|
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheeting 0.50 mm thick of an colour having tensile strength of 550 Mpa (AZ-150) as in roof covering / cladding to wall, chajjas, etc. and fixed with self tapping screws complete all as specified and directed |
| 3 | S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheeting 0.50 mm thick of an colour having tensile strength of 550 Mpa (AZ-150) as in ridges, hips, valley gutters, drip, straight flashing etc. (length and gith as fixed) and fixed with self tapping screws complete all as specified and directed |
| 4 | S&F mild steel rolled section/tubular sections in purling , cross beam, rafter, posts etc. incl connected cleats, hold fasts etc of grade conforming to Fe 410-O or Fe 310-O complete all as specified and direcetd. |
| 5 | M&L preparation of new or previously untreated surface of steel and iron surface of any description and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete |
| 6 | S&F anodised aluminium snap grid of size 600x600 mm frame work for false ceiling including dismantling of existing false ceiling and including dismantling of wall and ceiling board complete all as specified and directed. |
| 7 | S&F exposed metal frame ceiling with calcium silicate board 6mm thick of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid complete all as specified and directed. Note:- Frame work for ceiling shall be measured and paid separately. |
| 8 | S&F anodised aluminium Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.45 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.36 mm thickness having curled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre all as specified and directed. |
| 9 | M&L for seamless calcium silicate ceiling made out of 1800 x 1200 x 12 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish including preparation of newly finished surface and applying two coat of oil bound distemper (approved color and pattern) all as specified and directed. |
| 10 | S&F hangers 2 mm dia GI ( upto 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 11 | Taking down chowkhats or frame but with shutters (without taking off shutters from the frames) n exc 1.5 sqm each complete all as specified and directed. |
| 12 | Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm but n exc 4sqm each complete all as specified and directed. |
| 13 | S&F powder coating anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat, channel etc for fixing etc. complete all as specified and directed. |
| 14 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) shutters for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285 including necessary locks handle, rubber gasket for glass/ wire mesh fixing complete all as specified and directed. |
| 15 | S&F 4 mm thick frosted sheet glass in square n exc 0.5 Sqm each pane fixed with oil putty complete all as specified and direcetd.. |
| 16 | S&F 4 mm thick frosted sheet glass in square exc 0.5 Sqm each pane fixed with used putty complete all as specified and direcetd.. |
| 17 | S&F providing and fixing factory made uPVC white colour sliding window three track made of extruded profiles with wall thickness of 2.3mm (± 0.2mm), window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm), sliding mesh sash (42mm x 57mm), sliding interlock (one vertical length in each shutters) (45.5mm x 28mm), glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, +1.2 to -0.2mm thick galvanised steel Frame (30mm x 18mm), 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, hardware [Touch Lock of zinc alloy (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note:- The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) Area exceeding 2.00 sqm each window complete all as specified and directed |
| 18 | S&F of decorative plaster of paris cornices approved depth of width n.exc 10cm to be fixed around door and windows all as specified and directed by Engineer-in-charge |
| 19 | S&F factory made single extruded WPC (wood polymer composite) solid door/ window/ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia andlength complete all as specified and directed. |
| 20 | S&F factory made single extruded WPC (wood polymer composite) solid door/ window/ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 21 | S&F factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprisingof virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 22 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush shutter door of 30 mm size open rebated and prepared to receive gauze, etc.(without sash bars) edge of framing plain, chamfered or rounded, etc; size of members of shutters comprising of virgin polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note:- Stainless steel butt hinges and necessary SS screw shall be measured and paid seperately. |
| 23 | S&F to Factory made single extruded WPC (Wood Polymer Composite) solid plain Glazed shutter door of 30 mm size open rebated and prepared to receive gauze, etc.(without sash bars) edge of framing plain, chamfered or rounded, etc; size of members of shutters comprising of virgin polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note:- Stainless steel butt hinges and necessary SS screw shall be measured and paid seperately. |
| 24 | Supply and fix stainless steel wire clothes 0.36 mm nominal dia of wire and average width of aperture 1.4 mm complete all as specified and as directed . |
| 25 | S & F stainless steel 100mm size Butt hinges, medium weight cold rolled, and fixed complete all as specified and as directed. |
| 26 | S&F 150 mm size extruded aluminium alloy handles, fabricated type., anodised handles all as specified and directed. |
| 27 | S&F 200mm size aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 28 | S&F aluminum tower bolts of extruded section of size 200mm complete all as specified and directed. |
| 29 | S&F double body, floor door stopper of aluminium alloy body and tongue, anodised fixed in door shutters complete all as specified and directed. |
| 30 | M&L for 18 mm thick Plywood (No of ply should not less than 7), grade BWP, type BB fixed with screws to timber frame work complete all as specified and directed. |
| 31 | M&L for 0.9mm thick decorative laminate type 1 of surface finish (colour and pattern as approved) fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed. |
| 32 | S&F magnetic catcher for cup boards with plastic body and striking plate not less than 40mm including letting in and fixed complete all as specified and directed. |
| 33 | S&F stainless steel non megnetic bow handle \\"D\\" type anodized 150mm long complete all as specified and directed. |
| 34 | S&F telescopic ball bearing runners minimum length 400mm (KA 5632) full extension load capacity 45 Kg complete all as specified. Make : Godrej/Hettich/Kaff |
| 35 | S&F in repair to Cabinet Hinges Soft Close SS 8 Crank complete all as specified and directed |
| 36 | S&F kitchen baskets with 100 % stainless steel, non - magnatic, multilayer chrome plated , argon welded ,double sealed ball bearing mechanism kitchen capable of holding plates , cup, saucers,bowls and dongas with 500 mm car case width of 558mm and height 200mm complete all as specified & directed. |
| 37 | S&F toughned glass of 12mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required compete all as specified and directed. |
| 38 | S&F toughned glass of 8-10mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed. |
| 39 | S&F solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed. |
| 40 | S&F door lock of size 95mmx75mmx53mm, fancy type, stainless steel body lock of premium quality/approved make for glass door with two/three set of keys complete all as specified and directed |
| 41 | S&F of SS 300mm long, fancy H type curve/straight as required handle set made out of 25mm dia stainless steel pipe fixed toughened glass doors complete all as specified and directed |
| 42 | M&L for providing and fixing stainless steel (Grade 304) made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the in toughened glass with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, with suitable arrangement. |
| 43 | S&F heavy weight stainless steel hydraulic patch fittings for single leaf having single bolt and single strock of minimum size 190 mm x 70 x 40 mm complete all as specified and as directed. |
| 44 | M&L double action, floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 45 | S&F swivel magnifying mirror of round shape fixed on wall with SS screws complete all as specified and directed.Cat part No CAN-1195N of aquar or equivalent in Cera/Hindware as approved by GE. |
| 46 | S&F designer bevelled edge frameless looking mirror of selected quality glass of min 5mm thick fixed on wall with SS studdand screws in any size not exc 0.30 Sqm complete all as specified and directed |
| 47 | M&L for 25mm stainless steel drepary curtain rod decorative type including curtain fancy type including bracket & nobs complete all as specified and directed |
| 48 | S&F of stainless steel plate rack complete assembeled set of (size 31 x 36 x 10 inch) fixed with screws complete as specified and directed. |
| 49 | Dismantling floor, hearth or wall tiling including cement motar bedding (but not backing), removing serviceable tiles to stores and rubbish of the premisses complete as specified and directed. |
| 50 | M&L for coloured glazed ceramic tiles in vertical surfaces 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over and including 10mm thick screed bed or bedding layer of cement mortar 1:4 complete all as specified and directed |
| 51 | M&L for non skid ceramic white tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick for laying floor finish in CM 1:6 complete as specified and directed. |
| 52 | M&L for non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors & skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15mm thick for laying floor finish in CM 1:6 complete as specified and directed. |
| 53 | M&L for virified ceramic tiles light shade, 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15mm thick for laying floor finish in CM 1:6 complete as specified and directed. |
| 54 | M&L of 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including screed bed or bedding layer of mortar 15mm thick for laying floor finish in CM 1:6 complete as specified and directed. |
| 55 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed by Engr-in-Charge |
| 56 | M&L 75mm thick PCC 1:3:6 type C-2 using 40mm gradded stone aggregate as in plinth protection surface finished even and smooth without using extra cement all as specified and directed. |
| 57 | Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth and getting out hard dense soil all as specified and directed. |
| 58 | Returning filling in exevated soil including spreading, levelling, watering & well ramming in layers not exc 25cm complete all as specified and directed. |
| 59 | M&L for hardcore of broken stone of gauge n exc. 63 mm, deposited, spread, levelled and rammed in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 60 | M&L PCC 1:4:8 type D-2 40mm graded stone aggregate in foundation, filling and mass concrete etc as specified and directed. |
| 61 | S&F Providing and laying 60mm thick rubber moulded factory made chamfered edge cement concrete glossy finish paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, laid in required colour & pattern over and including 50mm thick compacted bed of fine river sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer and filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed |
| 62 | M&L Providing, cement concrete 1:2:4 type B1 in lintels upto 1.5m clear span, cills, steps; copings, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including neccessary formwork. |
| 63 | M&L for reinforced cement concrete of M-20 grade using 20 mm gradded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 64 | M&L for reinforced cement concrete of M-20 grade using 20 mm gradded stone aggregate as in columns,pillars,piers,post and struts complete all as specified and directed. |
| 65 | M&L for reinforced cement concrete of M-20 grade using 20 mm gradded stone aggregate as in beams, cantilevers, bressummers, chajja,lintels over 1.5m span complete all as specified and directed. |
| 66 | M&L for TMT Bars 10 mm dia and over, cut to length and bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less 0.9 mm dia or securing with clips complete all as specified and directed. |
| 67 | M&L for TMT Bars 6mm to 8mm dia in stirrups, spacers and binders, cut to length and bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less 0.9 mm dia or securing with clips complete all as specified and directed. |
| 68 | use and waste for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 69 | Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed. |
| 70 | Removing excavated material ( soils) not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed. |
| 71 | Demolition of brick work, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 72 | M&L for brick work with sub class ‘B’ bricks (modular size bricks) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed. |
| 73 | M&L for brick work with sub class ‘B’ bricks (modular size bricks) straight or curved on plan any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed. |
| 74 | M&L 10 mm thick rendering in CM 1:6 on fair faces of old or new brick work wall surface, finished even and smooth without using extra cement including taking down of plaster all as specified and directed. |
| 75 | M&L 15 mm thick rendering in CM1:4 on outer faces old or new brick work wall surface, finished even and smooth without using extra cement including taking down of plaster all as specified and directed. (water proofing compound measured and paid seperately) |
| 76 | M&L for preparation of newly plastered or unplastered surfaces in walls soffits, facia, chajjas and applying two coat of exterior weather proof water based emulsion over a coat of compatible primer complete all as specified and directed. |
| 77 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of white cement based putty of 1-2 mm thick complete all as specified and directed. |
| 78 | Supply only Integral water proofing compound complete all as specified and directed. |
| 79 | S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm |
| 80 | S&F of vanity of size 820x450mm with vitreous china wash basin white of suitable size incl CP waste coupling and waste pipe of 32mm bore complete all as specified and directed. |
| 81 | S&F of wash basins, vitreous china (flat back or angle back type) of size 630x450mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified |
| 82 | S&F of rotational moulded polyethylene water storage tanks, 3 layers (cylindrical vertical with closed top) of capacity 500 litres, hoisted including all fittings as required and 20 mm dia PTMT float valve (Min wt 20mm-210gms) and fixed in position complete all as specified and directed. |
| 83 | S&F of rotational moulded polyethylene water storage tanks, 3 layers (cylindrical vertical with closed top) of capacity 1000 litres, hoisted including all fittings as required and 20 mm dia PTMT float valve (Min wt 20mm-210gms) and fixed in position complete all as specified and directed. |
| 84 | S&F of GI tubing dia 20 mm dia 'medium weight' and all fittings on walls / ceilings or Laying in floors incl taking down old water tubing fixed in any positions complete all as specified and directed. |
| 85 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth |
| 86 | S &F 20mm bore hole dia stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for ironpipe or for unions and fixed. |
| 87 | M&L 75mm bore, PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and direcetd. |
| 88 | S&F Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified. |
| 89 | S&F concealed cistern body single slim in wall cistern with wall mounting frame , installation kit inluding syphonic mechanism complete all as specified and directed. Cat part No. ARS-WHT-0110 of Jaquar or equivalent in Cera/Hindware as approved by GE. |
| 90 | S&F of control plate to concealed flushing cistern complete all as specified and directed.Cat part No. ARS-WHT-0110 Jaquar or equivalent in Cera/Hindware as approved by GE. |
| 91 | S&F health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete in all easpect as specified |
| 92 | S&F of vitrous china EWC 'P' or 'S' trap ,white including plastic water closet seat ,white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device suitable for EWC complete making good to floor fixing bolt complete all as specified and directed. |
| 93 | S&F CPVC pipes SDR 11 & plain CPVC SDR 11 fitting on walls/celing or laying in floor complete all as specified and directed. |
| 94 | S&F 10 litre , PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float ,flush pipe and handle including brackets with 32mm dia PVC flush pipe complete all as specified and directed. |
| 95 | S&F overhead shower rose 200mm dia with rubit cleaning system including 200mm long compatible pipe complete all as specified and directed. |
| 96 | S&F of brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 97 | S&F SS soap dish, all as specified and directed complete all as specified and directed. |
| 98 | S&F of toilet paper holder of brass,chromium plated or ss with flat recessed type ss fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 99 | S&F of SS grating of 125 mm dia size, complete all as specified and directed. |
| 100 | S&F of SS grating of 125 mm dia size with hole for waste pipe, complete all as specified and directed. |
| 101 | S&F in of PVC waste pipe 900mm long, 32mm dia size, complete all as specified and directed. |
| 102 | S&F 40 mm waste coupling of PTMT (half or full threaded) complete all as specified and directed. |
| 103 | S&F PVC connection 15mm size with PTMT nuts of length 600 mm fixing complete all as specified and directed. |
| 104 | S&F 15 mm bore fancy type, CP tall pillar tap mixer, cast copper alloy with capstan heads, screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 105 | S&F fancy type long body, CP bib taps 15 mm dia, cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule , complete all as specified and directed. |
| 106 | S&F in 15mm dia CP stop valve/angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed |
| 107 | S&F 15 mm bore CP concealed stop valves, fancy type with long shank and cup, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, complete all as specified and directed. |
| 108 | S&F in 15 mm bib taps, cast copper alloy, screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified and directed. |
| 109 | S&F liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed. |
| 110 | S&F CP brass single lever 3-inlet diverter (complete set concealed brass operating kit with button assembly, top cover, lever, shower knob etc) for mixing hot and cold water suitable for pipe of 15mm bore size all as specified and directed |
| 111 | S&F 75mm bore, PVC (SWR) pipes single socketed in any length with rubber rings joints laid in trenches complete all as specified and directed. |
| 112 | S&F 110mm bore, PVC (SWR) pipes single socketed in any length with rubber rings joints laid in trenches complete all as specified and directed. |
| 113 | S&F 75mm bore, PVC (SWR) junction single (single 'T') equal or unequal of in trenches/floor jointing with solvent cement complete all as specified and directed. |
| 114 | S&F 110mm bore, PVC (SWR) junction single (single 'T') equal or unequal of in trenches/floor jointing with solvent cement complete all as specified and directed. |
| 115 | S&F 75mm bore, PVC (SWR) vent cowl jointing with solvent cement complete all as specified and directed. |
| 116 | S&F 110mm bore, PVC (SWR) vent cowl jointing with solvent cement complete all as specified and directed. |
| 117 | S&F compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc (Fe 410-W (Gde -E-250) quality-A) complete all as specified and directed. |
| 118 | S & F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe 410-W (Gde -E-250) quality-A) complete all as specified and directed. |
| 119 | Taking down carefully copper/aluminium point wiring concealed/ casing caping (light, fan, socket or power) including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings, call bell and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc all as specified and directed. |
| 120 | Dismantling/taking down of unserviceable old existing service /submain wire of any size all as specified and directed |
| 121 | Dismantling/taking down of unserviceable distribution boards with MCBs/change over switches, any type all as specified and directed. |
| 122 | M&L for concealed point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and includidng single core PVC insulated unsheathed flexible copper conductor FRLS cables 1.5 sqmm as per IS 694:2010 ISI marked annealed multistranded copper conductor drawn through and including medium machenical strees PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20mm noninal size including modular / non modular type all accessories/fitting / metal flush box / cover plate/junctiion boxes/ inspection cover etc ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistaranded copper conductor FRLS cable as continious earth wire connected to metalic body at one end and common earth dolly to other end including cost of cutting chase and making good to distrubed surfaces of wall with cement mortor 1: 3 including necessary plaster and poiinting in cement mortor 1:3 with white wash / distemper/ other painting complete all as specifiecd and as directed Note:- Cost of cutting chase and making good shall be included in the quated rates. |
| 123 | All as per ser item No. 121.00 here-in-before but for one light point controlled by 5/6 A two 2-way switches complete all as specified and directed. |
| 124 | All as per ser item No. 121.00 here-in-before but one socket outlet 5 pin 5/6 Amps on independent board controlled by one, one way switch complete all as specified and directed. |
| 125 | All as per ser item No. 121.00 here-in-before one socket outlet 5 pin 5/6 Amps on same board with other one, one way switch complete all as specified and directed. |
| 126 | All as per ser item No. 121.00 here-in-before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 2.5 Sqmm and 2.5 Sqmm as earth wire complete all as specified and directed. |
| 127 | S&F modular switch two way, 6 Amp, one module, 240 volts complete all as specified and directed. |
| 128 | S&F modular switch one way 6 Amp, one module, 240 volts complete all as specified and directed. |
| 129 | S&F modular switch one way 16 Amp, one module, 240 volts complete all as specified and directed. |
| 130 | Supply and fixing modular socket outlet 2-in-1, 2/3 pin, 6/16 Amps, 240 volts, controlled by one switch complete all as specified and directed. |
| 131 | Supply and fixing modular socket outlet 2-in-1, 2/3 pin, 6 Amps, 240 volts, controlled by one switch complete all as specified and directed. |
| 132 | Supply and fix sheet metal enclosures with socket plug top and MCB's with two pin and earth plug and socket complete with one single pole MCB 240 V grade 25/20 Amp complete all as specified and directed . |
| 133 | Supply and fix modular combo AC box (including socket , plug top and 25 Amp MCB's) 240 V, 50 Hz an ISI-marked, impact-resistant body and built with high-impact polycarbonate materials that offer high softening temperatures, ensuring long-lasting performance complete all as specified and directed . |
| 134 | S&F modular ceiling rose 3 terminals 65x25 mm dia poly carbonate isolated all as specified and directed. |
| 135 | S&F modular lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all as specified and directed. |
| 136 | S&F 12 watt, invertor rechargeable B22 D type LED bulb cool day light with min 4 hrs back up, 230/240V AC complete all as specified and directed. |
| 137 | Supply and fixing modular fan regulator compatable for BLDC fan complete all as specified and directed. |
| 138 | S&F LED tube light fitting bright 40 watt, slim elegant design and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed. |
| 139 | S&F LED tube light fitting bright 10 watt, slim elegant design and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed. |
| 140 | S&F modular, bell push 6 Amp one module, 240 volts complete all as specified and directed. |
| 141 | S&F call bell Ding Dong 230V, AC, single phase ISI marked all as specified and directed. |
| 142 | S&F call bell, Multi Music type 230V, AC, single phase ISI marked all as specified and directed. |
| 143 | S&F in replacement of building security light fitting complete with 36 watt, IK- 08, LED type pressure die-cast aluminium housing and heat resistant toughened glass with frame protection (IP-66 ) and better optics for uniform distribution complete including to fixed bracket made out of GI pipe 32 mm dia (light grade) 1.5 metre long and MS clamp and nut bolts washers and connected with twin core cable 1.5 sqmm from ceiling rose to fittings connector all as specified and directed |
| 144 | Supply and fixing in replacement factory made epoxy powder coated Distribution Board TPN, 4 ways ( VTPN MCCB DB ) and space for MCCB as incomer, with metal door ( IP-43 protection ) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including isolated Neutral Bar, Insulated busbar assembly, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified and directed.NOTE:- MCCB shall be measured and paid seperatly. |
| 145 | S&F sheet metal enclosure, double door type, surface mounted concealed in wall 12 ways, 240 Volts, ISI marked 200 amps bus bar dust and vermin proof IP-54 protection , suitable for incorporation MCBs and isolators etc complete all as specified and directed. NOTE:- MCB shall be measured and paid separately. |
| 146 | S&F sheet metal enclosure for MCB, DB, TPN, 415 Volts, 200 amps rated busbar, 4 way, Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 54 including wooden rectangle board of first class hardwood of suitable size for mounting of DB box complete all as specified and as directed. NOTE:- MCB shall be measured and paid seperatly. |
| 147 | S&F ON load, changeover switch, rotory type 100 Amp, 415 Volt , TPN, front operated with sheet metal enclosure suitable for mounting on existing wall as per sample and site requirement complete all as specified and directed. |
| 148 | S&F ON load, changeover, MCB DP of capacity 63 Amp, 2 Pole, breaking capacity 10 KA with complete electrical connections by appropriate size of copper lugs, complete all as specified and directed. |
| 149 | Supply and fix in replcement MCB 6-32 amps, 10 KA, SP, 240 volt, 'C' series all as specified and directed |
| 150 | Supply and fix in replcement MCB 63 amps, 10 KA, SP, 240 volt, 'C' series all as specified and directed |
| 151 | Supply and fix in replcemen of MCB, SPN 63 amps, 10 KA, 240 volt, 'C' series all as specified and directed |
| 152 | Supply and fix in replcemen of MCB, TPN 63 amps, 10 KA, 240 volt, 'C' series all as specified and directed . |
| 153 | Supply and fix in replcemen of MCB, TP 63 amps 10 KA, 240 volt, 'C' series all as specified and directed . . |
| 154 | S&F three phase, automatic changeover current limiter(ACCL) of capacity 63 Amp, 4 Pole, 415-420 V, 50 Hz with complete electrical connections by appropriate size of copper lugs incl fixing arrangements complete all as specified and directed. |
| 155 | S&F MCCB, 125 Amp, 3 Pole, breaking capacity 36 KA with complete electrical connections by appropriate size of copper lugs, complete all as specified and directed. |
| 156 | M&L in replacement for sub main wiring (single phase) with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 4 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed.Note:- Two runs of 4.0 sqmm cable and one run of 4 sqmm cable alongwith PVC conduit including its accessories shall be measured one unit length. |
| 157 | M&L in replacement for sub main wiring (Single phase) with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 6 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed.Note:- Two runs of 6.0 sqmm cable and one run of 6.0 sqmm cable alongwith PVC conduit including its accessories shall be measured one unit length. |
| 158 | M&L in replacement for sub main wiring(Three phase) with four runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 25 mm dia with its accessories, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 6 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed.Note:- Four runs of 6.0 sqmm cable(three phase and neautral) and one run of 6 sqmm cable(Earthing) alongwith PVC conduit including its accessories shall be measured one unit length. |
| 159 | Supply and fixing Indoor decorative roof artifical blue sky cloud flat panel LED Light luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare, free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engineer in charge . |
| 160 | Supply and fix of LED slim square/circular panel light fitting for surface ceiling light 12 watt, colour warm including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed. |
| 161 | Supply & fix recess mounted down lighter with pressure die-cast aluminium heat sink & clear PC as a cover in white powder coated finish with Independent electronic LED driver. mounting COB Spot LED light round warm in colour with excellent thermally managed luminaire 9 watt , 220V AC with high efficiency PMMA diffuser soft glare free light suitable for roof ceiling including connecting up with driver three core flexible coppder conductor cases of suitable size complete all as specified and directed by Engineer in charge. |
| 162 | Supply & fixing decorative wall light, gold finish fixture with white glass diffuser double arm brown metal wall light colour- metal (Black Antique) glass (White) cap type suitable for E27 holder to fit LED bulb & maximum wattage support , upto 40W , 220V, design versatile & stylish design with modern fittings & metal frame. incl 9 W warm LED bulb suitable for bedroom, living room etc. complete all as specified and directed. |
| 163 | Supply & fixing curved 6 watt LED warm white adjustable multiple angle mirror Light including inbuilt LED driver new generation, energy saving, environmental friendly, long life aesthetically designed for diffused lighting with high power LED as light source complete all as specified and directed by Engineer in charge |
| 164 | S&F bed side metallic wall lamp with a round / square cotton shade, and control switches located on its base and the lamp includes a flexible shaft with an additional LED, 80 degree lighting angle upto 6 watt LED warm white including inbuilt LED driver energy saving, environmental friendly, long life aesthetically designed aluminium landscape for diffused lighting with high power LED as light source complete all as specified and directed. |
| 165 | Supply and fix exhaust fan, steel body AC single Phase, 230V of size 300 mm sweep with, blades, and frame and louvers complete including making suitable size of hole in existing wall upto finish level all as specified and as directed. |
| 166 | Supply and fix heavy duty exhaust fan, steel body AC single Phase, 230V of size 380mm sweep with, blades, and frame and louvers complete including making suitable size of hole in existing wall upto finish level complete all as specified and as directed. |
| 167 | Supply and fix exhaust fan, made of sturdy engineering plastic body AC single phase, 230V, 50 Hz, RPM 1200, copper winding of size 300 mm sweep with, blades, and frame and louvers including complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 168 | Supply and fix exhaust fan, made of sturdy engineering plastic body AC single phase, 230V, 50 Hz, RPM 1200, copper winding of size 300 mm sweep with, blades, and frame and louvers including complete all as specified and as directed. Please Enable Macros to View BoQ information |