|
| 1 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified & directed. |
| 2 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified & directed. |
| 3 | Taking down shutters of any description.exc 1 Sqm and n.exc 2 sqm each & refixing in same opening after replacement of unserviceable door frame, complete all as directed |
| 4 | Taking down only chowkhats or frame area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified & directed. |
| 5 | Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specified & directed |
| 6 | M&L for 2nd class hard wood, plain straight chowkats & frame wrought rounded or chamfered put together with glue pinned at joints and fixed complete all as specified and directed. |
| 7 | S&F, in repairs, for part of door chowhats with 2nd class hard wood plain straight chowkats & frame wrought rounded or chamfered put together with glue pinned at joints, matching with exiting frame including cutting of damaged portion of chowkhat or frame & taking out/ remoal from site complete all as specified and directed. |
| 8 | S&F Mild steel works as in bands, straps, hold fast, wind ties, angle cleats and similar small articles etc conforming to Fe-290 Gde E-165 complete all as directed. |
| 9 | S&F Anodised aluminium powder coating of any colour (Thickness or powder coating not less than 50 micron) for window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified and directed. |
| 10 | S&F, in repairs, Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, galvanized wire of staples complete all as specified & directed |
| 11 | S&F 4 mm thick sheet glass ordinary quality coloured/tinted/ground or obscured or frosted, on one side and glazed in squares glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified (upto 3rd storey with necessary scaffolding), all as specified. |
| 12 | S&F 35mm thick Ist class H.W. (Teak wood) plain framed panelled shutters (any number of panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both face, size of rails and stiles as per IS 1003 (part-I) kiln seasoned and chemical pressure treated complete all as specified and directed |
| 13 | 35mm thick Ist class H.W. (Teak wood) glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc(with sash bars) divided into squars, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed |
| 14 | M&L, in repairs, for 2nd class hard wood wrought plain fillets, bullnosed,splayed, chamfered or rounded, sectional area exc 3 Sq cm & not exc 6 Sq cm , secured with nails or brads, fixed in repair, Preparation of new or previously untreated wooden surfaces of any description, not exc. 10cm width or girth when connected with other painting or when painted in different tint and apply two coats of synthetic enamel paint over a coat of pink primer, complete all as specified & directed. |
| 15 | S& F Factory made 30 mm thick single extruded WPC (Wood Polymer Composite) solid Moulded Flush Door Shutter Spray Painted with solvent based colour of required size with 2.4 or 6 rised panel design on front side with 10mm deep mould on single side with grain texture of comprising of virgin polymer of 'K' value 57-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately |
| 16 | S& F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window& other frames/ chowkhats of size 50 x 75mm comprising of virginPVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheathusk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headedSS screwshaving minimum frame density of 750 kg/cun, screwwithdrawn strength of 2200N (face)&1100N (edge), minimum compressive strength 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant 152 Section 8 and fixed in position with and including MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete all as per direction of Engineer-In-Charge. |
| 17 | S& F, Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube & edges will be painted to match with printed sheets complete all as specified and directed. |
| 18 | S& F, Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails ms frame shall be covered with heat moulded plain colour PVC \\"C\\" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 etc complete all as directed |
| 19 | S&F, in repairs, Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, galvanized wire of staples complete all as specified & directed |
| 20 | S&F 12mm thick Gypsum board as in false ceiling fixed in repairs with screws in existing GI channels frame work as per manufacturers instructions including suspender and two coats of oil emulsion distemper over primer on new ceiling boards, all as specified and directed. |
| 21 | S&F, Butt hinges mdeium weight conforming to IS : 12817 : 2013, 100mm long, of stainless steel complete all as directed |
| 22 | S&F, 150mm long stainless steel handle complete all as directed. |
| 23 | S&F, 200mm long stainless steel barrel tower bolt complete all as directed. |
| 24 | S&F, 250mm long stainless steel sliding door bolt with hasp staple (bolt type) and fixing clips etc complete all as directed. |
| 25 | Hacking out old broken glass pane of any thickness and size from wooden/metal frame including punching or drilling and glazing pins etc and supply & fix 3.00mm thick sheet glassplain or pinheaded/ frosted of any type & glazing with wooden beads or with oil putty, in squares not exc 0.5 Sqm in each pane, all complete as directed. |
| 26 | M&L, in repairs, for replacement of old damaged rubber beading of glass of any thicness in existing aluminium glazed frames/ windows at stair cases upto 14 metres height including aluminium cleats, provn of scaffolding, ladders and safety precautions etc all complete as necessary and as directed. |
| 27 | S&F, Non anodised aluminium rectangular hollow sections for frame work of cup boards/ showcases, wall panelling grid, to be placed at suitable distances as per site requirementfixed with machine screws including rawel plugs, clamps etc, including taking down old unserviceable wooden filletsin frame, all as specified and directed. |
| 28 | M&L, 9mm thick plywood 5ply grade BWP, type BB, fixed with screws to aluminium frame work as in wall panelling including taking down damaged boards/ plywood with frame wall panelling including fillets complete all as specified & directed. |
| 29 | M&L 4mm thick, 3ply Veneered decorative plywood grade 1 (with BWR resin) with decorative face veeners on one face, fixed on plywood with best quality adhesive approved by GE, |
| 30 | M&L 2nd class hard wood fillets decorative, bullnosed, spalyed, chamfered or rounded on one edge or face sectional area not exc 3 Sqcm, fixed with nails, complete all as specified and directed. |
| 31 | S&F, in repairs, Solid PVC wall lining consisting of 5mm thick wood grains printed colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing in SSR including taking down damaged boards/ plywood and fillets, as directed. |
| 32 | S&F, in repairs, PVC fillets of width 35mm and 5mm thick PVC sheet for frame of wall panelling inclusive of fixing on wall to make PVC frame with screws as as per specifications and drawing in SSR all as directed. |
| 33 | S&F, 18mm thick colour prelaminated WPC board , minimum density 600 kg/cum, fixed to timber frame work as in drawers, bath cabinet, cup board, show case, shelves, pelmet box and similar items including taking down damaged boards/ plywood fixed in repair complete all as directed. |
| 34 | S&F, 12mm thick white colour prelaminated WPC board , minimum density 600 kg/cum, fixed to bottom in drawers or any other similar work, fixed in repair complete all as directed. |
| 35 | S & F in repairs, stain less heavy duty steel telesopic channel of 450mm to 500mm size , fixed to drawer including necessary repair, complete all as specified and directed of approved make. |
| 36 | S&F, Edge beading tape 0.50mm thick for exposed edges of WPC boards or similar works width 10 cm to 30 cm all as specified and directed. |
| 37 | S&F, in repairs, Continuous (Piano) hinges, mild steel, bright finished or electro galvanised, width of flap 30mm (when open), complete all as directed. |
| 38 | S&F, in repairs, stainless steel bow handle 100mm size with machine screw fixed in cup boards, drawers etc all as directed. |
| 39 | S&F, in repairs, Looking mirror 5.0mm thick area 0.50 Sqm to 1.00 Sqm bevelled edge of selected quality glass mounted on 6mm thick commercial plywood and fixed to PVC rawel plugs with chromium plated brass screw and cup washers and surrounded with aluminium angle frame including taking down existing unserviceable mirror , complete all as specified and directed. |
| 40 | S&F, in repairs, Looking mirror 5.0mm thick area not exc. 0.60 Sqm, bevelled edge of selected quality glass, fixed to cup boards with chromium plated brass screw and cup washers and surrounded with wooden beading frame including taking down existing unserviceable mirror, complete all as specified and directed. |
| 41 | S&F, Stainless steel curtain rod 20mm inner dia 1.0 mm thick of SS heavy duty conduit pipe grade -304 , complete. Including taking down of existing rod, complete all as specified and directed. |
| 42 | S&F, Stainless steel decorative finials and end wall bracket of approved quality for 20mm dia curtain rod , complete. Including taking down of existing finals or end brackets, complete all as specified and directed. |
| 43 | S&F, Stainless steel heavy duty supporting brackets of approved quality suitable for curtain rod, complete. Including taking down of existing brackets, make good surfaces of wall after fixing, complete all as specified and directed. |
| 44 | S&F, in repair, stainless steel heavy duty hanging rod 20mm dia for cup boards of suitable size including 2 Nos end brackets , complete all as directed. |
| 45 | Repairs to Aluminium door for replacement of pivot for glazed aluminium door as per sample including taking down existing glazed aluminium door shutter/frame less glass door shutter n. exc 4.00 Sqm and refixing in the same position after fixing of pivot and all other repair complete all as specified and directed. |
| 46 | S&F, in repair, heavy duty double action floor spring hydraulically regulated made up of min 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel, complete all as specified & directed. |
| 47 | S&F, 12mm thick toughened glass frameless doors including cutting, polishing and bevelling all around and making holes for fixing of handles, Stainless steel locking arrangement with duplicate keys including removing old broken glass doors complete all as directed |
| 48 | S&F, 300 mm long stainless steel handle of grade 304 fixed to glass door all as specified & directed. |
| 49 | S&F, Factory made Cupboard of 18mm thick with coloured prelaminated WPC board in exposed faces and white coloured 18mm thick WPC boards in internal surfaces,shelves etc, consisting of one drawer,two shoe racks with stainless steel louvers of 100X100mm size on both shutters, three shelves and one drawer withlocks and a pair of stainless steel chanel 450mm, handles, 20mm dia heav duty SS cloth hanging rod including end brackets, fixing with 100mm long fasteners (12 Nos Minimum), one looking mirror 5mm thick of size 400mm X 1100mm fixed on surace of singlre leaf shutter of cupboard with WPC beading & PVC angle / edge bend tap of suitable size & matching colour, make good the existing surfaces with cement mortar (1:4) to get the size of cubical portion for cupboard of specified size etc all complete as per specifications and drawing No. GE IMA/ 156/ 2022, Sheet No. 1/1, Back side of cupboard shall be provided with 12mm thick WPC board as approved by GE. Note :- (1). Over all size of cup board Width- 1.85mtr , Height- 2.00Mtr, Depth- 0.60Mtr and these dimensions may vary 50mm Plus or Minus as per site requirement due existing constructional aspects. (2). All sizes of shelves, drawers, shoe racks etc may varry as per site requirement except a maximum variation of 50mm in over all size only. (3) Stainless steel Chanel for drawer shall be of capacity to sustain 25 Kg weight. Make :- Hettich or as approved by GE. (4). All fittings like Handles of diffirent sizes , Piano hinged 36mm wide on opening, heavy duty 22mm dia hanger rod with brackets shall beof stainless steel. (5). Any missing specifications or dimensions shall be as per site requirement and as per final direction of Engr-in-Charge will be applicable. |
| 50 | Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar(1:6) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed. |
| 51 | M&L FOR Brick work with sub class 'B' bricks (old size), straight or curved on plan to any radius built in cement mortar (1:4) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed. |
| 52 | M&L, for Rendering 12 mm thick on new brick or concrete surface mixed with WPC as per manufacturers instructions, surfaces finished even and smooth without using extra cement complete all as specified and directed. ( Note :- WPC shall be paid separately if directed) |
| 53 | M&L, for Rendering 12 mm thick on brick or concrete surface with WPC as per manufacturers instructions, surfaces finished even and smooth without using extra cement complete including taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water all as specified and directed. ( Note :- WPC shall be measured and paid for separetely) |
| 54 | M&L, Rendering 5 mm thick on ceiling, soffit of roof projectin and chhajjas of concrete surface finish even and smooth without using extra cement complete including taking down existing cement plaster on concrete surfaces all as specified and directed. |
| 55 | Supply only liquid water proofing compound complete all as specified & directed. |
| 56 | M&L for PCC 1: 3 : 6 type C1 (using 20 mm graded aggregates) in surface channels and drains including necessary use & waste of formwork and demolition of existing old cement concrete of any description complete all as specified and directed. |
| 57 | Extra for forming fair finished drain or channel upto 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 58 | M&L for 75 mm thick PCC 1;3:6 type C-2 using 40mm graded stone aggregate as in plinth protection or paving in similar places and finishing the surface even & smooth with out using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meter and every change of direction and filling the same with mixture of bitumen & sand in ratio (1:1) by weight including necessary form work etc and including demolition of existing old cement concrete, complete all as specified and directed. |
| 59 | M&L, for Repairs to existing floor and wall tile joints in toilets and filling the joints with epoxy based tile grout to make the surfaces leak proof, complete all as specified and as directed. |
| 60 | M&L, For repairs to existing floor traps in toilets, filling all around the floor trap with cement mortar 1:2 including replacement of adjecent tites and CP grating of floor trap including taking down existing tile etc all complete as specified and as directed. |
| 61 | M&L, for Repairs to existing brick pattern tiles as in wall cladding, in patches, area not exceeding 0.50 Sqm each patch and filling the surface with cement mortar, rendering to required thickness in cement mortar with fair finished surfaces, to match the existing brick pattern tiles with necessary groove cutting including applying two coat of exterior emulsion paint (weather coat) over a coat of primer to match the existing shade with adjecent surfaces, upto 14 metres height including all necessary scaffolding, safety precautions etc complete all as specified and directed. |
| 62 | Taking down existing brick pattern tiles of size 200 x 58mm x15mm as in wall cladding and filling the surface with rendering of required thickness in cement mortar 1:4 to match the existing brick pattern tiles with necessary groove cutting including applying two coats of exterior emulsion paint (weather coat) over a coat of primer to match the of existing shade, work at height upto 15 metre, including all necessary scaffolding, complete all as specified and directed. |
| 63 | M&L PCC 1:2:4 , type B-I ( using 20mm crushed stone aggt)as in bed plate, cill, steps, coping or similar bands kerb etc complete all as specified and directed |
| 64 | M&L for Repairs to door and window jambs in patches not exc 1.00 Sqm each patch witth glazed ceramic coloured tiles 6 to 7mm thick for matchig shade to existing wall tiles, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including necessary rendering in cement mortar 1:4 finished including dismantling of existing damaged wall tiling duly cutting in proper shape,cleaning surfaces and rubbish off the premises complete all as directed. |
| 65 | M&L, for Glazed ceramic coloured tiles of size 300 mm x 450mm x 6 to 7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed. |
| 66 | M&L, for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.07 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in cement mortar 1:6, complete including dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed. |
| 67 | M&L for 25mm thick plain cement concrete 1:2:4 , type B-0 ( using 12.5 mm graded crussed stone aggregate) as levelling course in sub floors below tile etc complete all as specified and directed. |
| 68 | M&L, for Vitrified ceramic tiles of premium quality of Gruoup B I (a) light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed. |
| 69 | M&L for PCC 1;4;8 type D-2, (using 40 mm graded stone agg) as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed |
| 70 | M&L for machine cut kota stone slab flooring 18-20mm thick laid over 20mm thick cement sand screed cement mortar 1:6 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and rubbing and mirror polishing including dismantling of existing tiling and cement mortar bedding (but not backing) and rubbish off the premises complete all as directed. |
| 71 | M & L for Kota stone slab 10-12 mm thick in riser of steps, skirting, dado and pillar laid on backing coat of 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing, including dismantling of existing tiling and cement mortar bedding (but not backing) and rubbish off the premises complete all as directed. |
| 72 | M&L, for Rubberised polished precast coloured cement concrete glossy finished Interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed. |
| 73 | Dismantling of existing depressed/sunk interlocking paver block of any thickness and shape, supply & spreading a layer of sand of required thickness and refixing the block in matching level of near by surface complete all as specified & directed. |
| 74 | M&L for rubberised polished Glossy finish, chequered cement concrete coloured tiles 30 cm X 30cm X 25 mm thick, set, jointed & pointed in neat cement slurry in floor with grey cement & pigment to match the surface of tiles over & including 15 mm thick screed bed in CM 1:6 complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed. |
| 75 | M&L for granite stone of any colour (of any type) 18- 20mm thick machine cut (table rubbed & polished), as in floors, cooking platforms , skirting and like bedded with and including 15 mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry, and pointed with white with admixture of pigment to match with shade of granite stone including dismantling of existing stone slabs including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed. |
| 76 | Cutting marble platform for inserting/fixing oval type WHB under marble platform including grinding, polishing and taking down and refixing the WHB complete all as directed. |
| 77 | M&L for marble work 15-18mm thick of any colour or shade (of any type) work (table rubbed & polished) in floors, steps, cup board shelves and like with & including 20 mm thick screed bed in cement mortar (1:6) and jointed with grey cement slurry pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade marble including dismantling of existing stone slabs including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed. |
| 78 | M&L, for Factory made Precast heavy duty RCC drain cover 90mm thick with using 10mm dia reinforcement TMT bar 150mm c/c both ways including 1.00mm thick MS black sheet frame on edges with two coats of antecorresive paint over primer all complete, as specified and directed. |
| 79 | M&L for Pre-cast RCC 35 mm thick 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in louvers and jallies set in cement motar 1:4 including all mouldings including dismantling existing RCC Jali , in patch works, complete all as specified and directed. |
| 80 | Cutting and grinding of existing terrazzo floor/ marble floor/ Kota stone floor surfaces (2 cut) on horizontal & vertical surface and finally finishing the surfaces uniformally by applying floor polish complete all as directed. |
| 81 | Dismantling carefully and taken out cracked/ broken marble slabs in steps, floors not exc. 0.50 sqm ecah patch including material & lobour for prepolished marble slab 20-25mm thick of any colour (of any type) matching with existing colour of marble slab including 15mm thick screed bed in cement mortar (1:4) and jointed with grey cement slurry pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade marble, including moulding / rounding of exposed edge of slab, complete all as directed. |
| 82 | S&F, in repairs, 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed. |
| 83 | S&F, in repairs, 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed. |
| 84 | Supply & fixed, in repair, Chromium plated Angle valve 15mm dia (angle cock) cast copper alloys complete all as directed. |
| 85 | Supply & fixed, in repair, Chromium plated brass hot & cold basin mixer with centre hole for WHB and long shank fancy type 15mm bore fixed in repair complete all as directed. Make: Cera (Fountain Series-F2013461) and equvalent in Jaquar ( Florentine Series -FLR 5167NB), Kerovit ( Nucleus - KB 111025) as approved by GE. |
| 86 | Supply & fixed, in repair, Chromium plated Wall Mixer with Bend Pipe for connection to Overhead Shower (with Bush & Piston Diverter Fitting) with Aerator, connecting legs & wall flange etc 15mm bore fixed in repair complete all as directed. Make Cera (Victor Series) and equvalent in Jaquar, Hindware, Kerovit etc |
| 87 | Supply & fixed, in repair, PVC connections 15mm size with brass/ PVC nut both side of length 450mm complete all as directed. |
| 88 | Supply & fixed, in repair, PVC connections 15mm size with brass/ PVC nut both side of length 600mm complete all as directed. |
| 89 | Supply & fixed, in repair, 15mm bore short body bib tap chromium plated with wall flange and aerator complete all as specified and directed. Make- Cera (Victor Series) and equvalent in Jaquar, Hindware, Kerovit etc |
| 90 | Supply & fixed, in repair, Two way chromium plated angle cock 15mm dia with wall flange fixed in repair complete all as directed Make: Cera ( Vivana SeriesF2014211) and equvalent in Jaquar, Hindware, Kerovit etc |
| 91 | S&F, in repairs, CP Health Faucet with 1 M. long flexible tube chrome braided with wall hook Make- Cera cat part No. F 8030111AB or Jaquar Cat No. ALD 587, Kajaria Kerovit CAT No. KA580020 |
| 92 | Supply & fixed, in repair, Overhead shower round shape 100mm dia single flow (ABS body chrome plated with grey face plate) with revolving joints (with body rotation) & 115 mm long shower arm fixed in repair complete all as directed. Make: ESSCO (Jaquar) Cat No. EOS-542N or Cera cat No. F7010213AB Or Hindware Cat No.F160034. |
| 93 | Supply & Fix, in repairs, Brass spindle of any type or size suitable forfor repairing of leaked existing bib cock, angle cock, wall mixture, WHB mixture etc for refixing old fittings , complete all as directed. |
| 94 | Supply & Fix, in repairs, Chromium plated brass knob for wash hand basin, wall mixture, bib cock and angle cock as per site requirement with nut & washer as approved for refixing old fittings, complete all as directed. |
| 95 | S&F, in repairs, Chromium plated towel rail 600mm size fixed in repair complete all as directed.Make: Cera Meridian (SS 304) Cat No. F5015103C4, Jaquar Continental Cat No. ACN 1111SM, Kajaria Kerovit Cat No. KA 930001 |
| 96 | S&F, in repairs, Chromium Plated steel soap dish fixed in repair complete all as directed Make: Cera Meridian ( SS 304) Cat No. F5015160C, Jaquar Continental Cat No. ACN 1131N, Kajaria Kerovit Cat No. KA 930003 |
| 97 | S&F, in repairs, Chromium Plated steel toilet paper holder fixed in repair complete all as directed. Make: Cera Meridian(SS 304) Cat No. F5015110C4,Jaquar Continental Cat No. ACN 1153S, Kajaria Kerovit Cat No. KA 980009 |
| 98 | S&F, in repair, Vitreous china WHB Star white oval type counter top WHB 63 x 50 cm fixed in repair complete all as directed. |
| 99 | S&F, in repair, Chromium plated waste coupling with fly nuts 32mm dia suitable for wash hand basin complete all as directed |
| 100 | Supply and fixed in repair PVC waste pipe 32 MM dia suitable for wash hand basin as approved. |
| 101 | S&F in repair vitreous china wash down water closet pan (padestal pattern), white including plastic water closet seat cover, white, closed pattern flat bottom and mild steel chromium plated or aluminised hinging device. |
| 102 | S&F, in repair, PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as directed. |
| 103 | S&F, plastic water closet seat cover, white, closed pattern flat bottom and mild steel chromium plated or aluminised hinging device, fixed in repair, complete all as directed. |
| 104 | S&F, in repair, 100mm dia chromium plated grating with/without hole fixed in repair complete all as directed. |
| 105 | S&F, in repair, Ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms fixed in repair complete all as directed. |
| 106 | S&F, in repair, 25mm bore gun metal globe/gate valves, with iron wheel head, screwed both ends for iron/GI pipe fixed in repair complete all as directed. |
| 107 | S&F for 75mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, including dismantling of existing cast iron or reinforced concrete drain pipes, complete all as specified and directed |
| 108 | S&F, in repair, for Cast iron 75mm diameter of outlet floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregate) complete all as specified and directed |
| 109 | S&F, in repair, for cast iron fittings as bends, Tee, branch piece etc (any radius) 75mm pipe, diminishing pieces of tapers (large bore measured), fixed to wall or floors, complete all as specified and directed. |
| 110 | Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes, exc 250 ltr n.exc 500 ltr capacity including washing with bleaching powder etc complete all as directed. |
| 111 | Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes, exc 500 ltr but n.exc 1000 ltr capacity including washing with bleaching powder etc complete all as directed. |
| 112 | Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes, exc 1000 ltr n.exc 2000 ltr capacity including washing with bleaching powder etc complete all as directed. |
| 113 | S&F, in repair, 1000 ltr capacity Rotational moulded polythylene water storage tanks three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I including dismantling/ taking out of old water tank & removing to where directed complete all as specified and as directed. |
| 114 | S&F, in repair, PVC lid for PVC water tank with hinging device and locking arrangement for capacity upto 2000 ltr with necessary nuts, bolts and washer etc fixed in repair complete all as directed. |
| 115 | M& L for anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron |
| 116 | M&L for at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same, complete all as specified and directed. |
| 117 | M& L for anti termite treatment along the joint of internal wall and floor in rooms, toilets, balcony etc below tiled or concrete floor, drilling holes at 150mm centre to centre using chemical emulsion @ 1.00 litre per hole including plugging holes with coloured cement to match the existing surfacesof floors. Note :- Item No 115 to 117 : ATT work shall be carried out by a License holder agency approved in MES. |
| 118 | Complete removing of existing treatment from wall / ceilling complete all as specified and directed.Note : Work will be carried out upto triple storied buildings. |
| 119 | M&L, for Preparation of newly plastered or scrapped surfaces of wall/ ceiling by making free from dampness, oil or any loosely held particles, filling cracks if any with crack seal and applying a coat of Dampstop Advanced of Berger or equivalenet of Sika/ Asian Paint/ Fosroc on saturated dry surface of wall as per manufacturer instruction complete all as specified and directed. |
| 120 | M&L for Preparation of plastered or scrapped surface of wall / ceiling and applying 1.5mm thick damp proof wall care putty in two coats, as per manufacturer instruction complete all as specified and directed. |
| 121 | M&L for Preparation of puttyied surfaces of wall/ceiling and applying two coats of oil emulsion distemper over one coat of primer as per manufacture insturctions and as directd by Enginer-in-Charge complete all as specified and directed. |
| 122 | M&L for preparation of new or previously untreated wooden surfaces over 10 cm width or girth including rubbing with sand paper of different sizes, filler coat, including filling thinner with fine cloth and spirit lak dana polishing two or more coats up to desired finishing as directed by GE |
| 123 | M&L for preparation of old treated wooden surfaces over 10 cm width or girth including rubbing with sand paper of different sizes including filling thinner with fine cloth to prepare surface and applying one or more coats of french polishing up to desired finishing as directed by GE. |
| 124 | M&L for Preparation of old plastered/un-plastered surfaces of ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices etc and applying one coat of oil emulsion distemper on ceiling complete all as specified and directed. |
| 125 | M&L for preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls complete all as specified and directed |
| 126 | M&L for preparation of old plastered/un-plastered surfaces of ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices etc and applying one coat of white wash on ceiling complete all as specified and directed. |
| 127 | M&L for preparation of old plastered/un-plastered surfaces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices, pillar etc and applying one coat of white wash on walls complete all as specified and directed. |
| 128 | M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed |
| 129 | M&L for preparation of old painted wooden surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed |
| 130 | M&L for preparation of new plastered/unplastered surfaces of wall and applying two coats of weather exterior emulsion paint (Apex paint of Asian Paint / Weather proof of berger) including one coat of exterior primer on walls complete all as directed. |
| 131 | M&L for preparation of old plastered/unplastered surfaces of wall and applying one coat of weather exterior emulsion paint (Apex paint of Asian Paint / Weather proof of berger) on walls complete all as directed. Note : Work will be carried out upto triple storied buildings. Please Enable Macros to View BoQ information |