|
| 1 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings |
| 2 | Supply and fix for pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 3 | Supply and fix for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 4 | Dismantling timber framed work scantlings 40 sq.cm and over in section, in any position. |
| 5 | Description all as per ser No 18 above but in fillets, rails, posts, rafters, purlins etc under 40 sq. cm in section. |
| 6 | Supply and fix rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe-410 W(Gde E-250) quality B complete all as specified and as directed. |
| 7 | Supply and fix steel work in tubular trushes including special shaped washer etc complete using ERW or induction but welded tubes confirming to I.S. 1161-1979 grade St. 240 etc as in purlins complete all as specified and as directed. |
| 8 | Material and labour preperation of new steel surfaces of any desciption over 10 cm in width or girth not other wise descibed and applying two coats of synthetic enamell paint over a coat of red oxide complete all as specified and as directed. |
| 9 | Taking down Chowkats or frames with shutters without taking of shutters from the frames exc 1.5 Sqm but not exc 4 Sqm each including all as specified and as directed. |
| 10 | Taking down Chowkats or frames with shutters without taking of shutters from the frames not.exc 1.5 Sqm each all as specified and directed |
| 11 | Supply and fix for powder coated aluminium sliding windows having three Nos of tracks including one wire glazed shutters for mosquito proofing including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm and two Nos glass shutters including 4mm thick coloured glass and aluminium section weight n.less than 0.55 Kg/RM including necessary cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable handles, locking arrangement and fixed to stone masonry wall complete all as specified and as directed.NOTE :- colour of powder coating should be brown / wood grain in colour. |
| 12 | Supply and fix for powder coated anodised aluminium ventilator shutters, fixed type without sash bar including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.and fixed to stone masonry wall including demolition of RCC jali ventilators complete all as specified and as directed. |
| 13 | Supply and fix factory made 35 mm thick plain framed panelled shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with Commercial veneered on both faces the size of rail and style as per IS-1003 ( Pt-I) kiln seasoned and chemically pressed of 2nd class hard wood complete all as specified and as directed.. |
| 14 | Supply and fix 30mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 15 | Supply and fix for pressed steel door frames of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete all as specified and as directed. |
| 16 | Description all asper item no 15 above but size 125 x 60 mm complete all as specified and as directed. |
| 17 | Material and labour for PCC 1:2:4 type B1 in door frame filling complete all as specified and as directed. |
| 18 | Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown on Page No. 160 of SSR 2010 part II. complete all as specified and as directed. |
| 19 | Supply and fix 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge. |
| 20 | Supply and fix factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified and as directed. |
| 21 | Supply and fix galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. |
| 22 | Supply and fix in repairs butt Hinges medium weight cold rolled stainless steel 100 mm long complete all as specified and as directed. |
| 23 | Supply and fix 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed. |
| 24 | Supply and fix for extruded aluminium alloy handles 150 mm, fabricated type, anodised complete all as specified and as directed. |
| 25 | Supply and fix for mild steel sliding door bolts, plate type, with stainless steel bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long complete all as specified and as directed. |
| 26 | Supply and fix for mild steel sliding door bolts, plate type, with stainless steel bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 200mm long complete all as specified and as directed. |
| 27 | Dismantling of floor hearth or wall tiling including cm bedding (but not backing) removing serviceable tiles in store rubbish of the premises complete all as specified and as directed. |
| 28 | Material and labour for double charged vitrified ceramic tiles 7-9 mm thick light shade, (square/rectangular) polished, area of each tiles exceeding 0.18sqm but not exceeding 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 29 | Material and labour for double charged vitrified coloured tiles in vertical/skirting surface 7-9 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coat complete all as specified and as directed. |
| 30 | Material and labour for 25 mm thick cement concrete in level course for receiving floor tiles using Type B1,1:2:4 (20 mm graded aggregate) complete all as specified and as directed. |
| 31 | Material and labour for non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding .11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 32 | Material and labour for Glazed ceramic coloured tiles in vertical surface 300x600 of 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coat complete |
| 33 | Taking down cement plaster on wall /concrete surface etc including racking out joints hacking for key scrubing down with water etc all as specified and directed. |
| 34 | Material and labour for Precast cement concrete block masonry using type C1 1:3:6 (20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar1:6 complete all as specified and as directed. |
| 35 | Material and labour for rendering 15 mm thick on faces of brick/ PCC block masonry wall using cement plaster 1:4 and rendering is to be finished even and smooth (without using extra cement) complete all as specified and as directed. |
| 36 | Material and labour for rendering 10 mm thick on fair faces brick work /PCC block masonary or concrete surface of wall using cement plaster 1:6 and finished even and smooth (without using extra cement) complete all as specified and as directed. |
| 37 | Material and labour preparation of newly plastered surface and applying two coat of cement base paint on wall including priming plastered and other surfaces with alkali resistant priming paint etc complete all as specified and as directed. |
| 38 | Material and labour preparation of newly plastered surface and applying two coat of oil bound Distemper over a coat of primer on wall etc complete all as specified and as directed. |
| 39 | Material and labour providing and applying 2 mm thick plaster of paris putty on wall over plastered surface to prepare the surface even and smooth complete all as specified and as directed. |
| 40 | Supply and fix tubes 15mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed. |
| 41 | Supply and fix tubes 20 mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed. |
| 42 | Supply and fix n repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) all as per makes specified in PS complete all as specified and as directed. |
| 43 | Supply and fix in repairs plastic water closet seat cover, coloured, for pedestal pan closed pattern with flat bottom,and cover with mild steel chromimium plated or aluminised hinging device complete all as specified and as directed. |
| 44 | Supply and fix in repair angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down , screwed both end for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed. |
| 45 | Supply and fix Vitreous china wash basin white flat back size 550x400 mm excluding taps but including 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets all as per makes specified in PS complete all as specified and as directed. |
| 46 | Supply and fix in repairs 15 mm bore pillar taps, cast copper alloy fancy type, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe all as per makes specified in PS complete all as specified and as directed. |
| 47 | Supply and fix sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 48 | Supply and fix in repairs bib taps 15mm dia, cast copper alloy chromium plated, with CP flange makes specified in PS complete all as specified and as directed. |
| 49 | Supply and fix in repairs stop valve fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle,15mm bore size screwed both ends for iron pipe or for unions and fittings all as per makes specified in PS complete all as specified and as directed. |
| 50 | Supply and fix in repair for CP Health Faucet ABS Body with 1 Meter Flexible tube & Hook complete all as specified and as directed |
| 51 | Supply and fix in repairs soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 52 | Supply and fix in repairs PVC valveless, syphonic action type, flushing cistern, 10ltr capacity,low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, all as per makes specified in PS fixed complete all as specified and as directed. |
| 53 | Supply and fix in repairs PVC (SWR) gully trap 125/110mm setting and jointing in solvent cement complete all as specified and as directed. |
| 54 | Material and labour 75mm bore PVC(SWR) pipe, type 'B' single socketed in any length with rubber ring joints laid in trenches or floors fixed in repairs all as specified and as directed. |
| 55 | Material and labour 110 mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints fixed to wall including PVC clamps and necessary fittings fixed in repairs complete all as specified and as directed. |
| 56 | Supply and fix 100 mm bore cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) PVC (SWR) fixed in repairs complete all as specified and as directed. |
| 57 | Dismantling of wall and ceiling boards (fibre, pulp insulation, Ac etc), any thickness including cover fillets complete all as specified and as directed. |
| 58 | Supply and fix interlocking aluminium alloy anodised snap grid consists of main Tee runners of size 38mm x25mm x1.5mm spaced 1200mm centre to centre and cross Tee of size 25mmx25mmx 1.5mm, 1200mm long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mmx600mm and provide a secondary cross tee 25mm x1.4mm ( of length 600mm) to be interlocked of the centre of 1200mmx600mm panel to form a grid of 605mmx605mm and wall angle 25mmx25mmx 2mm. Aluminium alloy extruded section shall be aluminium anodised (minimum 15 micron ) and shall conform to IS 733, IS 1285 and IS 737. including Hangers of GI wire 6mm dia to be fixed by approved rawl plug, level and justers and screws etc. |
| 59 | Material and labour for 8-9 mm thick Gypsum board/tiles for insulation and accoustic purposes, 60cmx60cm in size , fixed with nails to timber frame work or with staples on snap grid in ceiling complete all as specified and as directed. |
| 60 | Supply and fix for frame work such as grill, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed. |
| 61 | Demolition of stone slabs/flooring of any description laid bedded and pointed any mortar and all as directed. |
| 62 | Material and labour for granite slab/window sill & jamp, daddo machine cut for 20 mm thick bedded and jointed with colour cement to match cut to shape required all as specified and as directed. |
| 63 | Material and labour for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including Material and labour for screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and as directed. |
| 64 | Demolition/ Dismantling of stone slab and tiles of any description or thickness in floors, apronlaid bedded and pointed in any mortar etc complete all as specified. |
| 65 | Material and labour for 25 mm thick sand filling under floors or foundations including watering and consolidation complete all as specified and directed. |
| 66 | Material and labour for 75 mm thick PCC 1:4:8 type D2 in sub base complete all as specified and as directed |
| 67 | Material and labour for providing 60 mm thick machine pressed precast concrete interlocking paver blocks of any shape and size conforming to IS-15658-2006,with grey cement and pigment,rubber moulded tiles M-35 Grade, as in floors, paving,path etc.complete all as specified and as directed. |
| 68 | Supply and fix rotational moulded polyethylene water storage tanks three layer having capacity 500 litres ( cylindrical vertical with closed top ) hoisted and fixed in position including dismantling and removing of old tank complete all as specified and as directed. NOTE :- ISI mark should be embossed on tank. |
| 69 | Demolition and breaking up drain pipes ( salt glazed ware AC/RCC) drain pipes set in cement mortar, dia of pipe 200mm. |
| 70 | Excavating in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth; for foundation etc or for manholes, laying pipes etc and getting out in hard / dense soil. |
| 71 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed (below or above GL) |
| 72 | Demolition of precast concrete block walling built in cement mortar as in manhole including PCC coping. |
| 73 | Demolition of reinforced cement concrete manhole covers n. exc. 15cm thickness below or above G. level. |
| 74 | Material and labour for cement concrete type C-2,1:3:6 using 40 mm graded coarse aggregate as in concrete bed to drain pipes including packing under & haunching against sides of pipes after they are laid and tested for 200 mm complete all as specified and as directed. |
| 75 | Material and labour cement concrete (1:4:8) type D - 2 using 40 mm graded coarse aggregate in foundations filling & mass concrete complete all as specified and as directed. |
| 76 | Material and labour for reinforced concrete pipes, 200 mm bore, Class NP-2, laid and jointed complete with collars complete all as specified and as directed. |
| 77 | Material and labour for PCC 1:2:4 Type B-1 using 20 mm graded coarse aggregate in coping including necessary formwork and benching in bottom of manholes drain etc complete all as specified and as directed.. |
| 78 | Material and labour rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces and finishing the surfaces even and smooth without using extra cement including 3% WPC complete all as specified and as directed (WPT shall be measured separately). |
| 79 | Supplying only integral water proofing compound complete all as specified and as directed. |
| 80 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed. |
| 81 | Returning, filling in hard / dense soil spreading, levelling, watering and well ramming in layers n. exc. 25 cm complete all as specified and as directed. |
| 82 | Removing excavated soil n. exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and as directed. |
| 83 | Material and labour for precast cement concrete 1:2:4 type B-1 (using 20 mm graded coarse aggregate) in cover slab set in CM 1:6 complete all as specified and as directed. |
| 84 | Material and labour for mild steel TMT bars 6 mm to 8 mm dia, cut to length, bend to shape required, including cranking, bending and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed. |
| 85 | Supply and fix in repair two way angle cock with flange cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed. |
| 86 | Material and labour for 75 mm thick PCC 1:3:6 type C1 as in Plinth protection complete all as specified and as directed. |
| 87 | Taking down copper/aluminium point wiring ( light, fan, socket, power ) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surface of walls, floors, etc all as specified and as directed. |
| 88 | Taking down carefully submain wiring any size all as specified and as directed. |
| 89 | Taking down DB including MCCB/MCB any type any size all as specified and as directed. |
| 90 | Material and labour for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one light point or one fan/Ex fan point and bell point. controlled by one, one way switch including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc all as specified and as directed. |
| 91 | Description all as per item no 90 above for One three pin 5 Amp socket outlet point with cables 1.5 sqmm size on independent bord complete all as specified and as directed. |
| 92 | Description all as per item no 90 above for One three pin 5 Amp socket outlet point , with cables 1.5 sqmm size on same bord complete all as specified and as directed. |
| 93 | Description all as per item No 90 above but FRLSH copper stranded cable of size 2.5 sq mm for 3/6 pin socket outlet 15 amp on one independent board. alongwith all fitting and accessories complete all as specified and as directed. |
| 94 | Material and labour for sub main wiring with two single core PVC insulated multi stranded FRLSH Copper conductor cable of size2 X 4.0 sqmm drawn through in and including PVC Conduit with all accesories and one single core green colour FRLSH Copper conductor cable of size 1X 4.0 sqmm as earth wire and connected to earth dolly and making good to disturbed surfaces complete all as specified and as directed.NOTE :- (a)Two run of cable with one run of earth wire and one run of casing capping will be measured as one unit (RM) |
| 95 | Supply and fix 5 Amp switch piano flush type single pole one way all as specified and as directed. |
| 96 | Supply and fix angular Lamp holder of PVC/ Polycarbonate type with back plate complete all as specified and as directed. |
| 97 | Supply and fix call bell electric, ding dong, AC 240 volt, 50 HZ. incl dismantling taking down unsv one all as specified and as directed. |
| 98 | Supply and fix bell push piano type one way 240 volt incl dismentling taking down unsv one complete all as specified and as directed. |
| 99 | Supply and fix socket flush type 6 amps, 5 pin, 230v complete all as specified and as directed. |
| 100 | Supply and fix switch socket combination multipurpose 2-in-1 flush type 3 pin 16 amps and 3 pin 6 amps, 230v complete all as specified and as directed. |
| 101 | Supply and fix ceiling rose surface Bakelite three terminal complete all as specified and as directed. |
| 102 | Supply and fix Sheet metal Enclosure SPN 08 way (MCB DB) Double door, 240 Volts AC complete all as specified and as directed. |
| 103 | Supply and fix vertical MCB distribution board, as MCB TPN incomer, IP 43 protection, Double door, metal enclosure, TPN, 415 Volts, 4 way incl dismantling taking down unsv one complete all as specified and as directed. |
| 104 | Supply and fix MCB TPN 40 to 100 Amps, 415 volt 10 KA complete all as specified and as directed. |
| 105 | Supply and fix MCB, SPN (Double Pole) 32 amps, 240 Volts, 10 KA ‘’C” curve complete all as specified and as directed. |
| 106 | Supply and fix MCB, Single Pole, 5 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve complete all as specified and as directed. |
| 107 | Supply and fix LED Light batten 20 watt, 4 feet AC sleek and seamless profiled extruded polycarbonate batten with an efficient diffuser to illuminate work and retail spaces with three core flexible copper conductor cable from ceiling rose complete all as specified and as directed. |
| 108 | Supply and fix LED lamp 12 watt, CDL, B-22 (Pin type), 230V, PF-0.95 (min) complete all as specified and as directed. |
| 109 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. |
| 110 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.0 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. NOTE :- Old UNSV ceiling fan deposit to MES store |
| 111 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers incl making of suitable hole in brick / stone wall for fixing of exhaust fan complete all as specified and as directed.NOTE :- Old UNSV Exhaust fan deposit to MES store |
| 112 | Material and labour for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on complete all as specified and as directed. |
| 113 | Supply and fix electric water heater, storage type steel body with glass inner tank and heating element upto 1.5 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and as directed. |
| 114 | Supply, lay and testing 15mm bore medium grade galvanized Pipe incl Cutting of existing pipe and connecting in all fitting such as tee bends union elbow reducer etc for connection of water supply for geyser complete all as specified and as directed. |
| 115 | Supply and fix stop valve 15mm bore screwed both ends for concealed pips or unions or fittings complete all as specified and as directed. |
| 116 | Supply and fix bib cock 15mm bore screwed both ends for concealed pipes or union or fittings complete all as specified and as directed. |
| 117 | Supply and fix for copper connection pipe 15mm dia 450mm long with brass union both ends suitable for Hot/Cold water for geyser complete all as specified and as directed. |
| 118 | Supply, laying and testing cable XLPE insulated screened pvc bedded galvanised steel strip or wire armoured electric power cable (heavy duty )1100 volts grade with stranded aluminium conductor of size 4 core 16 sq mm complete all as specified and as directed. |
| 119 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying of cable and getting out in soft loose soil complete all as specified and as directed. |
| 120 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying of cable and getting out in soft disintegrated rock complete all as specified and as directed. |
| 121 | Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and as directed. |
| 122 | Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point. |
| 123 | Supply and lay double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to IS 16205 & IS14930 ( Part I and II) for protection of underground cable of size 20 mm outer dia with all fittings such as clamps. coupler etc laid in trenches / road/ nallah or fixed along wall. poles or laid under floor (including cutting floor/Road and making good to match with existing adjoining surface etc for cable protection all as specified (excavation and earth work shall be measured and paid separately) |
| 124 | Material and labour for road cutting upto 300mm deep and 200mm wide for crossing GI water pipe line through road including making good the disturbed surface by filling mass concrete complete all as specified and as directed. |
| 125 | Material and labour for Cement concrete in foundations, filling and mass concrete of type D2 1:4:8 (40mm graded aggregate), complete all as specified and as directed. |
| 126 | Cutting existing GI water pipe line 40/50 mm dia in position for inserting tee/specials for branch connection of 40 mm size complete all as specified and as directed. |
| 127 | Material and labour for Laying in trenches/fixed to wall galvanised steel water tubing 20 mm bore, medium grade with and including all medium grade fittings complete all as specified. |
| 128 | Description all as item no.02 above but 40 mm bore pipes. |
| 129 | Supply and fix in repair gun metal gate valve with iron wheel head, screwed both ends for iron pipes 20mm bore complete all as specified and directed. |
| 130 | Supply and fix in repair gun metal gate valve with iron wheel head, screwed both ends for iron pipes 40mm bore complete all as specified and as directed. Please Enable Macros to View BoQ information |