|
| 1 | Boaring and casting of 30cm. dia double under reamed pile of 50cm. dia of bulb and 3.50m deep below ground level in black cotton soil consisting 04 nos.12mm dia main bar and 6mm dia stirrups @ 25cm. c/c filled with R.C.C. in proportion of 1:2:4 cement, coarse sand and 20mm. gauge stone grit including supply of all materials, labour, T&P etc. required for proper completion of the work and as per direction of Engineer-in-charge. Analysis. |
| 2 | Boaring and casting of 20cm. dia single under reamed pile of 50cm. dia of bulb and 3.50m deep below ground level in black cotton soil consisting 04 nos.10mm dia main bar and 6mm dia stirrups @ 25cm. c/c filled with R.C.C. in proportion of 1:2:4 cement, coarse sand and 20mm. gauge stone grit including supply of all materials, labour, T&P etc. required for proper completion of the work and as per direction of Engineer-in-charge. Analysis. |
| 3 | Excavation in foundation in black cotton soil including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches with use of special tools and plants such as pick axes and sabbals etc required for proper completion of the work.S.I.No.257 |
| 4 | R.C.C. work with cement approved coarse sand and 2 cm. gauge approved stone grit in proportions of 1:2:4 in raft foundation excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all material labour, tools and plants required for proper completion of the work including cost of binding wireS.I.No. 287 |
| 5 | Same as item no.4 above but in the R.C.C. lighter beam 1:1.5:3 having spans up to 6 meters. required for proper completion of the workS.I.No. 285 (i) |
| 6 | M-150 class brick work in 1:4 cement and coarse sand mortar in foundation and plinth including cost of all materials, labour and tools & plants, etc. required for proper completion of the work. S.I.No. 304 |
| 7 | Sand filling in plinth including supply of necessary quantity of sand from a suitable distance including watering, dressing etc. inlcluding supply of all materials, labour, T & P etc required for proper completion of work. S.I. No. 255 |
| 8 | 2 cm thick damp coarse with cement and approved coarse sand in 1:2 with and including water proofing materials as ordered by the Engineer-in-charge in the proportion as specified by the manufacturers including supply of all materials, labour, T&P etc required for proper completion of the work and including proper curing shuttering as necessary.S.I.No.360 |
| 9 | Same as item no.4 above but R.C.C. work in 1:1.5:3 in Column work. S.I.No.289 |
| 10 | Same as item no.4 above but R.C.C. work in 1:1.5:3 in slab work SI.No.283 (i) |
| 11 | Mild steel or iron work in plain work such as reinforced concrete/brick work wrought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage and hooks, and authorized over lapping shall be measured. S.I.No. 504 |
| 12 | M:150 class brick work in 1:4 cement & coarse sand mortar in super structure in one brick thick wall including necessary cutting and moulding of bricks as required and also including honey comb brick work and supply of all materials, labour, T&P etc required for proper completion of the work.S.I.No.303,309 & 310 |
| 13 | 5 cm thick ferro cement concrete in pro-portion of 1:2:4 with cement, approved coarse sand and approved stone grit 2 cm gauge with murga-jali and water proof cement compound including supply of all materials, labour, T&P etc required for proper completion of the work. (New item no. 2 P-54Roof Work) |
| 14 | Supply & fixing of M.S.Grill of approved quality and drawing made of flat iron not bigger then 20x4 mm size including supply of all materials, labour, T&P etc and all taxes and also one coat of red oxide paint complete in all respect as per direction of Engineer-in–charge for proper completion of work at site.S.I.No.New Item-3 P-53 |
| 15 | Supply of M.S. angle iron doors, windows or ventilators frame made of approved M.S. angle iron, wrought to required form including drilling holes, welding and resetting where necessary and also including supply of all material such as steel hinges of required size nut and bolts etc and also including all taxes, wastage and one coat of red oxide paint complete in all respect as per direction of E/I. S.I. No. New item (2) P- 53 |
| 16 | Supply and fixing of 4 cm thick sheesham wood fully glazed door and window shutter including supply and fixing of wooden cleats and stops including fixing and adjustment of hings, bolts, locks, handles, spring and other fittings but excluding their supply and including fixing the glass panes with putty and brad glass to be 4 mm thick fitting with necessary screws.S.I.No.424 P-46 |
| 17 | Supply & fixing of 30 mm thick Flush doors commercial quality confirming to IS 2202 part-1(1983) including fixing of wooden cleats and stoppers including fixing and adjustment of hinges, bolts, looks, handles, springs, as per direction of Engineer-in-charge. S.I.No. 470 P-48 |
| 18 | M.S. or iron work in heavy size such as trusses, built up gates, doors frames, record racks, roof work, gates etc. wrought to required from including drilling holes, revitting or welding where necessary and also including supply of steel, bolts, nuts westageetc and their fixing etc required for proper completion of the work. S.I.No.503 |
| 19 | Approximate cost of oxidized iron fittings with screws for doors, windows etc required for proper completion of the work.S.I.No.472 |
| 20 | Supply & fixing of Rolling Shutters of approved make made of 80x1.25mm cold rolled M.S. Lath inter locked throughout their entire length and joined together at the end by end locks & mounted on specially designed pipe shaft with brackets side guides & arrangements for inside & outside locking with push & pull operation complete but excluding the cost of top cover & springs.S.I.No.520 |
| 21 | Providing and fixing of 27.5 cm long wire springs grade 2 for rolling shutters. S.I.No.521 |
| 22 | Providing and fixing of top cover for rolling shutters. S.I.No.522 |
| 23 | Providing and fixing of ball bearing for rolling shutters |
| 24 | M-150 class brick work in 1:4 cement & fine sand mortar in super structure in Half Brick thick wall including necessary cutting and moulding of bricks as required and also including honey comb brick work and supply of all materials, labour, T&P etc required for proper completion of the work.S.I.No.305,309 & 310a |
| 25 | 12 mm thick plaster in 1:4 cement and coarse sand mortar thickness not to be less than 10 mm including supply of all materials labour and T&P etc. required for proper completion of the work. S.I.No. 17.58(ii) |
| 26 | Finishing walls with water proof cement paint of approved make and quality on new work with three coats to give an even shade including supply of all materials, labour, T&P etc. required for proper completion of the work. S.I.No.660 & 661 |
| 27 | Providing and applying plaster of paris or Birla white putty over plastered surface to prepare the surface even and smooth complete.S>i. New item P-63 |
| 28 | Supply and fixing 10 cm dia PVC down pipe complete with roase heads, bends MS clamps 2.5 cm x 3 m fixed to wall by 10 cm long 6 mm dia nail and including repair of plaster or pointing if damaged during fixing of pipes including cost of all materiacls, labour, T & P etc required for proper completion of work. S.I.No. New item 3 P- 68 |
| 29 | One priming coat and two coat of oil distemper on new work including supply of all materials, labour, T&P etc. required for proper completion of the work. S.I.No.649+650 |
| 30 | Painting or Varnishing on new iron work in small areas or new wood work with two coats of ready mixed priming paint and one coat of approved superior quality ready mix paint or varnish including supply of all materials, labour, T&P etc. required for proper completion of the work paint to be used should confirm the I.S.I.No.103-1950 S.I.No.641&642. |
| 31 | 2cm thick cement plaster in dado or skirting in 1:2 cement and coarse sand laid in panels, finished with 3 mm floating coat of neat cement including supply of all materials, labour, T&P etc required for proper completion of the work.S.I.No.597 |
| 32 | Earthwork in filling work including cartage upto 5 km. outside market yard.Analysis. |
| 33 | Providing and fixing of 6 mm thick AC sheet strips in joints of floor & skirting at the time of laying floor, flush with floor level including labour, T & P etc required for completion of the work. Analysis |
| 34 | P.C.C.in 1:2:4 with cement, coarse sand and 2cm gauge stone grit laid in panels finished with 3mm floating coat of neat cement including supply of all materials, labour, T&P etc. required for proper completion of the work.S.I.No.New item a |
| 35 | Cement concrete in 1:4:8 with cement, coarse sand & 4 cm gauge stone ballast including supply of all materials, labour, T&P etc required for proper completion of the work. Analysis. Please Enable Macros to View BoQ information |