|
| 1 | S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering or fixed to wall with self tapping screws complete all as specified and as directed incl dismantling of steel sheeting any gauge, thickness including Naintla or similar pattern roof covering (corrugated, semi corrugated , etc) sheet in roof covering. |
| 2 | M & L for Non-Skid ceramic Coloured Tiles 7 to 8mm thick(squre/rectanglar) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors over 15 mm screed bed or bedding layers in cement mortar 1:6 Set and Jointed in neat Cement Slurry and Pointed in Colour Cement to match,and removing serviceable tile to store and rubbish off the premises incl dismantling of floor,hearth or wall tiling includinguding cement mortar bedding but not backing and rubbish off the premises.complete all as specified and directed by Engr-in-Charge |
| 3 | Taking down shutters of any description area exceeding 2 Sqm each complete all as specified and directed. |
| 4 | S &F Flush shutters 30mm thk, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed by Engr-in-Charge |
| 5 | S&F Aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with beading to wooden frames all as specified and as directed. |
| 6 | Preparing surfaces of any description not otherwise described over 10 cm width or girth of new or previously untreated wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge |
| 7 | Preparation of new surfaces of steel of any description over 10cm grith or width, not otherwise described with one coat of red oxide followed by two coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge |
| 8 | Dismantling structural steel work including doors and gates of any description. |
| 9 | S & F, Framed work of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete and conforming to Fe 410-W Gde E-250 quality 'A',complete all as specified and as directed. |
| 10 | S&F 300mm Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy & fixed complete all as specified and directed by Engr-in-Charge |
| 11 | S&F Aluminium, anodised barrel tower bolts of extruded section and fixed for 200 mm length complete all as specified and directed by Engr-in-Charge |
| 12 | S&F Aluminium handles, 150mm fabricated type anodised complete all as specified and directed by Engr-in-Charge |
| 13 | S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed by Engr-in-Charge |
| 14 | S&F in repair aluminium door closer (aluminium extruded section) hydraulically regulated designation No 3, universe type, suitable for door shutte of 851 mm to 1000 in width and of weight 61 to 80 kg |
| 15 | S & F in repairs Harrison rails, 25 mm dia bore stainless steel with fixing brackets, stops rollers etc complete all as specified and directed by Engr-in-Charge |
| 16 | M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in wall panelling, shelves/boarding including dismantlng of old complete all as specified and directed by Engr-in-Charge |
| 17 | M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in ceiling, including dismantlng of old complete all as specified and directed by Engr-in-Charge |
| 18 | M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section including dismantlng framed wk complete all as specified and directed by Engr-in-Charge |
| 19 | S&F in repairs Vitreous china squating pan \\" Orissa pattern, size 580 x 440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) incl P or S trap connection to trap, and to flushing pipe anti syphonoge pipe etc incl making good to floor complete all as specified and directed by Engr-in-Charge |
| 20 | S & F in repair 10 ltrs capacity incl PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets including flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern, complete all as specified and directed by Engr-in-Charge. |
| 21 | S & F in repairs 15mm bore bib taps long or short body chromium plated with capstan head chromium plated screwed down screwed for iron pipe or brass ferrule complete all as specified and directed by Engr-in-Charge |
| 22 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins / spring clips and providing new pins / spring clips. |
| 23 | S & F 4.80 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed by Engr-in-Charge |
| 24 | Taking up or down 25 mm bore steel tubing / PPR pipe and connections and set aside for re-use or removal to store. |
| 25 | S & F 25 mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as specified and directed by Engr-in-Charge |
| 26 | S & F in repairs 15mm bore pillar tap fancy type cast copper alloy with capstan head chromium plated screwed down under high pressure with or without lettered hot or cold with long shank and fly nuts screwed for iron pipe complete all as specified and directed by Engr-in-Charge |
| 27 | S&F in repairs, 15 mm bore, PVC connection pipe 600 mm long with PTMT nuts at both ends complete all as specified and directed by Engr-in-Charge |
| 28 | S&F in repairs 15mm bore stop cock or angle valve fancy type chromium plated cast copper alloy screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule complete all as specified and directed by Engr-in-Charge. |
| 29 | S & F Vitreous china wash basin white flat back size 550 x 400 mm including including CI brackets of irosn 65 x 65 x 6mm embeded in PCC block with PCC 1:2:4 type B-1 & CP grating with holes fixed in repairs complete all as specified and directed by Engr-in-Charge |
| 30 | S & F in repairs 750 mm long, 32/ 40 mm dia., PVC plain Waste pipe for wash hand basins complete all as specified and directed by Engr-in-Charge |
| 31 | S & F in repair Chrominum plated brass soap dish (Oval shape) to walls (size not less than 125mm long) complete fix to wall all as specified and direced by Engr-in-Charge |
| 32 | S & F in repair tubular towel rail , 20mm dia 600mm long of chromium fixed and including chromium plated brass screw and wooden/plastic cleats (min weight 270gms) D type 4, complete all as specified and directed by Engr-in-Charge |
| 33 | S & F in repairs 600 X 450 mm bevelled edge miror of selected guality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washer complete all as specified and directed by Engr-in-Charge |
| 34 | M & L for two coat of cement base paint on old decorated surfaces of walls incl prepartion of surface complete all as specified and directed. |
| 35 | M & L for two coat of synthetic enamel paint on steel surfaces (on shelter panel and steel door) of any description incl preparation of old/new surface. |
| 36 | S & F sheet shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long fixed in repair to wall and make good finish complete all as specified and directed |
| 37 | S&F Corner glass shelf (with bracket), with accessories set(fixed in repair) , of make Jaquar or cera complete all as specified and as directed. |
| 38 | M&L for preperation of existing treatment on steel / CGI sheets of any description and applying two coat of synthetic enamel paint (galvanisatin should be removed if required) ,complete all as specified and as directed. |
| 39 | M&L for wooden floor tiles 7 mm thick with dove tailed joints laid over 150 micron polythene film and 3 mm thick foam as per manufacturer's instructions, and fixed with decorative wooden beadings as per site requirement including taking down of wooden floor tiles/boarding any type/description complete all as specified and directed. Make and shade of tiles be all as approved. Make : Action tesa/Kajaria/Armstrong |
| 40 | Taking down carefully copper/Aluminum point wiring (Light, Fan, Socket or power) complete fitting such as switches, ceiling, regulator, sockets etc removing materials to be store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors etc as directed. |
| 41 | M&L for point wiring with copper conductor FRLS cable Multistrand, single core 1.5 Sqmm size for one light point or bell point /Ex: fan Point controlled by one switch including one run of 1.5 Sqmm multistrand PVC copper conductor cable for earth continuity in and including PVC casing and capping of approved size and quality fixed on walls/ceiling including rectangular PVC board heavy duty type for mounting switches /sockets etc complete all as directed and specified. |
| 42 | All as per item No 41 but for 5 Amps Socket outlet in same Board with 1.5 sq mm cable complete all as specified and directed by Engr in Charge. |
| 43 | All as per Item No 41 but for 5 Amps Switch Socket Combination in independent board with 1.5 Sqmm Cable complete all as specified and directed by Engr in Charge. |
| 44 | All as per item No 41 above but for power point 3 pin switch socket 15 Amp with PVC copper conductor cable FRLS multistrand unsheathed 2.5 Sqmm on independent board incl one run 2.5 Sqmm multistrand PVC copper conductor cable for earth continuity in and including PVC casing and capping fixed on wall incl including PVC box 2 mm complete all as specified and as directed by Engr in Charge. |
| 45 | Supply and fixing piano switch single pole one way 6 Amps complete all as specified and directed |
| 46 | Supply and fixing Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed. |
| 47 | Supply and fixing of switch socket combination 5 amp-2/3 pin complete all as specified and directed. |
| 48 | Supply and fixing of socket outlet 5 amp -2/3 pin complete all as specified and directed. |
| 49 | Supply and fixing in replacement of LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 50 | Supply and fixing in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 51 | S&F in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 52 | S&F in replacement of old U/S Lamp LED 7 Watt, 230 volts 50 Hz AC complete all as specified and directed. |
| 53 | Supply and fixing of ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and directed. |
| 54 | M&L in replacement of lamp holder PVC/polycarbonate type with back platesuitable for batten fittings complete all as specified and directed. |
| 55 | S&F in replacement of Old UNSV sheet metal enclosure TPN for DBs with 200 Amps bus bar of 12 way 240 volts with blank plate Double Door all as directed by Engr-in-Charge. |
| 56 | S&F in replacement of Old UNSV sheet metal enclosure SPN for DBs with 200 Amps bus bar of 12 way 240 volts with blank plate Double Door complete all as specified and directed. |
| 57 | S&F in replacement of Old U/S MCB single phase (SP), 6 to 32 Amps 240 Volts C Curve complete all as specified and directed. |
| 58 | S&F in replacement of old MCB SPN,C- curve, 230 volt 63 amp 10KA complete all as specified and directed. |
| 59 | S&F in replacement 415V 10 KA 'B' curve miniature circuit breaker (MCB) of 100 Amps current carrying capacity TPN in the DB complete all as specified and directed. |
| 60 | M&L in replacement for sub main wiring with 2 runs of FRLS PVC insulated multistrand, copper conductor cable of size 10 Sqmm along with one run of 10.0 sqmm PVC insulated cable 1100 volts multi stranded copper conductor as earth wire in and including PVC casing & capping complete all as specified and directed. |
| 61 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspendedby insulating hangers not more than 1 metre apart including 4mm suspension wire, from pole/LT distribution panel to DB specified above, one twin core cable flat or circular of size 16 Sqmm complete all as specified and directed. |
| 62 | Supply and fix in replacement of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm sweep all as specified and directed. Please Enable Macros to View BoQ information |
| 63 | Supply and fix in replacement of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm sweep all as specified and directed. Please Enable Macros to View BoQ information |