|
| 1 | Excavation in foundation for dtructure as per drawing and technical specification including setting out, construction shoring and bracing removal of atumps and other deleterious and disposal upto lead of 50m dressing of sides and bottam and backfilling in trenches with excavated with excavated suitable material DSR 2.1.1 (VOL-I). (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 2 | Filing of Earth in plinth including supply of necessary quantity of sand from a distance not exceeding 15.0 km. from the site of work and including watering, ramming, dressing etc rate to include cost of all materials, labour and T & P etc required for proper completion of the work. DSR 2.25 (VOL-I) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 3 | Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) including supply of all materials, labour T & P rtc required for proper completion of the work and curing complete also including cost of formwork in foundation & floors. DSR 4.1.8(VOL-I) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 4 | Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 km. (5 miles) from the site of work and including watering, ramming, dressing etc rate to include cost of all materials, labour and T & P etc required for proper completion of the work. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 5 | Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and around the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313(PartII 1981)Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1)Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4) Treatment of soil along external perimeter of building 7.5 liters/sqm. (5) Treatment of soil under apron along external perimter 5 liters/sqm. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 6 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in Footing foundation excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item. DSR 5.3(VOL-I) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 7 | P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and and over lapping & hooks.D.S.R. 5.22.6 (VOL-I) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 8 | Class-150 (Non Modular) brick work in 1:6 cement and Coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. D.S.R. 6.1.2(VOL-I) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 9 | Brick work in super-structure above plinth level up to floor two level (up to two storeys) including necessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall not to be less than 1.5 brick thick. (1:4 cement & coarse sand) (230mm wall) D.S.R. 6.4.1(VOL-I) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 10 | Mild steel or iron work of small sizes and sections such as hold fast etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. DSR 10.13 (VOL-I) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 11 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 plyveneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (35mm thick) DSR (9.21.1) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 12 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge. DSR 9.119 (VOL-I) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 13 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. DSR 9.120VOL-1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 14 | Structural steel Grill work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. DSR 9.48.1 (VOL-I) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 15 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with (4.0mm thick float glass) DSR 21.3.1 (VOL-II) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 16 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16mm DSR 0697 (VOL-I) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 17 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10mm DSR 0699 (VOL-I) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 18 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mm DSR 0703 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 19 | 12mm thick plaster in inner walls with proportion of 1:4 cement & approved coarse sand DSR 13.4.1 (VOL -II) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 20 | 15mm thick plaster in Outer walls with proportion of 1:4 cement & approved coarse sand DSR 13.5.1 (VOL -II) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 21 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR 11.37A VOL -1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 22 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. DSR 11.44 VOL -1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 23 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. (40mm) DSR 11.33 VOL -1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 24 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (Kajaria. Somany or Equivalent) DSR-11.41.A.3.1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 25 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge. Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm..(The waterproofing work to be carried out by specilized agencies and veryfy the all documents mentioned in office order no. 3690/P.C.L/Head Office/ T-6) PWD-CH-11-NEW ITEM (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 26 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete. DSR 13.80 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 27 | One priming coat & one coat oil distemper on new work including supply of material, labour T&P etc. required for proper completion of the work. (Two Coat) DSR 13.41.1 (VOLI-II) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 28 | Finishing walls with Primium Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)(Apex, Ultima, Weather Coat, All guard) Asian, Berger, DSR-13.47.1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 29 | Painting or vernishing on iron work in small areas of new work with one coat of rady mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic vernish, including supply of all materials, labour and T&P etc. required for proper completion of work. DSR 13.62.1 VOL-2 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 30 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. DSR 10.3 VOL-1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 31 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. DSR 9.48.1 VOL-1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 32 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests DSR No. 17.1.1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 33 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap. DSR No 17.7.4 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 34 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. a) 32mm dia DSR No 17.28.1.1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 35 | Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms. DSR No 17.71 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 36 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. DSR No 17.31 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 37 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. DSR No 12.41.2 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 38 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete. DSR No 12.22 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 39 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm DSR No 12.43.2 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 40 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. DSR No 12.44 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 41 | Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc. 25mm dia nominal bore DSR No 18.10.3 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 42 | Painting G.I. pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality. 25mm dia nominal bore. DSR No 18.40.3 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 43 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25mm dia nominal outer dia pipes DSR No 18.7.3 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 44 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. 15mm dia nominal outer dia pipes DSR No 18.8.1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 45 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. 20mm dia nominal outer dia pipes DSR No 18.8.2 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 46 | Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. 15mm nominal bore DSR No 18.21.2.1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 47 | Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 15mm nominal bore DSR No 18.49.1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 48 | Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore DSR No 18.51.1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 49 | Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 15mm nominal bore DSR No 18.53 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 50 | Providing and fixing gun metal gate valve with wheel of approved quality. 25mm dia nominal bore DSR No 18.17.1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 51 | Providing and fixing gun metal gate valve with wheel of approved quality. 20 mm dia nominal bore DSR No 18.17.1A (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 52 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore DSR No 18.18.3 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 53 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank. IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR No 18.48 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 54 | Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design. 100mm diameter S.W. Pipe DSR No 19.2.1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 55 | Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design. 150mm diameter S.W. Pipe DSR No 19.2.2 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 56 | Providing and fixing square mouth S.W. Gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design: With Sewer bricks conforming to IS : 4885 DSR No 19.4.2.2 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 57 | Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). (i) For Sewer Line DSR No 19.7.1.1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 58 | Providing & fixing G.I. pipes complete with G.I. fittings including tenching and refilling etc. 50mm nominal bore. DSR No 18.12.6 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 59 | Providing & fixing sand of grading zone V or coaser grade alround the G.I. Pipes in external work. 25 mm diameter pipe DSR No 18.41.3 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 60 | Providing and fixing gate valve (with cap complete with bolts, nuts, rubber insertion etc. 25 mm nominal bore DSR No 18.17.1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 61 | Constructing masonry Chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand ) for sluice valve, with C.I. surface box 100mm top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With F.P.S. bricks DSR No 18.32.1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 62 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm dia nominal bore DSR No 18.13.1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 63 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: DSR 2.1.1(VOL-I) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 64 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate) DSR 4.1.8(VOL-I) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 65 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). As in item no. 3 above but for slabs (Using 1:1.5:3 Mix concrete) DSR 5.3(VOL-I) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 66 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) DSR 6.1.2(VOL-I) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 67 | P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. DSR 5.22.6(VOL-1) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 68 | 15 mm cement plaster on rough side of single or half brick wall of mix:1:4 (1 cement: 4 coarse sand) DSR 13.5.1 (VOL-II) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 69 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate DSR 11.3.1(VOL-I) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 70 | Providing and fixing soil, waste and vent pipes : 75mm diameter : Sand cast iron S&S pipe as per IS: 1729 DSR-17.35.2.1 (VOL - II) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 71 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 DSR-19.32.1 (VOL- II ) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 72 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 73 | Wiring for twin control light point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 74 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 75 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 SQMM - 1 X 1.5 SQMM EARTH WIRE (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 76 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 SQMM - 1 X 2.5 SQMM EARTH WIRE (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 77 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 78 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 79 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 80 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone Socket Outlet (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 81 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. TV (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 82 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 83 | Supplying and fixing following size/ modules, Gl box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mm x 75mm) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 84 | Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 85 | Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 86 | Supplying and fixing brass batten/ angle holder including connection etc. as required. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 87 | Installation, Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 88 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 89 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 90 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. UPTO 450 MM SWEEP (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 91 | Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 92 | Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 93 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25A modular socket outlet and 25 A modular SP. MCB, \\"C\\" curve including connections, painting etc. as required. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 94 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 WAY (4+12 DOUBLE DOOR) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 95 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. SINGLE POLE (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 96 | 5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 97 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 98 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 99 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 100 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS: 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 101 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required 100 mm dia (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 102 | Supplying, Installation, Testing and Commissioning of three phase open well ISI Marked submersible pumpset of 1.5H.P. capacity suitable for operation on 415V(+-10%), 3- phase AC supply compatible for operations on dynamic variable frequency / speed having IP 68 Protection including providing required no's of heavy duty M.S clamps made of flat iron and suitable size top cover made of suitable thick MS sheet as required. and making of flexible IP68 cableconnections etc. complete of suitable head and discharge etc. complete as required. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) Please Enable Macros to View BoQ information |