|
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified and directed. |
| 2 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed by Engineer-in-Charge. |
| 3 | S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed. |
| 4 | M&L Non-Skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed or bedding layer in Cement Mortar 1:6 for laying floor finishes incl dismantling floor tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed. |
| 5 | M&L for (450mmx300mmx 7mm thick ) glazed ceramic tiles on vetical surfaces set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments.(Note: Any disturbed surfaces shall be matched w/o any extra cost to the govt) incl 10mm thck backing coat bed below tile for dado/skirting CM 1:4. incl dismantling wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed. |
| 6 | Demolition of cement concrete (un reinforced ) in ground floors and pavings n.exc 15cm thick (below or above ground level ) all as specified and removing debris ouside MD land complete all as specified and directed. |
| 7 | Material & Labour 25mm thick PCC 1:2:4 type B-0 using12.5mm graded stone aggregate as in flooring and finished surface as in received tiles complete all as specified and as directed. |
| 8 | S&F 4mm thick figured glass pin headed type n.exc 0.5 sqm in each pane in steel or wooden frames complete with fixing materials such as putty glazing pins wooden beads etc incl Hacking out old broken glasses complete all as specified and as directed. |
| 9 | S&F 25mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc incl taking down. complete all as specified. |
| 10 | S&F in repair Vitreous China urinal half stall, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive offixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed. |
| 11 | S&F in repair 10 ltrs capacity incl PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets including flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern, complete all as specified. |
| 12 | S&F in repairs viterous China squatting pan or Orissa patten 580 x 440 mm white with integral foot rest (excluding cistern) with front or back inlet ant pattern as in repairs incl bedding with PCC type B-I 1:2:4, using 20 mm graded crushed stone aggregate complete all as specified and as directed. |
| 13 | S&F in repairs 600 X 750 mm bevelled edge mirror of selected guality glass, fixed to wall with chromium plated brass spacer screws and cup washer complete all as specified and as directed. |
| 14 | S&F PVC connection 15mm bore with ptmt nuts of length 600mm complete all as specified and as directed. |
| 15 | S&F in repairs 15mm bore bib taps fancey type chromium plated with capstan head chromium plated screwed down screwed for iron pipe or brass ferrule. (Minm wt 350 Gms) complete all as specified and as directed. |
| 16 | S&F in repairs 15mm bore stop cock fancy type chromium plated cast copper alloy screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule complete all as specified and as directed. |
| 17 | S&F Grating doom 125 mm with waste hole of CP complete all as specified and as directed. |
| 18 | S&F in repairs tubular towel rail, 20mm dia, 60 cm long, CP with a pair of brackets, fixed to wall with CP brass screw and PVC rowl plugs ,complete all as spfd and directed. |
| 19 | S&F in repairs PVC waste pipe 32mm bore with cup and washers complete on new or old locations.complete all as specified. |
| 20 | S&F in repairs 15mm bore pillar tap fancy type cast copper alloy with capstan head chromium plated screwed down under high pressure with or without lettered hot or cold with long shank and fly nuts screwed for iron pipe complete all as specified and directed. |
| 21 | S&F in repairs for viterous china wash hand basin flat back size 600x480mm excluding traps, waste, chain, plug and porcelain stopper incl brackets,complete all as specified. |
| 22 | M&L Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing plain or corrugated sheet of any description complete all as specified and directed. |
| 23 | Demolition of cement concrete (reinforced) of any description and in any position not other wise specifically provided for and removing debris outside the MD land omplete all as specified and directed. |
| 24 | M&L for providing precast reinforced cement concrete type B1, 1:2:4 using 20mm graded aggregate as in landings, cover slabs (for man holes/drains etc) and similar articles with plain faces and setting in cement mortar 1:6 complete with joints to match including use of necessary formwork .Note : Reinforcement shall be measured and paid separately. |
| 25 | S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia omplete all as specified and directed. |
| 26 | S&F PVC (SWR) pipe 110 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors cement incl disantling complete all as specified and directed. |
| 27 | S&F PVC (SWR) 110 mm bore vent cowl complete all as specified |
| 28 | M&L for two coat of oil bound distemper on old decorated surfaces of walls incl prepartion of surface complete all as specified and directed. |
| 29 | S&F mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed. |
| 30 | S&F 100mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed. |
| 31 | S&F 100mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed. |
| 32 | S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed |
| 33 | M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in wall panelling, shelves/boarding including dismantlng of old complete all as specified and directed by Engr-in-Charge |
| 34 | M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in ceiling including dismantlng of old complete all as specified and directed by Engr-in-Charge |
| 35 | M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section including dismantlng framed wk complete all as specified and directed by Engr-in-Charge |
| 36 | M&L for wooden floor tiles 7 mm thick with dove tailed joints laid over 150 micron polythene film and 3 mm thick foam as per manufacturer's instructions, and fixed with decorative wooden beadings as per site requirement including taking down of wooden floor tiles/boarding any type/description complete all as specified and directed. Make and shade of tiles be all as approved. Make : Action tesa/Kajaria/Armstrong |
| 37 | M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed |
| 38 | M&L Rendering 20mm thick cement plaster in CM 1:4 on concrete surface finished even and smooth without using extra cement with water proofing compound as per menufactures instructions complete all as specified and directed. |
| 39 | M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and as directed. |
| 40 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified and as directed. |
| 41 | Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed |
| 42 | M&L for 15mm thick rendering on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:4 complete all as specified and as directed |
| 43 | M&L for 15 mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 6 complete all as specified and as directed |
| 44 | M&L for preperation of new plastered surface and apply two coats of cement base paint over a coat of primer complete all as specified and as directed. |
| 45 | M&L for preperation of new plastered surface and apply two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 46 | M&L for complete removal of existing old treatment of any description and preparation of old surfaces washing rubbing down and applying two coats of weather proof paints and primer complete all as specified and directed. |
| 47 | M & L for two coat of oil bound distemper on old decorated surfaces of walls incl prepartion of surface complete all as specified and directed. |
| 48 | M&L 75mm thick for PCC 1:3:6 type C-1 as in plinth protection , complete all as specified and directed |
| 49 | S & F sheet shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long fixed in repair to wall and make good finish complete all as specified and directed |
| 50 | S&F in repair aluminium door closer (aluminium extruded section) hydraulically regulated designation No 3, universe type, suitable for door shutte of 851 mm to 1000 in width and of weight 61 to 80 kg |
| 51 | S & F in repairs Harrison rails, 25 mm dia bore stainless steel with fixing brackets, stops rollers etc complete all as specified and directed by Engr-in-Charge |
| 52 | M&L for coloured chequred cement concrete tiles, machine pressed, factory made of size 300mm X 300mm X 25mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & no pigments and laid over and including 20mm thick cement screed base (1:4) complete all as specified and as directed by Engr-in -Charge. |
| 53 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 54 | S&F in repairs staiinless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with beading to wooden frames all as specified and as directed. |
| 55 | M&L for preperation of new or old untreated wood or wood based surface of any description over 10cm width or girth and applying two coat of synthetic enamal paint over a coat of pink primer complete all as specified and as directed. |
| 56 | S&F Plain Sheet glass 4.80 mm thick, selected quality and glazing with oil pane putty,glazing clips/beading in squares not exceeding 0.5 Sqm in each pane complete, complete all as specified and as directed. |
| 57 | Hacking out old broken glass (any thickness size/ quality description) from metal frame including punching or drilling out old glazing pin/spring clips and providing and fixing new one complete all as specified and directed. |
| 58 | Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and directed. |
| 59 | S&F for 30 mm thick 2nd class soft wood plain framed paneled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, Supply and fixed to chowkats, complete all as specified and directed. |
| 60 | M&L for 100 mm thick PCC 1:4:8 type D-2, using 40mm graded crushed stone aggregate as in sub base of chequered tile complete all as specified and directed. |
| 61 | Taking down carefully copper/Aluminum point wiring (Light, Fan, Socket or power) complete fitting such as switches, ceiling, regulator, sockets etc removing materials to be store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors etc as directed. |
| 62 | M&L for point wiring with copper conductor FRLS cable Multistrand, single core 1.5 Sqmm size for one light point or bell point /Ex: fan Point controlled by one switch including one run of 1.5 Sqmm multistrand PVC copper conductor cable for earth continuity in and including PVC casing and capping of approved size and quality fixed on walls/ceiling including rectangular PVC board heavy duty type for mounting switches /sockets etc complete all as directed and specified. |
| 63 | All as per item No 62 but for 5 Amps Socket outlet in same Board with 1.5 sq mm cable complete all as specified and directed by Engr in Charge. |
| 64 | All as per Item No 62 but for 5 Amps Switch Socket Combination in independent board with 1.5 Sqmm Cable complete all as specified and directed by Engr in Charge. |
| 65 | All as per item No 62 above but for power point 3 pin switch socket 15 Amp with PVC copper conductor cable FRLS multistrand unsheathed 2.5 Sqmm on independent board incl one run 2.5 Sqmm multistrand PVC copper conductor cable for earth continuity in and including PVC casing and capping fixed on wall incl including PVC box 2 mm complete all as specified and as directed by Engr in Charge. |
| 66 | Supply and fixing of piano switch single pole one way 6 Amps complete all as specified and directed |
| 67 | Supply and fixing of Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed. |
| 68 | Supply and fixing of switch socket combination 5 amp-2/3 pin complete all as specified and directed. |
| 69 | Supply and fixing of socket outlet 5 amp -2/3 pin complete all as specified and directed. |
| 70 | Supply and fixing in replacement of LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 71 | S&F in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 72 | S&F in replacement of old U/S Lamp LED 7 Watt, 230 volts 50 Hz AC complete all as specified and directed. |
| 73 | Supply and fixing of ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and directed. |
| 74 | M&L for lamp holder PVC/polycarbonate type with back platesuitable for batten fittings complete all as specified and directed. |
| 75 | Supply and fix in replacement of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm sweep all as specified and directed. |
| 76 | S&F in replacement of Old UNSV sheet metal enclosure SPN for DBs with 200 Amps bus bar of 12 way 240 volts with blank plate Double Door complete all as specified and directed. |
| 77 | S&F in replacement of Old UNSV sheet metal enclosure TPN DB with 200 Amps bus bar of 4 way 415 volts with blank plate Double Door complete all as specified and directed. |
| 78 | S&F in replacement of old MCB TPN four pole 100 Amps , 415 volt 10KA complete all as specified and directed. |
| 79 | S&F in replacement of Old U/S MCB single phase (SP), 6 to 32 Amps 240 Volts C Curve complete all as specified and directed. |
| 80 | S&F in replacement of old MCB SPN,C- curve, 230 volt 63 amp 10KA complete all as specified and directed. |
| 81 | M&L in replacement for sub main wiring with 2 runs of FRLS PVC insulated multistrand, copper conductor cable of size 10 Sqmm along with one run of 10.0 sqmm PVC insulated cable 1100 volts multi stranded copper conductor as earth wire in and including PVC casing & capping complete all as specified and directed. Please Enable Macros to View BoQ information |
| 82 | M&L in replacement for sub main wiring with 2 runs of FRLS PVC insulated multistrand, copper conductor cable of size 10 Sqmm along with one run of 10.0 sqmm PVC insulated cable 1100 volts multi stranded copper conductor as earth wire in and including PVC casing & capping complete all as specified and directed. Please Enable Macros to View BoQ information |