|
| 1 | M&L for Surface dressing n exc 15 cm deep in Hard / dense Soil all as specified and directed. |
| 2 | Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation ,shafts wells etc n exc 10 sqm on plan and getting out in hard/ dense Soil complete all as specified and directed. |
| 3 | M & L for pre-construction ATT for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with back fill to be measured) complete all as specified and directed. |
| 4 | M&L for pre-construction ATT for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed. |
| 5 | M&L for pre-construction ATT for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre ofsurface area complete all as specified and directed. |
| 6 | M&L Type D-2 1:4:8 ( 40 mm Aggregate) Cement concrete in foundations, filling and mass concrete complete all as specified and directed. |
| 7 | M&L for High Strength deformed TMT bars 10 mm dia and over, cut to length, bent to shape reqiured including carncking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed. |
| 8 | M&L for High Strength deformed TMT bars 5 mm dia and over upto and including 10 mm dia stirrups, spacers and binders, cut to length, bent to shape reqiured including carncking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed. |
| 9 | Use and waste of formwork for foundations, footing, bases of cloumns and plinth beam etc. for flat rough finished surfaces of concrete complete all as specified and directed. |
| 10 | Use and Waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.flat rough finished surfaces of concrete complete all as specified and directed. |
| 11 | Use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions flat rough finished surfaces of concrete complete all as specified and directed. |
| 12 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed. |
| 13 | M&L for RCC M-25 (nominal mix) using 20 mm garded stone aggregate as Foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 14 | M&L for RCC M-25 M-25 (nominal mix) using 20 mm garded stone aggregate as in columns complete all as specified and directed. |
| 15 | M&L for RCC M-25 M-25 nominal mix) using 20 mm garded stone aggregate as in Roof beams and Tie beam complete all as specified and directed. |
| 16 | M&L for RCC M-25 (nominal mix) using 20 mm garded stone aggregate as in chajja and slab complete all as specified and directed. |
| 17 | M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:4) all as specified. |
| 18 | M&L Rendering 15mm thick in cement mortar 1:6 on INTERNAL fair faces or brick walls or on concrete surfaces plastered surfaces finished even and smooth without using extra cement complete all as specified and directed |
| 19 | M&L Rendering 15mm thick in cement mortar 1:4 on EXERNAL WALL fair faces or brick walls or on concrete surfaces plastered surfaces finished even and smooth without using extra cement complete all as specified and directed |
| 20 | Supply only Integral water proofing compound |
| 21 | S&F framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes framed guard bars railing and similar works conforming to Fe 290. Gde-E165 complete all as specified and directed. |
| 22 | S&F Joist,channel,angle or tee sections,fixed independently ,without connecting plates,etc (cut to ordinary lengths i.e within 20 mm of the length indicated) Fe 410-W (Gde E-250 quality -A) complete all as specified and as directed. |
| 23 | S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410 W (Grade E-250) quality A all as specified and directed. |
| 24 | M&L Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed. |
| 25 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instruction and as directed. |
| 26 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing all as specified and as directed. |
| 27 | M & L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces Make :- Asian Apex Ultima,berger weather coat long life flexo |
| 28 | M&L preparation of newly plastered wall surfaces and applying two coats of OBD over a coat of primer and putty all as specified and directed (Wall care putty can be measured and paid separately) Make - Apcolite advanced premium emulsion, Berger |
| 29 | M&L for Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth etc., complete all as specified and directed. |
| 30 | M & L for 25 mm thick, PCC 1:2:4, Type B-0, using 12.5mm graded aggregate as in Sub base for flooring/levelling coarse, sunken floor etc complete all as specified and as directed. |
| 31 | M&L for Double charged Virified tiles (dark shade) 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 n exc 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:4) all as specified and directed. |
| 32 | - Ditto - all as per item No 31 here-in-before but in vertical surface (dado/skirting) to match the shade of floor tiles laid over and including 10mm thick back coat in CM (1:4),complete all as specified and directed. |
| 33 | M&L for Non skid ceramic colored tiles of size 300x300mm, 7 to 8 mm thick (square / rectangular) as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed. Make : Kajaria / Jhonson/ Somany. |
| 34 | M&L for ceramic colour tiles in vertical surface of size 450 X 300 x 7 mm thick, jointless type, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, complete all as directed. Make - Kajaria Jhonson / Somany |
| 35 | M&L 20 mm thick granite slab, tabled rubbed, machine cut, duly grinding, polishing, moulding etc of all outer edges / sharp corners, duly fixed in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4), incl pointing in grey cement (1:2) using marble dust with admixture of pigment to match with the shade of slab, complete all specified and directed. (Note:- granite in one picece to be used for treads in step with nosing at front and two no of grooves) |
| 36 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as directed by Engr in Charge. |
| 37 | S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls incuding necessary clamps and fittings etc to fixing on walls all as specified. |
| 38 | S & F 110 mm bore PVC (SWR) bends of any radius. |
| 39 | S & F False Ceiling Frame Work using Aluminium anodised snap grid of size 605 x 605 mm size of standard aluminium section such as wall angle of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/Rm main/cross tees of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/Rm, grid size n.exc. 605 x 605mm suspended with 4mm dia GI wire at interval n.exc. 600mm centre to centre for main & cross tees fixed to roof slab roof truss fixed with suitable size MS hook and fastening bolts etc fixed in ceiling with clips to aluminium snap grid for fixing 6mm thick non Asbestos cement building boards fixed to ceiling frame work all as specified. (ceiling board measured and paid seperately). |
| 40 | S &F 4 mm thick Non asbestos cement building boards of suitable size to fixed in aluminium /GI /wooden framework etc in ceiling with necessary screws all as specified. |
| 41 | S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 42 | Returning, filling in, including spreading, levelling, wateringand well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and as directed by the Engineer-in-Charge |
| 43 | Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed by the Engineer-in-Charge |
| 44 | M&L Hardcore (Broken stone) of guage exc 63mm but n exc. deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed. |
| 45 | M&L for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate), complete all as specified and directed. |
| 46 | M&L for moorum/red bajri in floors or paving laid in layers n exc 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. |
| 47 | M&L for 75 mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection and path laid in alternate panels not more than 3 mtr in length, laid to slope 1:30 including forming joints 10 mm wide and upto full depth of PCC and filled with bitumen mastic (1:3) 1 part bitumen 85/25 and 3 parts of sand complete all as specified and directed. {Note:-Rate is deemed to be inclusive of materials against forming & filling of joints} |
| 48 | M&L for powder coated aluminium frame for doors, windows, ventilators with one or more rebates, fabricated out of powder coated aluminium hallow square or rectangular section of required size incl necessary joining cleats, fixing screws etc complete, having size of frame for doors 100mm x45mm x 3.18 mm thick; for window 104mm x 45mm x 3mm thick; for ventilators 59mm x 33mm x 2.5mm, complete all as specified and directed. |
| 49 | M&L for powder coated aluminium door shutters, aluminium section for top rail and styles 85mm x 45mm x 2.0mm thick; bottom rail 100mm x 45mm x 2mm thick and lock rail 100mm x 45mmx 2.0mm thick incl necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, powder coated aluminum hinges, powder coated aluminum snap beading, screws, Glass Pan etc, complete all as specified and directed. |
| 50 | M&L for powder coated aluminium window shutters, aluminium section for top rail and styles 85mm x 45mm x 2.0mm thick; bottom rail 100mm x 45mm x 2mm thick and lock rail 100mm x 45mmx 2.0mm thick incl necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, powder coated aluminum hinges, powder coated aluminum snap beading, screws, Glass Pan etc, complete all as specified and directed. |
| 51 | S&F in repair 5.5 mm thick sheet tinted glass and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed including hacking out old glass complete all as specified and directed. |
| 52 | S & F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed |
| 53 | M&L for aluminium (Extruded section) body door closer, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 60 to 80 kg complete all as specified and as directed. |
| 54 | M&L for 100 mm butt hinges stainless steel medium weight approved make ISI marked complete all as specified and directed. |
| 55 | S&F 125 mm aluminium alloy handles, cast type anodised complete all as specified and directed. |
| 56 | S&F150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 57 | S & F Door Stopper of size 150 mm of aluminium alloy body double leg with rubber bush complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 58 | S & F Door Stopper of size 150 mm of aluminium alloy body double leg with rubber bush complete all as specified and as directed. Please Enable Macros to View BoQ information |