 volt 50 Hz AC supply complete all as specified and as directed |
| 79 | M & L for sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable, one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit |
| 80 | S & F sheet metal enclosure MCB DB TPN 4 way vertical type with 200 Amps rated bus bar 415 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed. |
| 81 | S & F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed. |
| 82 | S & F MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 83 | S & F MCB single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 84 | S & F MCB single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 85 | S & F water heater storage type (Geyser) vertical type with inner container of capacity 25 ltrs, electrically operated, AC 230 Volts, BEE 5 star rated, ISI marked including 04 Nos of hold fashner nuts of suitable size fixed in brick wall including saftey valve, thermostate, NRV, SS connection pipe hot & cold complete all as specified and directed |
| 86 | S & F ceiling fan 230V, 50 Hz AC, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as specified and directed. |
| 87 | S & F exhaust fan, steel body AC single phase 230 Volts of size 300mm sweep with, blades, frame and louvers with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 0.75 Sqmm three core from ceiling rose to exhaust fan for connection complete all as specified and directed. |
| 88 | S & F decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provision of LED bulb 10 watts complete all as specified and directed. |
| 89 | S & F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of size 0.75 sqmm complete all as specified and directed. |
| 90 | S & F LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of size 0.75 Sqmm from ceiling rose to fitting complete all as specified and as directed. |
| 91 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of size 0.75 Sqmm complete all as specified and directed. |
| 92 | S & F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection and necessary mounting arrangements alongwith provision of 0.75 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including suitable dia GI pipe medium grade bracket 0.75 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed. |
| 93 | Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance. Please Enable Macros to View BoQ information |