|
| 1 | Taking down shutters of any description exc 1.0 Sqm and nexc 2 sqm and refixing in same opening complete all as specified and as directed. |
| 2 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 3 | Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles, all as specified . |
| 4 | M&L for PCC 1:2:4 Type B0 (using 12.5 mm graded aggregate) as in levelling course, haunching, coping and similar works of over RCC roof surface including rounded or chamferred on edges etc complete all as specified and as directed. |
| 5 | Taking up or down steel tubing and disconnection, for 15mm bore of pipes :- |
| 6 | Taking up or down steel tubing and disconnection, for 20mm bore of pipes :- |
| 7 | Taking up or down steel tubing and disconnection, for 25mm bore of pipes :- |
| 8 | Dismantling floor, hearth , wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 9 | M&L plain cement concrete Type C2 1:3: 6 (40mm graded aggregates) in foundations, filling in post of fencing, pcc sub-base and mass concrete complete all as specified and directed. |
| 10 | S&F framed work as in doors or gates or tank staging of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe.290.Gde-E-165 |
| 11 | M&L for pre-cast PCC solid block walling with cement concrete type C1 (1:3:6, using 20 mm graded crushed stone aggregrates) exc.10cm in width and setting in cement mortar 1:6, complete including demolition at old precast cement concrete block walling complete all as specified and as directed. |
| 12 | M&L Providing precast cement concrete solid building blocks (C1 1:3:6 mix type C1 using 20mm graded stone aggregates) 10cm thick (with plain or interlocking joints as directed) setting in 1:6 cement mortar, complete, in walls complete all as specified and as directed. |
| 13 | S & F in repairs Vitreous China EWC with P or S Trap including seat cover closed pattern with flat bottom and cover and MS CP hinging device, PVC flush bend pipe incl PVC Flushing Cistern 10 LITRE capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed. |
| 14 | S&F vitreous China squatting pan of pattern “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (including flushing cistern and flush pipe) complete all as specified and as directed. |
| 15 | S&F Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed. |
| 16 | S&F in repair PVC valveless, 10 ltrs, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed. |
| 17 | S&F in repair Brass CP mixer (sink or wash basin) for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. |
| 18 | S&F vitreous China clay wash hand basin of size 550x400mm with pedastal incl brackets for fixing complete all as specified and as directed |
| 19 | M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.11 sqm but n exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and directed. |
| 20 | M&L for Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed. |
| 21 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 22 | S&F in repairs Brass CP angular stop cock fancy type with Capstan heads of complete all as specified and directed. |
| 23 | S&F in repairs 20mm Gun metal, globe or gate vavles, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 24 | S&F in repairs 25mm Gun metal, globe or gate vavles, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 25 | S&F in repairs pillar tap 15 mm, chromium plated, fancy type complete all as specified and directed. |
| 26 | M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and directed. |
| 27 | M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and directed. |
| 28 | S&F PVC (SWR) bends 110mm dia complete all as specified and as directed. |
| 29 | S&F PVC (SWR) bends 75mm dia complete all as specified and as directed. |
| 30 | Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed. |
| 31 | Supply and Laying Steel Water Tubing 20mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed. |
| 32 | Supply and Laying Steel Water Tubing 25mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed. |
| 33 | M&L for cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and directed. |
| 34 | S&F Stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 35 | S&F PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed. |
| 36 | S&F steel connections 15mm size with CP Nuts of length 450mm and fixed, complete all as specified and as directed. |
| 37 | Supply hoisting and fixing rotational moulded HDPE water storage tank after disconnecting of old tank,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 1000 ltrs in position incl float valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed incl dismantling of tank all as specified and directed. |
| 38 | S&F Bib taps cast copper alloy with crutch or butterfly handle , screwed down for iron pipe fancy type chromium plated complete all as specified and directed. |
| 39 | M&L 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 40 | Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 41 | M&L for rendering 15m thick on fair faces of brick or concrete work in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 42 | Supply only Integral waterproofing compound complete all as specified and directed. |
| 43 | M&L complete removal of existing treatment on walls surface and preparation of old walls surface and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed. |
| 44 | M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed. |
| 45 | S&F Brass chromium plated shower roses with or without swivel joints, of 125mm size, including fixing to steel pipe or union complete all as specified and as directed. |
| 46 | S&F sheet glass shelf assembly shelf consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 47 | S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, incl brackets complete all as specified and as directed. |
| 48 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 49 | S&F brass CP 2-in-1 bibcock with flange complete all as specified and directed and as directed. |
| 50 | S&F toilet paper holder with flat recessed type stainless steel Complete all as specified and directed and as directed. |
| 51 | S&F brass CP mixer for mixing hot & cold (2-in-1wall mixer) water screwed down for iron pipe and fixed complete all as specified and directed. |
| 52 | M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.06 sqm but n exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement Laid over and including15 mm thick cement screed bed in CM 1:6 inld demolition and removing debris etc complete all as specified and directed. |
| 53 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm thickness (below/above ground level) complete all as specified and as directed. |
| 54 | M&L 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in hardstanding, path, plinth protection, sub-floors etc finished even and fair or even and rough as reqd complete all as specified and directed |
| 55 | M&L for rendering 15mm thick in CM (1:4) in two coats (10mm and 5mm thick) mixed with water proofing compound with 5mm thick layer on fair faces of brick work or concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately complete all as specified and as directed. |
| 56 | M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and as directed. |
| 57 | S&F in repair for grating doom 100mm dia of PTMT (minimum weight 25gms) complete all as specified and directed. |
| 58 | M& L for Laying of 16mm dia Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. |
| 59 | M& L for Laying of 20mm dia Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. |
| 60 | Refixing 20mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) including provision of new GI fitings complete all as specified and as directed. |
| 61 | S&F in repairs including making hole and sealing properly PVC (SWR) Pipes single socketed in any length with rubber ring joints, 110 mm bore fixed to walls complete all as specified and as directed. |
| 62 | S&F in repair including making hole and sealing properly PVC(SWR) pipes 75mm dia single socketed in any length with rubber ring joints fixed to walls/floor complete including clamps for securing pipe complete all as specified and directed. |
| 63 | S&F in repair including making hole and sealing properly PVC (SWR) vent cowl 75mm dia complete all as specified and as directed. |
| 64 | S&F in repairs PVC (SWR) bend with access door of any radius 110mm bore complete all as specified and as directed. |
| 65 | S&F in repair PVC (SWR) 110mm dia in junction single , (Single T) equal or unequal complete all as specified and as directed. |
| 66 | Repair to sunken per 1 sqm floor area including taking down plater/rendering, cleaning, sweeping removing dust and mud, or water, cleaning sunken surfaces of complete all as specified and as directed.bothroom/toilet etc and filling or levelling of floor surface by concrete (1:2:4, with WPC over 0.90mm polythene sheet) CM 1:3 rendering and neeru finish to plastering as specified and make sure sunken is water proof by ponding test of 48 hrs complete all as specified and as directed. |
| 67 | Taking down chowkats or frames n. exc 1.50 Sqm each with shutters (without taking off shutter from the frames) complete all as specified and directed. |
| 68 | Demolition of Brickwork/solid concrete block work built in Cement mortar complete all as specified and directed. |
| 69 | Dismantling boarding of any description (board/plywood) fixed in any position with screw, complete all as specified and directed. |
| 70 | S&F WPC board, factory made 18mm thick single extruded WPC (Wood Polymer Composit) Solid Board having density not less than 600 kg/ Cbm one side white and other side of board laminated with PVC Foil including finishing all edges at all level for making edge lipping /beading or .50 mm thick PVC sheet lipping at all 4 edgesusing binding tape, Solvent, screws, stainless steel, Piano hinges / self closives box type hinges etc Manufactured by ISO 9001-2008 certified company complete all as specified and directed. |
| 71 | S&F continuous (Piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30 mm, complete all as specified and directed. |
| 72 | S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified and directed. |
| 73 | Supply and fix Extruded brass bow handles, of 125 mm size, fabricated type, polished complete all as specified and directed. |
| 74 | S&F solid PVC door frame of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specifiecation complete all as specified and directed. |
| 75 | S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the fram at site as per specification and drawing complete all as specified and directed. |
| 76 | S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 100mm complete all as specified and directed. |
| 77 | S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed |
| 78 | S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed. |
| 79 | S&F for powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete as complete all as specified and directed. |
| 80 | M&L for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and complete all as specified and directed. |
| 81 | S&F 3 mm thick figured glass, pin head type and glazing with oil putty or wooden beads in squares n.exc 0.5 sqm in each pane complete all as complete all as specified and directed. |
| 82 | Taking down plastering on lathing (other than wire-netting), without removing lathing, in lime or cement mortar (one side only measured in cases where both sides are plastered complete all as specified and directed. |
| 83 | M&L for rendering 15mm thick on fair faces of lathing wall in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 84 | M&L for preparing newly plastered surfaces of wall and applying two coats of oil bound distemper with roller over a coat of primer complete all as specified and directed. |
| 85 | Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 86 | M&L for 25 mm thick Cement concrete type B-1, 1:2:4 (using 20mm graded aggregate complete all as specified and directed. |
| 87 | S&F in repairs bevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commericial ply wood and fixed to wooden plugs with CP brass screw and cup washer complete all as specified and directed. |
| 88 | S&F in repairs Vitreous China Wall hung WC with PP Normal close seat cover,hinges and accessories Set including concealed in wall flushing cistern, Size 430x580x410mm P- trap, 220mm cat part 120530 Somany or equivalent in make cera, parryware or Hindware complete all as specified and directed. |
| 89 | S&F in repairs vitreous China clay table top WHB of make Jaguar Cat Part No:-ARS-WHT-39903 size 700x435x135 mm incl waste coupling of complete all as specified and directed. |
| 90 | S&F in repairs Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia complete all as specified and as directed. |
| 91 | M&L for Black Granite slab 20 mm thick rubbed and polished machine cut, set in cement mortar jointed with white cement complete including bedding layer 20mm thick in cement mortar 1:6 over cooking platform & making hole for gas pipe etc through precast RCC slab & granite stone etc incl rounding of exposed edges, complete all as specified.Note:- Colour of Granite approved by the direction of Garrison Engineer. |
| 92 | M&L for 12mm toughened glass wall mounted Urinal partition with complete fitting accessories complete all as specified and directed. |
| 93 | S&F in repair Health faucet(ABS Body)mild steel chroumium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 94 | S&F in repairs Soap dish holder of complete all as specified and directed. |
| 95 | S&Fin repairs Towel ring square shape stainless steel of complete all as specified and directed. |
| 96 | S&F in repairs corner glass shelf with bracket of complete all as specified and directed. |
| 97 | M& L for preparing old decorated surfaces of wall and applying two coats of oil bound distemper on old wall surface with roller brush complete all as specified and directed. |
| 98 | S&F stainless steel gratings 150mm bore size fixed with cement motar complete all as specified and directed. |
| 99 | Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified and directed. |
| 100 | Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/fan point controlled by one switch. |
| 101 | Description all as per Srl item No. 100 here in before but for socket outlet point 5 Amp on Independent board complete all as specified and directed. |
| 102 | Description all as per serial item No 100 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified and directed. |
| 103 | Supply and fixing modular switch 1 way 6 A with cover plate and frame 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. |
| 104 | Supply and fixing modular switch 1 way 16 A with cover plate and frame230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. |
| 105 | Supply and fixing modular sockets with cover plate and frame 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed. |
| 106 | Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module with cover plate and frame 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. |
| 107 | Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified and directed. |
| 108 | Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC, 6500/3000K recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as direcetd.Note: (i) All fittings must be mentioned CA No. and date of installation with permanent marker |
| 109 | Supply and fixing LED batten fittings 1x18 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one.complete all as specified and directed. |
| 110 | Supply & fix lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings complete all as specified and as directed. |
| 111 | Supply and fix 9 Watt LED bulb including taking down old unserviceable one complete all as specified and as directed. |
| 112 | S & F Exhaust fan 230 volts , 300mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall complete all as specified and directed. |
| 113 | Supply and fix in repairs MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. |
| 114 | Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed. |
| 115 | Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's.complete all as specified and directed. |
| 116 | M & L Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion including taking down old wiring etc complete all as directed. Note: (i) Two runs of 4 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted. Please Enable Macros to View BoQ information |