|
| 1 | Excavating in post holes (or similar holes ) each not exc. 0.5 cum getteting out, returning filling in and ramming earth or broken rubble mixed with earth round in layers not exc. 25 cm in hard/dense soil complete all as specified and directed. |
| 2 | Demolition of unreinforced cement concrete including removal of debris outside the MD land of any description and in any position complete all as specified and directed. |
| 3 | M&L for cement concrete 1:3:6, type C2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified & as directed . |
| 4 | M&L for cement concrete 1:2:4, type B2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified & as directed . |
| 5 | M&L for mild steel angle, flat iron work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for secruing wire mesh etc) including all necessary drilling, bolting or riveting etc conforming to Fe -290-GdeE-165 complete all as specified & as directed. |
| 6 | S&F 10 mm dia mild steel screw bolts (machine made ) with hexqagonal or square heads at one end & screwed the other or screwed both ends ,each screwed end to be fitted with washers & one hexagonal or square nut length of bolt exc 5 cm & not exc 10 cm long complete all as specified & as directed. |
| 7 | Supply only mild steel, galvanised, PVC coated chain link fencing complete all as specified and directed |
| 8 | Fixing only chain link fencing including line wires any mesh size & type to any type of standards rails,straining bolts, etc., including provision of line wire complete all as specified and directed |
| 9 | M&L for preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and two coat of synthetic enamel paint over one coat of red oxide Zinc chromate primer complete all as specified and directed |
| 10 | M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide Zinc chromate primer of surface not exc 10 cm width or girth complete all as specified & as directed. |
| 11 | Excavation in trenches not exc. 1.50m wide and not exc 1.5 m in depth; not exc 10 sqm on plan and not exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed |
| 12 | M&L for plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified & as directed. |
| 13 | M&L for form work to sides of col footings, plinth beams (sides and soffits) etc with rough finished surfaces of concrete flat complete all as specified & as directed. |
| 14 | M&L for form work to sides of columns, pillars etc with rough finished surfaces of concrete flat complete all as specified & as directed. |
| 15 | M&L for reinforced cement concrete (nominal mix) 1:2:4, type B1 (using 20mm graded crushed stone agrregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass complete all as specified & as directed. |
| 16 | M&L for reinforced cement concrete (nominal mix) 1:2:4, type B1 (using 20mm graded crushed stone agrregates) as in columns, pillars, piers, posts and struts complete as specified and as directed. |
| 17 | M&L for TMT bars for reinforcement 10mm dia and over cut to lengths, bent to shape required including cranking, bending etc and binding with mild steel wire (annealed) not less than 0.9mm dia complete as specified and as directed. |
| 18 | M&L for TMT bars for reinforcement 5mm and over upto and including 10mm dia TMT bars in stirrups, spaces and binders complete as specified and as directed. |
| 19 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete as specified and as directed. |
| 20 | M&L for 3mm thick ACP cladding in wall / faces of cloumn laid over frame work complete including necessary preparation as specified and directed by Engr-in-Charge. |
| 21 | S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing confirming to Fe-290 (Gde E165) complete all as specified and directed |
| 22 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed |
| 23 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed |
| 24 | M&L for hardcore of boulders not exc. 63mm, deposited, spread and levelled in layers not exc. 15cm thick watered and remmed to a true surface complete all as specified and directed |
| 25 | M&L for 100mm thick plain cement concrete 1:4:8, type D2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed |
| 26 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed |
| 27 | M&L for machine pressed precase concrete interlocking paver block any shape and size conforming to IS-15658-2006 of 80mm thickness, M-40 grade with grey cement and pigment interstices complete all as specified and directed |
| 28 | M&L for 75mm thick plain cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed |
| 29 | S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle, channel, or flat section) including distance pieces, cleats etc. of Fe 410-W (Gde E-250) quality - A complete all as specified and directed |
| 30 | S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 31 | S&F mild steel work for wind ties for roof including securing bolts including all necessary drilling, bolting or riveting etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 32 | M&L for pre-cast cement concrete block masonry with solid blocks type C1, PCC 1:3:6 (using 20mm graded crushed stone aggregates) exc 10cm in width and setting in CM 1:6 complete all as specified and as directed. |
| 33 | S&F PVC half round 160mm dia rain water gutter eaves complete all as specified and as directed |
| 34 | S&F PVC stop end drop 160X110mm complete all as specified and as directed |
| 35 | S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls with and including suitable size mild steel clamps complete all as specified and directed Please Enable Macros to View BoQ information |