|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : Garrison Engineer Kapurthala Name of Work : Special repairs to bldg No P-01 to 04 at Old Mil Station Kapurthala under GE kapurthala. Contract No : GE KPT- /2026-27 Bidder Name : SCHEDULE OF WORKS(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S.No Description of work Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Demolition of brick / block masonry built in cement mortar including all quoins, arches, pillars etc and clearing off the premises. |
| 3 | M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4, complete all as specified and directed. |
| 4 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for |
| 5 | Demolition of plain cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 6 | M&L for glazed ceramic coloured tiles in vertical surface 300 x 450 x 7mm thick set and jointed in neat cement Paste pointed in white or colour cement to match the colour, including 10 mm thick cement rendering in cement mortar (1:4) and including dismantling of tiles complete all as specified and directed. |
| 7 | M&L for 25mm thick plain cement concrete type B-1, 1:2:4 (12.5mm graded aggregate) as in sub base of tiles complete all as specified and directed. |
| 8 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but n.exc 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles including 15 mm thick cement screed bed in cement mortar (1:6) and including dismantling of tiles complete all as specified and directed. |
| 9 | M&L for coloured vitrified tiles light shade 10mm thick (square/rectangular) polished, area of each tile not exc 0.36 Sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick cement mortar (1:6) screed bed and including dismantling of tiles complete all as specified and directed. |
| 10 | M&L in repairs for granite tile for cooking platform 20mm thick machine cut, bedded and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including 20 mm thick bedding layer in cement mortar 1:6 and including dismantling of tiles complete all as specified and directed. |
| 11 | M&L fot 75mm thick PCC 1:3:6 type C2 as in plinth protection/hard standing finishing the surface even and smooth with out using extra cement complete all as specified and directed. |
| 12 | M&L for 25mm thick Sand filling/cushioning under interlocking tiles floors or in foundations including watering and consolidation complete all as specified and directed. |
| 13 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement with pigment complete all as specified and directed. |
| 14 | Use and waste of formwork to chajjas and similar items including edges rough finished complete all as specified and directed. |
| 15 | M&L for RCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in chajjas, shelf etc. complete all as specified and directed. |
| 16 | M&L for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending hooking etc & binding with mild steel binding steel wire (annealed) not less than 0.9mm dia. |
| 17 | Taking down cement plaster on brick work or concrete surfaces including racking out joints all as specified. |
| 18 | M&L for 12 mm thick rendering on brick work or concrete surfaces in cement mortar 1:6 complete all as specified and as directed. |
| 19 | M&L for 15mm thick rendering on fair faces of walls of brick work or concrete surfaces in cement mortar 1:4 with water proofing compound complete all as specified and as directed.Note: water proofing compound shall be measured and paid seprately. |
| 20 | Supply only liquid water proofing compound. |
| 21 | M&L for 10mm thick rendering in cement mortar 1:3 on brick work or concrete surfaces finished even and smooth w/o using extra cement in ceiling etc complete all as specified and directed. |
| 22 | M&L for preparation of new plastered surfaces of ceiling surface and applying two coats white wash on ceiling complete all as specified and directed. |
| 23 | M&L for preparation of new plastered surfaces of walls and applying two coat of birla white putty to obtain the true line to achieve smooth surface and applying two coats of oil bound distermper complete all as specified and directed. |
| 24 | M&L for applying two coats of exterior emulsion (Apex) paint on newly plastered or unplastered wall surface over a coat of cement primer including preparation of surfaces, complete all as specified and as directed. |
| 25 | M&L for preparation of old plastered surfaces of ceiling and applying two coat of white wash over and including a coat of putty complete all as specified and directed. |
| 26 | M&L for complete removal of existing treatment of old plastered surfaces of walls and applying 2mm thick Birla white putty to obtain the true line to achieve smooth surface and applying two coats of oil bound distermper complete all as specified and directed. |
| 27 | M&L for applying two coats of exterior emulsion (Apex) paint on old plastered or unplastered wall surface after complete removal of existing treatment complete all as specified and as directed. |
| 28 | Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area exc 1.50 sqm but n. exc. 4 sqm each. |
| 29 | Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area not exc 1.50 sqm each |
| 30 | Taking down shutter exceeding 1.0 sqm but not exceeding 2.00 Sqm each. |
| 31 | Taking down shutter exceeding 1.0 sqm but not exceeding 2.00 Sqm each including refixing in same opening after easing , cutting as required. |
| 32 | S&F of pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc02-05-2026 complete, as specified, size of frame 105 x 60mm filling hollow frame with PCC (1:3:6) complete all as specified and directed. Not:- PCC(1:3:6) measured and paid seperetly. |
| 33 | S&F of pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc; complete, as specified, size of frame 125 x 60mm filling hollow frame complete all as specified and directed. |
| 34 | M&L for PCC 1:3:6 type C2 as in filling of chowkhats complete all as specified and directed. |
| 35 | S&F of framed work such as grills gratings/hold fast etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framed work of water tanks and similar work complete all as specified and directed. |
| 36 | S&F of factory made 2nd class, hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to received glass, gauge, etc ( without sash bars) edges of framing plain, chambered or rounded, fitted with cut and mitred beads for securing glass , etc but difided into squares with plain chamfered or rounded mirted and rebated sash bars any numbers sizes of members of shutters as specified and directed. |
| 37 | S&F of 30mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both side all as specified and directed. |
| 38 | S&F of factory made uPVC white colour three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made |
| 39 | S&F of factory made uPVC white colour casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension (Area of window upto 0.75 sqm.) comprising of uPVC multi chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws including anodised aluminium grill ( anodised tshade according to IS:1868) of approved design/pattern, with approved std section and fixed to existing window frame with CP brass/stainless crew @ 200 c/c including cutting the grill to proper opening size for fixing and operation of hanles etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed.Not:- (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 40 | S&F of factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 41 | S&F of solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening |
| 42 | S&F of factory made solid PVC panel shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and a gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as specified in SSR Part-II- 2004 SEC 8 CLAUSE 8b1 TO 8b 2.1, complete all as specified and directed. |
| 43 | S&F of aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 150mm for pvc door complete all as specified and directed. |
| 44 | S&F of extruded aluminium alloys handles frabicated type anodized of size 150mm long complete all as specified and directed. |
| 45 | S&F of 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified and directed. |
| 46 | S&F of 100mm size butt hinges, heavy weight, cold rolled stainless steel, and fixed complete all as specified and directed. |
| 47 | S&F of 150 mm Hasp and staple, aluminium anodised, wire type, including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 48 | M&L for preparation of old wooden surface exceeding 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 49 | M&L for preparation of new wooden surface exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 50 | M&L for preparation of old steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer complete all as specified and directed. |
| 51 | S&F of 4.00mm thick figured glass, pinhead type in squares n exc 0.5 sqm each pane and glazing with oil putty complete all as specified and directed. |
| 52 | S&F of 5.50mm thick plain sheet glass, one side sheet glass is groundor obscured or frosted in squares exc 0.5 sqm each pane and glazing with metal beads complete all as specified and directed. |
| 53 | S&F of aluminium (die cast body) door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 54 | S&F in repairs for stainless steel wire cloth 0.56mm nominal dia of wire and avarage width of aperture 1.40mm and fixed with tinned tacks/screws with bolts incl leaping wooden complete all as specified and directed. |
| 55 | Taking down GI tubing and connection 15mm dia laid in floor / trenches or fixed to walls complete all as directed. |
| 56 | S&F of 16mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 57 | Taking down GI tubing & connection 20mm dia laid in floor / trenches or fixed to walls complete all as specified and directed. |
| 58 | S&F of 20mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 59 | S&F in repairs 15 mm bore CP bib taps fancy type cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 60 | S&F in repairs fancy type chromium plated stop valves/ Angle valves with long shank and cup (concealed type) cast copper alloy screweddown high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore fo size 15mm complete all as specified and directed. |
| 61 | S&F of vitreous china ware wash basin white, flat back size 550 X 400mm with pedestal including 15mm dia pillar tap swan neck, chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified and directed. |
| 62 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 63 | S&F in repairs 15mm dia brass CP mixer for mixing hot and cold water screwed down for iron pipe and fixed as complete all as specified and directed. |
| 64 | S&F in repairs 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms) complete all as specified and directed. |
| 65 | S&F in repairs CP greating round 75/100mm size (minium weight 50 gms) complete all as specified and directed. |
| 66 | S&F in repairs 32 mm bore PVC waste cupling with PVC waste pipe for WHB complete all as specified and as directed. |
| 67 | S&F in repairs 40 mm borePVC waste cupling with PVC waste pipe for ink complete all as specified and as directed. |
| 68 | S&F of steel plate rack made of stainless steel 1mm thick over all size 600 mm x750mm complete all as specified and directed |
| 69 | S&F in repair kitchen sink with drain board made of stainless steel 1mm thick sheet with plugs, washers and wastes including bedding in cement mortar including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm. |
| 70 | S&F in repair stainless steel 20mm dia curtain rail chromium plated with fixing brackets, stops, roller etc as specified and directed. |
| 71 | Cutting chases pinning in brick/stone/blocks masonary in making good to facings where required and pointing in CM (1:3) to ends or eges of steps, cills, sun shades, shelves, lintel etc and cutting chases for concealed water tubing or etc; and making good, complete all as specified and directed. |
| 72 | Taking down eaves gutters and rainwater pipes including all fittings as specified and directed. |
| 73 | S&F of 110 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 74 | S&F of 75 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 75 | S&F of 75 mm PVC (SWR) bend complete all as specified and directed. |
| 76 | S&F of 110 mm PVC (SWR) bend complete all as specified and directed. |
| 77 | S&F of 110mm PVC (SWR) junction single,(single T) equal or unequal complete all as specified and directed. |
| 78 | S&F of 110mm PVC (SWR) junction single,(double T) equal or unequal complete all as specified and directed. |
| 79 | S&F in repairs PVC(SWR) floor trap with grating and diameter of outlet 75mm including jointing to waste pipe fixed with solvent cement complete all as specified and directed. |
| 80 | Dismantiling PVC water tank of capacity 1000 /500Ltrs and removing from site |
| 81 | S&F of rotational moulded polythelene water storage tanks cylindircal water tank for hoisted and fixed in postion of 1000 ltrs capcity incl fittings and as directed |
| 82 | S&F of gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe 20mm fixed in repairs complete all as specified and directed. |
| 83 | S&F of factory made 17-18mm thick WPC (wood plastic composit boards) sheet one side prelam sheet and other side wood nature colour for cupboard shutter of density 600 kg/cm3 with 100% termite/water proof, fire rertradent, Eco friendly and finish at all edges at level for making edges lipping using binding tape etc as in Kitchen cupboard, cabinet etc complete all as specified /Manufacturer's specification and directed |
| 84 | - ditto all as per srl item No 82 but both side plain board complete all as specified and directed. |
| 85 | S&F of factory made 5mm thick WPC board sheet for kitchen cabinet/cupboard of density 600 kg /cm3 complete all as specified and directed. |
| 86 | S&F of 150 mm size stainless steel brignt finish handle as approved by GE, fixed with nut and bolt complete all as specified and directed. |
| 87 | S&F of telescopic type Side channel of drawer of standard size incl roller for moving drawer made out of mild steel bright finish or electro galvanised ( soft close ball bearing runners) with width of flap 30mm & 60mm long comp all as spd. |
| 88 | S&F of stainless steel plain basket of size 17''x20''x6'', complete all as specified and directed. |
| 89 | S&F of stainless steel cutlery of size 17''x20''x6'', complete all as specified and directed. |
| 90 | S&F of stainless steel cup & soucer of size 17''x20''x4'', complete all as specified and directed. |
| 91 | S&F of stainless steel plate basket of size 17''x20''x6'', complete all as specified and directed. |
| 92 | S&F of stainless steel auto closing, zero crank hinges,fancy type with concealed pattern fitted to shutters complete all as specified and directed. |
| 93 | S&F of stainless steel dish plate rack drainer (GTPT Set ) of 34\\" long and 10\\" wide , complete all as specified and directed. |
| 94 | S&F of 150N kitchen cabinet gas piston spring kitchen cabinet stay shocker strut hydraulic lift support capacity 15 Kg , complete all as specified and directed. |
| 95 | S&F of magnetic catcher for shutter of approved pattern fitted with suitable screws complete all as specified and directed. |
| 96 | M&L for water proofing treatment to sunken floors of kitchen, toilets, laboratories,bath and WC's etc shall be as under:- |
| 97 | Application of Two component acrylic modified cementitious coating.(a) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement litance, existing coatings and achieve a gripping profile that is clean, dry and free from litance and any other form of surface contamination. the installation instructions in manufacturer's published literature should be strictly compiled with, including but not limited to the following:-(b) Chipping out any visible cracks in ' V- Groove' pattern as applicable. Special attention on this part cleaning of cracks and then filling those cracks with SIKA latex SBR 100 putyy/ Dr Fixit 302 SBR latex/ perma latex SBR / FOSROC Nitobond SBR latex/ Asian Paints latex as required.(c) Fixed all the CI / PVC pipe, spout pipe and traps up to outside the beam of sunken portion and selaed the joints of pipes and traps / pipes and concrete properly by Epoxy sealant including cutting to existing wall and making good the disturbed surface.(d) Providing drainage spout pipe pvc 40mm dia bore heavy grade with trap upto outside of outer wall ( Approx 450mm to 600 mm long) complete all as specified and directed.(e) M&L for providing 75mm avg. thickness PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate to providing proper slope for drain out seeped water from spout pipe.(f) Two coats of neat cement slurry using metal float should be provided on concrete surface within 1-2 hours or concrete in green state.(g) Curing of PCC should be done for 48 hours.(h) Final cleaning of surface with power grinder, wire brush, hair brush and vaccum pressure if required.(i) Dampen all surfaces immediately ahead of application of Acrylic modified cemetitious coating.(j) While the surface is still damp from saturation (SSD), apply one coat of acrylic modified cementitious coating of Sika Top seal- 107/ Brush bond FOSROC/ Dr fixit / STP/ CICO of viscosity as per manufacturer's instructions.(k) Apply glass fabric sheet of Sika Fab 1 / FOSROC/ Dr Fixit/ STP while the first coat is wet. |
| 98 | (l) Once touch dry apply second coat of Acrylic modified cementitious coating of Sika Top Seal- 107/ Brush bond FOSROC/ Dr FiXit/ STP/ CICO of viscosity as per manufacturer's instructions on the entire area.(m) Second coat shall be applied after 6-8 hrs of application of previous coat and in the direction right angle to the previous coat.(n) The waterproofing coating should be taken to a height minimum 300mm above the finished floor level on the vertical surface.(o) It is essential to cure acrylic modified cementitious coating immediately after application (minimum 6-8 hrs drying) for a minimum of 3 to 5 days to ensure full cement hydration and to minimize cracking.(p) A protection plaster ( 12-15 mm thick) in CM 1:3 admixed with appropriate integral water proofing compound has to be applied on the walls upto a height of cementitious coating.(q) Providing and applying a protection screed of 50mm thick 1:4 cement sand mortar admixed with Sika Plastocrete over the applied water proofing coating on horizontal surfaces . Admixture :- Sika Plastocrete plus/ FPSROC/ Dr Fixit / STP/ CICO confirming to IS 2645.(r) All the corners and joints should be pretreated with elastic waterproofing sealing tape with a woven bonding mesh on each surface and an elastic expansions zone in the centre of make Sika Seal Tape S/FOSROC/Dr Fixit/STP.(s) The membrane has to be protected in accordance with the manufacturer's recommendations until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accordance with manufacturer's recommendations.(t) waterproofing treatment has to be carried out through applicators authorised.(u) The sunken portion shall be filled with PCC 1:5:10 type E-2 (using 40 mm stone aggregate) complete all as specified.Note :- Item No 122 (e) shall be deemed to be included in quotate rate and item 122 (d) & (u) shall be measured and paid seprately. For payment only floor area of treatment should be measured . |
| 99 | S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) of white colour including plastic water closet seat back closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, P or S trap, jet spray necessary inlet and outlet connections including syphonic action type low level PVC flushing cistern of 10 lit capacity make white in colour and PVC flush pipe 32mm dia complete. |
| 100 | M&L for providing PVC pipe as spout pipe heavy class of dia 40mm complete all as specified and directed. |
| 101 | M&L for providing PVC pipe as Over flow pipe heavy class of dia 40mm including all fittings and fixtures complete all as specified and directed. |
| 102 | S&F 40 mm PVC (SWR) bend complete all as specified and directed. |
| 103 | Demolition of brick tiles or terracing tiles, including single layer on roofs including PCC complete all as specified and directed. |
| 104 | M&L for 25mm thick plain cement concrete type B-1, 1:2:4 (12.5mm graded aggregate) as on roof paddings complete all as specified and directed. |
| 105 | M&L for rendering 10mm thick plaster in cement mortar 1:4 as onfair faces of brick or concrete surfaces on roof, rendering surfaces is fair finished even and smooth complete all as specified and directed. |
| 106 | M&L for preparation of newly plastered surface making surface completely dry and applying a coat of bitumen primer @ 0.40 ltr/sqm and after drying of primer apply APP modified water proofing membrane with non woven polyster reinforcement 3mm thick superior multipolymeric weighing not less than 3kg/sqm with properties of high penetration and centre core consisting of 90 micron high molecular high density polyethylene (MHHDPE) film consisting of five layers with a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm under and over the APP membrane laid with torching application to the surface complete and sealing the side as well as end laps (overlaps should not be less than 10 cm) and applying two coats of aluminium paint above APP membrane surface , complete all as specified and directed. |
| 107 | M&L for heat resistant terrace tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner complete all as specified and directed.. |
| 108 | S&F of brass CP sink mixer wall mounted for mixing of hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 109 | Taking down aluminium point wiring for light, fan, bell socket, power socket etc complete including fittings and fixtures removing from site and making good disturbed surfaces of walls, floors, etc ccomplete all as specified and directed. |
| 110 | M&L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC (FR) insulated cable in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.5 Sqmm insulated un-sheathed PVC insulated copper conductor common earth and connecting to earth dolly for :- |
| 111 | One light point controlled by one, one way switch complete all as specified and directed. |
| 112 | One fan point controlled by one, one way switch complete all as specified and directed. |
| 113 | One socket outlet 3 Pin, 5 Amp on independent board complete all as specified and directed. |
| 114 | One socket outlet 3 Pin, 5 Amp on same board complete all as specified and directed.. |
| 115 | One bell point controlled by one bell push complete all as specified and directed. |
| 116 | One light point controlled by two 2 -way switches complete all as specified and directed. |
| 117 | M&L for point wiring with 4.00 Sq mm single core multi-stranded copper conductor PVC (FR) insulated, unsheathed cable 1100 volt grade in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.50 Sq mm single core, multi-stranded copper conductor, PVC insulated, unsheathed cable for common earth and connecting for earth dolly for 5 pin, 15 Amp socket outlet on Independent board. |
| 118 | S&F of switch piano flush type single pole one way 5 Amp complete all as specified and directed. |
| 119 | S&F of switch piano flush type single pole one way 15 Amp complete all as specified and directed. |
| 120 | S&F of bell push flush type single pole one way 5 Amp complete all as specified and directed. |
| 121 | S&F of socket out let 2 in 1, 3 pin 5 Amp flush type complete all as specified and directed. |
| 122 | S&F of socket out let 2 in 1, 3 pin 15 Amp flush type complete all as specified and directed. |
| 123 | S&F of switch piano flush type single pole two way 5 Amp complete all as specified and directed.. |
| 124 | M&L for ceiling rose, surface bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body complete all as specified and directed. |
| 125 | M&L for bell multi music type, AC 230 Volts, single pole complete all as specified and directed. |
| 126 | Taking down old unserviceable flourescent tube light fitting 36/40 watt fluorescent tube light fittings direct to walls or roof as ordered and disconnecting electrically with the electrical system and all materials required for the same. The rates also include making good the same to match with the existing surface complete all as specified and directed.. |
| 127 | Supply, installation, testing and commissioning of 20 watt 4 ft long LED Batten housing made of extruded alluminium with milky white diffuser and inbuilt electronic driver system lumen output should be at least 1800 lumen with a CCT of 6000 K, power factor should be greater than 0.9 with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 complete all as specified and directed. |
| 128 | Taking down old unserviceable bulkhead fitting & supply & fix LED light fitting 1x9 watt/1x10 watt bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 129 | Taking down old unserviceable lamp holder and S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including LED lamp 09W complete all as specified and directed.. |
| 130 | Taking down old unsv DB and supply and fixing factory made sheet metal enclosure double door distribution board class IP-43 with 200 Amp rated copper bus bar 240 volts 8 way single pole and neutral link complete all as directed. |
| 131 | Taking down unserviceable MCB’s and supply & fix following type/rating MCB’s including necessary connection as under:- |
| 132 | S & F of MCB, 10 to 32 Amp, SP, 240 Volt complete all as specified and directed. |
| 133 | S&F of MCB, 40 to 63 Amp, SPN, 240 Volt complete all as specified and directed. |
| 134 | S&F of MCB TPN 16 To 32 AMP complete all as specified and directed. |
| 135 | S&F in repair TP&N vertical DB 4 way ,MCCB as Incomer with bus bars, neutral links, blanking plates complete all as specified and directed. |
| 136 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVCinsulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sqmm 02 core nominal cross section in service connections complete all as specified and directed. |
| 137 | M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size 19/20 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 6.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed. Note:- Three run of 6.00 Sqmm cable and one run of PVC Conduit shall be measured & paid as one unit.) |
| 138 | S&F in repair LED bldg security light fitting 35 W housing made out of die cast aluminum alloy with toughed glass, IP 65/66 protection having clamp for mounting on wall working on 240 V AC 50 Hz, 20 watts including fixed on wall with 02 Nos MS clamps and bracket made of 40 mm dia light grade GI pipe bend to shape. complete all as specified and as directed. |
| 139 | S&F in replacement exhaust fans of 230 volt 300 mm sweep ventilator DB bouble ball bearing heavy duty motor, metal blade with protection steel bird guard and roubst complete including M&L for providing/cutting the round hole of required size in wall finishing the same supply and grounting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 23/.0076 copper cable rubber insulated from ceiling rose to exhaust fan motor and writing MES No. with black synthetic enamel paint 2.0 cm high complete all as specirfied and directed. |
| 140 | S&F in repair exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm 5 blade, white colour, 230 volts single phase complete with fixing accessories, exhuast fan fans connecting up including provision of flexible copper conductor cable from ceiling rose/connector to fans, including material and labour for fan suitable size/shape for fixing of exhaust fan all as dircted. Note:- Unservceable exhaust fan to be deposited in E/M Yard |
| 141 | S&F of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |