|
| 1 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- charge: All kinds of soil(DSR 2023 SH-2.1.1) |
| 2 | 1:5:10 (1 cement : 5 coarse sand (zone-iii) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) (DSR 2023 SH-4.1.10 ) |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR 2023 SH-6.1.2 ) |
| 4 | providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)(DSR 2023 SH-4.10A ) |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, taircases and spiral stair cases above plinth level up to floor five evel, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).(DSR 2023 SH-5.3 ) |
| 6 | Steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo-mechanically treated bars of grade fe-500D or more(DSR 2023 SH-5.22.6 ) |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form work for :columns, piers, abutments, pillars, posts and struts(DSR 2023 SH-4.3.3 ) |
| 8 | 12 mm cement plaster of mix : 1:4(1 cement: 4 fine sand)(DSR 2023 SH-13.1.1 ) |
| 9 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(DSR 2023 SH-10.1 ) |
| 10 | Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Fire retardant plywood conforming to IS: 5509(DSR 2023 SH-9.126.2 ) |
| 11 | Providing and fixing ISI marked IS:1341 M.S. pressed butt hinges bright finished with necessary screws etc. complete :)75x47x1.70 mm (DSR 2023 SH-9.55.3 ) |
| 12 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss/ matt/ suede finish with high density protective surface layer and reverse side of dhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality. 1.0 mm thick (DSR 2023 SH-9.127.2 ) |
| 13 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre (DSR 2023 SH-13.41.1 ) |
| 14 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture(DSR 2023 SH-1021SUB HEAD : 13 FINISHING13.48.3 ) |
| 15 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass(DSR 2023 SH-17.7.7) |
| 16 | Supply and Fixing of Light Fitting Switch Board. (None Sheduled) |
| 17 | Supply and Fixing Wiring of Light Point. (None Sheduled) |
| 18 | S/L/J of 20mm dia PVC Cunduct Pipe etc. all complete. |
| 19 | Supply & Fixing of wiring Sub Main. |
| 20 | Supply & Fixing of Plug Point 15mm. |
| 21 | Lettering & Painting of wall etc. all complete. |
| 22 | Supply and fixing exacts fan etc. all complete |
| 23 | Supply and fixing celling fan etc. all complete |
| 24 | Supply & Fixing of 27watt. CFL etc. all complete. |
| 25 | Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & Cold Water Supply, including all CPVC Plain & brass threaded fittings I/c fixing the pipe with clamps at 1.00 m spacing, This includes Jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints, complete as per direction of Engineer-in-Charge. Concealed work, of including cutting chases and making good the wall etc.(d) 15mm nominal outer dia pipes. (Chapter No.23 Si.No.2A) |
| 26 | Supply & Fixing of brass Bib Cock of approve quality etc. all complete. (Chapter No.21 Si.No.43) |
| 27 | Supply & Fixing of C.P. brass Stop Cock (Conceled) of Standerd design of approve quality etc. all complete. (Chapter No.21 Si.No.44) |
| 28 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacture , over the plastered wall surface to prepare the surface even and smooth complete. |
| 29 | Providing and Laying Vitrified Tiles 500x500mm Size (thickness 10mm), with water absorption less than 0.08% and conforming to IS:15622, of approved brand manufacture, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints. Including 75mm thick base with concrte 1:4:8 complete as per E/I etc. all complete. (Chapter No.14 Sr.No.20) |
| 30 | Kota stone slab flooring over 20 mm (average) thick base laid over and joined with gray cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement: 4 coarse sand) :25 mm thick. (Chapter No.14 Si.No.12-11.26.1) |
| 31 | 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR 2023 S H ) |
| 32 | Supply & Fixing Granite Stone Work Display Board (Size 2.50ft x 4.00ft) including Painting, Lettering etc. all complete. (None Schedule) |
| 33 | Sub Total (A) |
| 34 | Add / Deduction For Estimate Figure Amount Match |
| 35 | Grand Total Please Enable Macros to View BoQ information |