|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: MILITARY ENGINEERING SERVICES (GE (SOUTH) UDHAMPUR) NAME OF WORK : PRON OF 02 X BATHROOM AND 02 X TOILET AT DHRUVA EQUESTRIAN NODE AND OTHER SANCTION WORK UNDER GE(SOUTH) UDHAMPUR. Contract No: GE/S(U)- /2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 3 | Taking down cement plaster of any description on brick/stone walls or concrete surfaces including racking out joints, hacking for key scrubbing down with water etc on walls and ceiling, complete all as specified and directed. |
| 4 | Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil etc complete all as specified and directed. |
| 5 | Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sqm on plan and getting out in soft/loose soil, complete all as specified and directed. |
| 6 | Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed. |
| 7 | Removing excavated material (soil) to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. |
| 8 | Returning filling in including spreading levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed. |
| 9 | Returing, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick all as specified and directed. |
| 10 | M&L PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation complete all as specified & directed. |
| 11 | M&L for RCC M-25 (20mm graded aggregate) as in foundations footings, plinth beams etc all as specified & directed. |
| 12 | M&L for RCC M-25 (20mm graded aggregate) as in columns, pillars etc all as specified & directed. |
| 13 | M&L for RCC M-25 (20mm graded aggregate) as in beams, lintels etc all as specified & directed. |
| 14 | M&L for RCC M-25 (20mm graded aggregate) as in slab type Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 15 | S&F TMT bars upto 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 16 | S&F TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required, including binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 17 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 18 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed. |
| 19 | Form work to soffit of suspended slabs such as roof slabs, floor slabs, landings and similar work, n exc 200mm thick (horizontal or sloping) complete all as specified and directed. |
| 20 | M & L formwork to sides and soffits of floor or roof beams, beam haunching's, girders, bressummers, lintes,cantilevers, shelves including supports, overhangs, etc also splays between floors and beams finished rough surfaces of concrete complete all as specified and directed. |
| 21 | M & L form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specified and directed. |
| 22 | M&L brick work with sub class B bricks, straight or curved on plan exc 6 m mean radium built in CM 1:6 all as specified and directed. |
| 23 | M & L hardcore of broken stone or boulders of gauge exc. 63mm but n exc 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface. |
| 24 | M&L 75 mm thick PCC 1:3:6 type C2 using 40 mm graded aggregate as in sub base complete all as specified and directed. |
| 25 | M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 26 | M & L for Glazed Coloured Ceramic tiles in vertical surface 300x450x7mm thick laid over 10 mm thick screed bed in CM 1:4,set and joint in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. |
| 27 | M & L 75mm the PCC 1:3:6 type C-2 as plinth protection, finished even and fair without using extra cement complete all as specified and directed. |
| 28 | S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour sheet reinforced with MS square tube all as per specififcation and drawing and all as specified and directed by Engr-in-charge |
| 29 | S&F factory made solid PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom railsMS frame shall be coverred with heat moulding plain colour PVC C channels having a PVC sheets strips of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,laock rail & bottom rail on either side &as gap insert for top rail & bottom rail panelling of plain colour PVC sheets to Be fitted in the MS frame welded /sealed to the stiles & rails with suitable complete all as specified and directed. |
| 30 | S&F steel Ventilators with top hung shutters including hinges steel peg stay, complete all as specified and directed . |
| 31 | S&F 100mm size butt hinges extruded aluminium alloy with galvanised with galvanised mild steel hinges pin anodised type B-22 complete all as specified and directed |
| 32 | S&F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed |
| 33 | S&F aluminium handles cast type of 150mm size complete all as specified and directed |
| 34 | S&F for ISI marked 250mm long aluminium alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloys to door shutter complete all as specified and directed. |
| 35 | M & L for sheet glass 3.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and directed. |
| 36 | M&L rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces & finishing the surface even & smooth without using extra cement complete all as specified and directed. |
| 37 | M&L rendering 10mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces & finishing the surface even & smooth without using extra cement complete all as specified and directed. |
| 38 | M&L Rendering 5mm thick on concrete surfaces in CM 1:3 as on ceiling all as specified and directed. |
| 39 | M&L for APP polymeric water proofing membrane minimum 3mm thick and weighting not less than 3.6 kg / sqm of make 'Moply FP' manufactured by STP Texsa Ltd or' Hyper Plas' ( polyester) manufactured by M/S IWL Ltd or'Shaliplas' (polyester) manufactured by M/S Capital Steels and chemicals Pvt Ltd or 'Mak polyplast' manufactured by M/S M K Petro as approved by GE , black finished reinforced with non woven polyester matt, with fusible finish laid over compatible bitumen primer at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or a butane gas torch, with a over lap of 75mm at the sides and100 at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacture's instructions including 0.40 Ltr/Sqm torching overlaps with a propane or a butane gas torch, with a over lap of 75mm at the sides and100 at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacture's instructions including preparation of surface, complete all as specified and directed. Note : the water proofing treatment shall be carried out by the manufacturer or their authorised applicators. |
| 40 | M & L 18-20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window sills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab complete all as specified and directed. |
| 41 | S&F Vitreous china ware wash down water closet pan, (pedestal pattern) coloured including connection to drain and to flushing pipe, anti syphonage pipe etc.complete |
| 42 | S&F 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and handle complete all as specified and directed. |
| 43 | S&F vitreous china white wash hand basin (flat back or angle back type) size 550x400mm white including brackets, pedestal, wast fittings brass chromium plated, CP waste cupling, 32mm dia, waste pipe, PVC connection 15 mm bore with PTMT nuts of length incl 15mm dia CP piller tap fancy type.complete all as specified and directed. |
| 44 | S&F 600 mm long tubular tower rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard woodembeded in cement mortor 1:3 with MS screwscomplete all as specified and directed. |
| 45 | S&F 15 mm bore Bib tap CP fency type complete all as specified and directed. |
| 46 | S&F 15 mm dia Angle valves/ stop cock, fancy type and chromium plated screwed down highpressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specified and directed. |
| 47 | S&F Vitreous china half stall urinal (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 , securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing flush Pipe, grating & union for discharge Pipe complete all as specified and directed. |
| 48 | S&F Concussive push button taps of cast copper alloy, screwed for ironpipe and fixed complete all as specified and directed. |
| 49 | S&F urinal spreader pf PTMT any colour for fixing with 15mm dia pipe (minimum weight 60 gms) complete all as specified and directed. |
| 50 | S & F CP brass shower roses 125 mm dia with or without swivel joints any size including fixing to steel pipe complete all as specified and directed. |
| 51 | S&F 15mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 52 | S&F 75mm PVC (SWR) pipes single socket in any lenth with rubber ring joints fixed to wall or in trenches complete all as specified and directed. |
| 53 | S&F 75mm PVC (SWR) bends any redius with access door complete all as specified and directed. |
| 54 | S&F GI tubes 15 mm dia medium grade laid in trenches or fitted on walls |
| 55 | S&F GI tubes 20 mm dia medium grade laid in trenches or fitted on walls /floor. |
| 56 | S&F 110 mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall or in trenches complete all as specified and directed. |
| 57 | S&F 110 mm PVC (SWR) bends any radius complete all as specified and directed. |
| 58 | S&F PVC (SWR) Floor trap, 75 mm dia of outlet, plain with grating including jointing with solvent cement and making good all as specified and directed |
| 59 | S&F 5 mm thick looking mirror of required size, fixed on walls with dash fasteners and chromium plated screws purposefully made to fix the glass by drilling hole in the glass complete all as specified and directed. |
| 60 | M & L for 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed. |
| 61 | S & F of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends for iron pipe of size 20mm bore complete all as specified and directed. |
| 62 | S & F 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 63 | M&L for preparation of newly steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 64 | S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed . |
| 65 | S&F 4 mm dia galvanised steel wire 50 mm x 50 mm mesh made up in to mattresses or cages etc all as specified and directed |
| 66 | M&L for plain cement concrete1:2:4 type B-2 using 40 mm graded stone aggregate as in channels and drains, foundation and similar work etc complete all as specified and directed. |
| 67 | M&L PCC 1:2:4 type B0 (12.5mm graded aggregate) as in coping, benching and similar work etc including necessary form work complete all as specified and directed. |
| 68 | M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:4) as in drain, walls and similar work etc complete all as specified and directed. |
| 69 | M&L for SWG drain pipe grade 'A' of 150 mm internal dia laid in trenches and jointed in cement mortar (1:1) complete all as specified and directed. |
| 70 | M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete type D2 (1:4:8) for 150mm dia pipe complete all as specified and directed. |
| 71 | M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate ) for manhole cover septic tank covers slabs etc including necessary form work and set in CM (1:4) complete all as specified and directed. |
| 72 | PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement in repair complete all as specified and directed. |
| 73 | M&L 3mm thick wall care putty on wall complete all as specified and directed |
| 74 | M&L for two or more coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and directed. |
| 75 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 76 | 10-12 mm thick gypsum boards seamless false ceiling including sunk or raised moulding or cop design as approved, moisture resistant, including GI hanging wires & frames with intermediate, perimeter channel ceiling channel, along nuts and bolts connecting plates gypsum boards, dry wall screws soffits cleats, ceiling section, rawel plugs fixtures and screws and applying two coats of emulsion paint over a coat primer on exposed surface complete all as specified and directed by Engr-in-Charge. Note : (a) Design of ceiling board as approved by Engr-in-Charge. (b) GI grid/hanging system shall be of the same make as of false ceiling manufacturer. |
| 77 | S&F rolled mild steel Fe-410w (Gde-E-250) quality 'B' Roof trusses (framed ) , trussed, purlins, crane gantries , rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats etc complete all as specified. |
| 78 | S & F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified and directed. |
| 79 | M & L for hardcore of broken bricks n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and directed |
| 80 | M&L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base complete all as specified and directed. |
| 81 | M&L for coloured chequered cement concrete tiles 30cmx30cmx2.5cm ,machine pressed; set jointed and pointed in neat cement slurry in floors, with grey cement and pigments laid over 15 mm thick screed be in CM 1:6 complete all as specified and directed. |
| 82 | S & F factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 83 | S&F Powder coated Anodised aluminium window and ventilator shutters with chowkat, side hung type without sash bar aluminium section weighing 0.55 kg/m including necessary joining cleat , glazing clips, rubber packing , anodised aluminium snap beading screws , anodised aluminium fitting such as peg stays 150mm long (1 no) hinges type B-12 100mm long (2 no ) suitable handle (1 no) etc complete all as specified and directed. |
| 84 | S&F stainless steel butt hinges medium weight 100 mm long complete all as specified and directed. |
| 85 | S & F 150mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed. |
| 86 | S&F 150 mm length Brass handles, cast type, polished bright complete all as specified and directed. |
| 87 | 15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs complete all as specified and directed. |
| 88 | M & L for 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed. |
| 89 | S&F PVC connection 15 mm size with PTMT nuts 600mm long complete all as specified and directed. |
| 90 | S&F countertop vitreous chinaware wash hand basin (WHB) white size 550mm x 400mm complete including provision of pair of mild steel angle iron brackets of suitable size duly painted, 32 mm dia chromium plated waste coupling, PVC waste pipe and cutting for pinning in ends of brackets in wall etc complete all as specified and directed. |
| 91 | S&F Water closet single piece/wall hanged pattern coloured of size 535 x 380 x 400 mm as approved and complete all as specified and directed by Engr-in-Charge .Make : Jaquar Cat part No KUS-WHT-35851S300UF or equivalent in Hindware/Cera |
| 92 | S&F 15 mm bore Bib tap CP fency type complete all as specified and directed. |
| 93 | S&F Health faucet ABS body with wall hook and 1 mtr chrome plated PVC hose pipe complete all as specified and directed. |
| 94 | S&F chromium plated toilet paper holder complete all as specified and directed. |
| 95 | S&F Soap dish complete all as specified and directed. |
| 96 | S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed. |
| 97 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and director. |
| 98 | M&L for APP polymeric water proofing membrane minimum 3mm thick and weighting not less than 3.6 kg / sqm of make 'Moply FP' manufactured by STP Texsa Ltd or' Hyper Plas' ( polyester) manufactured by M/S IWL Ltd or'Shaliplas' (polyester) manufactured by M/S Capital Steels and chemicals Pvt Ltd or 'Mak polyplast' manufactured by M/S M K Petro as approved by GE , black finished reinforced with non woven polyester matt, with fusible finish laid over compatible bitumen primer at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or a butane gas torch, with a over lap of 75mm at the sides and100 at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacture's instructions including 0.40 Ltr/Sqm torching overlaps with a propane or a butane gas torch, with a over lap of 75mm at the sides and100 at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacture's instructions including preparation of surface, complete all as specified and directed. Note : the water proofing treatment shall be carried out by the manufacturer or their authorised applicators. |
| 99 | S&F 110 mm PVC (SWR) bends any radius with access door complete all as specified and directed. |
| 100 | M & L for 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed. |
| 101 | M&L rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces & finishing the surface fair and even without using extra cement complete all as specified and directed. |
| 102 | M&L rendering 10mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces & finishing the surface fair and even without using extra cement complete all as specified and directed. |
| 103 | M & L for 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed. |
| 104 | M&L for 50 mm thick PCC 1:4:8, type D-2 by using 40 mm graded stone aggregate as in sub base floor complete all as specified and directed. |
| 105 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 106 | M&L for 75 mm thick PCC 1:3:6, type C-2 by using 40 mm graded stone aggregate as in sub base floor complete all as specified and directed. |
| 107 | M&L for Dura stone heavy duty vitrified tiles of size n exc 0.36 Sqm of 8-10mm thick as in floors set and jointed in neat cement slurry and pointed in white cement to match the surface complete all as specified and directed. |
| 108 | M & L for Glazed coloured Ceramic tiles in vertical surface 300x600x7mm thick laid over 10 mm thick rendering/backing coat in CM 1:4, set and joint in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. |
| 109 | M&L for Granite stone 18-20mm thick (table rubbed and polished) in window cills, cooking platforms and the like laid over 15mm thick layer of cement mortar 1:3 after roughening of existing concrete surface and applying a layer of neat cement slurry @ 3Kg/Sqm including pointing in white cement 1:2 using marble dust with admixture of pigments to match with shade of stone. laid, bedded and pointed in any mortar complete all as specified and directed. |
| 110 | S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site including all fixing accessories like PVC frames/fillets etc on PVC frame, complete all as specified and directed. |
| 111 | M & L for applying 1 mm thick layer of wall putty on walls to give uniform surface, surface scrubbed with emery paper and make surface good and clean complete all as specified and directed. |
| 112 | M&L for 15 mm thick screed be in CM 1:6 for bedding layer complete all as specified and directed. |
| 113 | M&L for 10mm thick rendering as back coating in CM 1:4 complete all as specified and directed. |
| 114 | M & L for Glazed Coloured Ceramic tiles in vertical surface 300x450x7mm thick laid and joint in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. |
| 115 | S&F 75mm PVC (SWR) bends any redius complete all as specified and directed. |
| 116 | S&F dia of wire in 3.15mm plain mild steel wire galvanised class 3 in fencing including straining and fixing to wood concrete pr steel posts and / or to straining bolts, including securing with and provision of galvanised iron tying wire , galvanised iron staples or steel pins, etc. as directed ( each line of wire to be measured) complete all as specified and directed. |
| 117 | Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLSH copper conductor cables (multistranded) PVC insulated and unsheathed including PVC concealed conduit pipe as per site requirement (size not less than 20 mm dia), medium grade with Modular sunken boxes & PVC/metal back plate for mounting modular type switches, sockets & regulators etc with cover plate modular type including supplying and laying PVC insulated and stranded unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire connected to earth dolly including cutting of chases in wall/ceiling etc and making good the disturbed surfaces match to existing with cement mortar and putty white /colour wash complete all as directed. Make: Havells/ Finolex/ Polycab. |
| 118 | All as per srl item No 116 but for 3/5 pin 6 Amps socket outlet on the same board including PVC insulated PVC unsheathed 2.5 sq mm earth wire and connected to earth dolly. |
| 119 | All as per Srl item No 116 but for 3/5 Pin 16 Amps socket outlet independent board with cable 4.00 Sq mm including copper PVC insulated PVC unsheathed 4.00 sq mm earth wire standard and connected to earth dolly. |
| 120 | S&F for modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with outer strip complete all as specified and directed by Engr In charge.Make:Legrand/Havell crabtree/L &T |
| 121 | S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with outer strip complete all as specified and directed by Engr In charge.Make:Legrand/Havell crabtree/L &T |
| 122 | S&F for modular socket 3/5 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner cover complete all as specified and directed by Engr In charge.Make:Legrand/Havell crabtree/L &T |
| 123 | S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with outer/inner cover complete all as specified and directed by Engr In charge.Make:Legrand/Havell crabtree/L &T |
| 124 | M &L Ceiling rose, surface bakelite 65x 50mm three terminals fixed on PVC Round Block complete all as specified and directed by Engr In charge. |
| 125 | S&F Sheet metal enclosure double door type for DBs (when MCB to be used) 8 way 240 volts with Suitable rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Make: Schneider/ Legrand/L&T |
| 126 | S & F MCB Single pole and neutral 240 volt any rating from 40 amps\\"C\\" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and directed. Make: Schneider/ Legrand/L&T |
| 127 | S & F of MCB single pole 240 volt any rating from 10 to 40 amps 'C' series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and directed Make: Schneider/ Legrand/L&T |
| 128 | S & F Exhaust fan made of sturdy Engineering plastic body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm all as specified and directed by Engr-in-charge. Make:Havells/Bajaj/CG. |
| 129 | Supply and fix electric water heater, storage type plastic body with stailness steel inner tank and heating element of 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. |
| 130 | Supply and fixing LED lights fitting 1x 20W with Aluminium Extruded Body , 230V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 131 | S & F LED wall mounting mirror type white/ warm white pitcture light fitting with high out put diffuser 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size complete Make: Philips /Bajaj/Havells |
| 132 | Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clampswith & including suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete |
| 133 | Supply & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with \\"XLPE\\" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 10Sqmm x 2 core size all as specified and directed by Engr-in-charge. Note : Earth work and other connected work shall be measured & paid sperately. |
| 134 | S&F Double Walled corrugated DWC Pipe of size 40 mm including snap fit coupler Pt-II for protection of LT Cable in underground all as specified and directed. |
| 135 | Supply and fixing GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holding of GI pipe alongwith poles all as specified and directed. |
| 136 | All as per srl item No 116 but for 3/5 pin 6 Amps socket outlet independent board including PVC insulated PVC unsheathed 2.5 sq mm earth wire and connected to earth dolly. |
| 137 | All as per Srl item No 116 but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 2.5 sq mm earth wire standard and connected to earth dolly. |
| 138 | S& F LED tube light fittings of 20 wattage including rawl/plug ,making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr fixed to wall firmly, complete all as specified and directed.Rated Wattage: 20 WattsType: Integrated LED Tube Light fitting (4 feet)Input Voltage: 220–240 Volts AC, 50 HzLuminous Efficiency: Minimum 100 lumens per wattColour Temperature (CCT): Cool White (6500K) / Neutral White (4000K) as specifiedPower Factor: ≥ 0.95THD: ≤ 10%Driver : Inbuilt constant current electronic driver, BIS approvedHousing: Aluminium extruded body with opal diffuserMounting: Surface / Batten typeProtection: IP20 or betterLife Span: Minimum 50,000 burning hoursWarranty: Minimum 2 yearsMake: Philips / Wipro / Havells / Crompton / Bajaj |
| 139 | Supply and fixing LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type/surface mounted with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete with all accessories as specified below :- Rated Wattage: 36 Watts Size: 600mm x 600mmInput Voltage: 220–240 Volts AC, 50 HzType: Edge-lit / Back-lit LED panel, slim designLuminous Efficacy: Minimum 100 lumens per wattColour Temperature (CCT): Cool White (6500K) / Neutral White (4000K) as specifiedPower Factor: ≥ 0.95THD: ≤ 10%Driver: Inbuilt constant current LED driver, BIS approvedBody: Powder coated CRCA sheet / Aluminium housingDiffuser: High transmission opal acrylic / polycarbonate diffuserProtection: IP20 or betterWarranty: Minimum 2 yearsMake: Philips / Wipro / Havells / CromptonNote:- Quoated rate includes cutting of false ceiling if required, making good damages, connection with existing wiring, earthing, testing and commissioning complete in all respects. |
| 140 | S & F Exhaust fan made of , steel body with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm all as specified and directed Engr-in-charge. Make:Havells/Bajaj/CG. |
| 141 | Supply and fixing LED lights fitting 1x 20W, 230V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 142 | S & F LED wall mounting mirror type white/ warm white pitcture light fitting with high out put diffuser 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size complete Make: Philips /Bajaj/Havells |
| 143 | S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead all as specified and directed. |
| 144 | Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete |
| 145 | Supply & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with \\"XLPE\\" insulated aluminium conductor strandard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 10 Sqmm x 2 core size all as specified and directed by Engr-in-charge. |
| 146 | Supply and fixing GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles all as specified and directed. |
| 147 | S&F Double Walled corrugated DWC Pipe of size 40 mm including snap fit coupler Pt-II for protection of LT Cable in underground all as specified and directed. |
| 148 | Supply and fixing LED lights fitting 1x 20W, Aluminium extruded body 230V,AC decorative box type with driver,holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge. |
| 149 | S&F Double Walled corrugated DWC Pipe of size 40 mm including snap fit coupler Pt-II for protection of LT Cable in underground all as specified & directed by Engr-In-Charge. |
| 150 | All as per Srl item No 116 but for 3 Pin 16 Amps socket outlet independent board with cable 4.00 Sq mm including copper PVC insulated PVC unsheathed 4.00 sq mm earth wire standard and connected to earth dolly. |
| 151 | S&F electronic step type fan regulator 100 watt 230 volts 50Hz two module C/S deluxe type complete all as specified and directed. Make- Havells Crabtree or Techno commercial equivalent in L&T/Legrand |
| 152 | S & F MCB SP capacity of 40 amps 230 volts rupturing capacity 10 KA complete all as specified and directed. |
| 153 | S & F MCB single pole 240 volt any rating from 10 to 40 amps \\"C\\" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable |
| 154 | Supply and fixing LED lights fitting 1x 20W with Aluminium Extruded Body, 230V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 155 | S & F in repair MCB single pole and neutral 240 volt any rating from 40 to 63 Amps \\"C\\" series, with rupturing capacity 10 KA ,including providing thimble for out going cable Make: Schneider/ Legrand/L&T |
| 156 | S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 4 Sqmm in PVC concealed conduit 25 mm dia including PVC insulated copper conductor cable 4 Sq mm as earth lead all as specified.Make-Polycab/Finolex/Havells |
| 157 | S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 10 Sqmm in PVC concealed conduit 25 mm dia including PVC insulated copper conductor cable 10 Sq mm as earth lead all as specified and directed .Make-Polycab/Finolex/Havells |
| 158 | S&F in replacement Sheet metal enclosure double door type for MCCB VTPN DB upto 4 way vertical type 415 volts with suitable busbar and neutral link,chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.Make: Schneider/ Legrand/Havells |
| 159 | S & F MCCB 4 Pole of capacity 40 to 100 amps 415 volts rupturing capacity 16 KA complete all as specified and directed. Make:Legrand/Havell /L &T |
| 160 | S & F Single pole and neutral enclosure with a two pin and earth plug and socket modular type complete with 20A single pole MCB for AC all as specified and directed. Make-Havells/Bajaj/C&S |
| 161 | S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 1.5 Sqmm in PVC concealed conduit 25 mm dia including PVC insulated copper conductor cable 1.5 Sq mm as earth lead all as specified and directed. |
| 162 | Supply and fixing LED luminaire 600 mm x 600 mm, 60 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete with all accessories as specifiedand directed below :- Rated Wattage: 60 Watts Size: 600mm x 600mmInput Voltage: 220–240 Volts AC, 50 HzType: Edge-lit / Back-lit LED panel, slim designLuminous Efficacy: Minimum 100 lumens per wattColour Temperature (CCT): Cool White (6500K) / Neutral White (4000K) as specifiedPower Factor: ≥ 0.95THD: ≤ 10%Driver: Inbuilt constant current LED driver, BIS approvedBody: Powder coated CRCA sheet / Aluminium housingDiffuser: High transmission opal acrylic / polycarbonate diffuserProtection: IP20 or betterLife Span: Minimum 50,000 burning hoursWarranty: Minimum 2 yearsMake: Philips / Wipro / Havells / CromptonNote:- Quoated rate includes cutting of false ceiling if required, making good damages, connection with existing wiring, earthing, testing and commissioning complete in all respects. |
| 163 | Supply and fixing LED ceiling light fitting with high out put diffuser 15 watt 220 V AC, 50 Hz decorative type with driver holder including connecting up with two core flexible copper conductor cable of suitable size complete. Make- Panasonic Lumor Anora Cat Part No PDLM16157-6500k or Equivalent make in Bajaj/Syska |
| 164 | Supply, installation, testing and commissioning of 200mm sweep exhaust fan, BLDC motor operated, suitable for wall mounting in toilet, complete with all accessories as specified below:Sweep Size:200 mm , Round shape modular type Motor Type: BLDC motor, Power Consumption: Approx 6–8 WattsSpeed: Approx 2000 RPM Input Supply: 220–240 Volts AC, 50 HzNoise Level: Low noise type Body: High grade ABS / Polycarbonate body, glossy finishBlades: Aerodynamically designed plastic bladesMounting: Suitable for wall mounting with round cut-out approx. 200-220mmSafety: Inbuilt thermal overload protectionProtection: IPX4 Warranty: Minimum 2 years Make: Atomberg / Havells / Orient Including cutting of wall, making good damages, fixing with screws, connection with existing wiring, providing PVC flexible pipe if required, testing and commissioning complete in all respects all as specified and direceted by Engr-in-charge. Total in Figures 0.0 0.0 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |