|
| 1 | Excavation for foundation in hard murum and boulder including removing the excavated material upto a distance of 50 metres beyond the building area, stacking as directed, dewateringandbackfillingwithavailablemurum,watering,ramming etc.complete.(Liftupto1.5m.)ByMechanicalMeans. |
| 2 | Excavation for foundation in laterite rock (soft or hard) including trimming and levelling the bed for the foundation removing the excavated material upto a distance of 50 metres beyond the building area, stacking as directed, dewateringandbackfillingwithavailablemurum,watering,ramming etc.complete.(Liftupto1.5m.)ByMechanicalMeans. |
| 3 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand - P/I 177/24.01 RA |
| 4 | Providing laterite stone masnory in cement mortar 1:6 in foundation & plinth including racking out joints where plastering is to be done watering & scaffolding complete. |
| 5 | Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. |
| 6 | Providing soling using 80 mm size Laterite metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. P/I - 234/25.50 (R A) |
| 8 | Providing & fixing in position steel bar reinforcement of various dia. For RCC pile caps, footing, foundations, slabs beams, coloumns, canopies, staircases, newels, chajjas, lintles, parides, coping, fins , arches etc as per detailed design, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack wleding and supporting as required complete (5 kms lead) hysd |
| 9 | Providing laterite stone masonry in cemen morter 1 : 6 in Superstructure including racking out joints when plastering is to be done/ striking joints when no plastering is to be done watering and scaffolding. P/I - Circular No.3 / 7. (R.A) |
| 10 | Providing and fixing frame with / without ventilator of size as specified with Countrynon teak wood for doors and windows including chamfering, rounding, rebating, ironholdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. |
| 11 | Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorativetype of exterior grade as per detailed drawings approved face veneers 3 mm thick on bothfaces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts,chromium plated fixtures and fastenings, with brass mortise lock, chromium platedhandles on both sides, and finishing with French Polish etc. complete. |
| 12 | Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephoneblack / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treadsand risers of steps and staircases of approved colour and shade with full moulding andthree grooved line for the treads on bed of 1:4 Cement mortar including float fillingjoints with neat cement slurry curing polishing and cleaning etc. complete. |
| 13 | Providingandfixinginposition.(asperI.S.1868/1982)Aluminiumslidingwindowoftwotrackswithrectangularpipehavingoveralldimension?63.50x38.10x1.02mmatweight0.547Kilogram/Runningmetre.andwindowframebottomtracksection61.85x31.75x1.20mmatweight0.695Kilogram/Runningmetre.Topandsidetracksection61.85x31.75x1.30mmatweight0.659Kilogram/Runningmetre.Theshuttershouldbeofbearingbottom40x18x1.25mmatweight0.417Kilogram/Runningmetre.Interlockingsection40x18x1.10mmatweight0.469Kilogram/Runningmetre.Andhandlesection40x18x1.25mmatweight0.417Kilogram/Runningmetre.andtopsection40x18x1.25mmatweight0.417Kilogram/Runningmetre.AsperdetaileddrawingsandasdirectedbyEngineerinchargewithallnecessaryAluminiumsectionsfixturesandfasteningssuchasrollerbearinginnyloncastingandselflockingcatchfittedinverticalsectionofshutterincluding5mmthickplainglass with all required screws and nuts etc, complete. With powder coating without box |
| 14 | Providing and fixing mild steel grill work for windows, ventilators weighing 15 kg per sq.m as per drawing , including necessary fixtures welding and painting with one coat of anti- corrosive paint etc . complete.- |
| 15 | Providing structural steel work in trusses other similar trussed purlins and members with all bracing, gusset plates etc.asper detailed design and drawings or as directed by Engineer in Charge including cutting fabricating hoisting erecting fixing in position making riveted/bolted/welded connectedand one coat of anticorrosive paint and over it two coats oilpainting of approved quality and shade complete |
| 16 | ProvidingandfixingofcolourcoatedZincaluminium(R)AZ150(min150gms/sq.mt.totaloneachside)profiledsheetsforroofing.Thefeedmaterialismanufacturedoutofnominal0.45mmBaseMetalThickness(BMT)(0.5mmTCT),Hi-strengthsteelwithmin.550MPayieldstrength,metallichotdipcoatedwithAluminium-Zincalloy(55%aluminiumm43.4%zinc1.6%silicon)withCOLORBOND(R)steelqualitysuperdurablepolysterpaintcoat(withinorganicpigment).Thepaintshallhaveatotalcoatingthicknessofnominal35mm,comprisingofnominal25mmexteriorcoatontopsurfaceandnominal10umreversecoatonbacksurface.Profilesheetshallhavenom.950-1050mmeffectivecoverwidthandnominal25-30mmdeepribswithsubletsquareflutinginthefivepanatnominal180-250mmcenter-to-center.Theendribshallbedesignedforanti-capacitygroove.andreturnleg.Thefeedmaterialshouldhavecoilmanufacturersproductdetailsmarkedaregularinterval.includingfastenerswithmin.fastenedwithmin.25umZinc-Tinalloycoated,Hexhead,self-drillingscrewetc.complete.(weightofprofile4.52Kilogram/SquareMetre)600mmgirth(SurfaceWidth).- |
| 17 | Providingandfixingplainzincsheetingof0.80mmthick(22B.W.G.)overtheridgehiporvalleytogalvanizedironsheetroofingincludingallfasteningandboltgalvanisedironscrewsand bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.). |
| 18 | Providing & fixing Manglore tiles with AA tiles including scaffolding to M.T. roofing excludingh wood work etc completeR.A. |
| 19 | Providing and fixing Mangalore type ridge and hip tiles class \\"AA\\" tiles, including scaffolding if necessary, pointing with coloured cement mortar and curing complete |
| 20 | Providing and laying Vetrified matt finish of IS std and approved quality 590 mm x 605 mm size for for flooring in required position with ready made adhesive mortar of approved quality in required position after making the wall portion in level in plaster of cement mortar 1:4 including joint filling with white/ colour slurry cleaning curing complete . |
| 21 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 with out neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 22 | Providing and applying plastic emulsion paint of approved quality, colour and shade toold and new surfaces in two coats including scaffolding, preparing the surface.(excluding the primer coat)etc. complete. |
| 23 | Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) ofapproved make, shade and pattern for dado and skirting in required position fixedin 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc.complete Please Enable Macros to View BoQ information |