|
| 1 | Dismantling Single or double layer Mangalore pattern or similar tiles on ridge/roofing complete all as specified and as directed. |
| 2 | Supply and fix roof tiles , mangalore pattern, inter locking at side joints laid dry complete all as specified and as directed. |
| 3 | Description all as per item No 2 above but (except) Mangalore tiles complete all as specified and as directed. NOTE :- Material shall be used from dismantling. |
| 4 | Supply and fix ridge or hip tiles to suit mangalore pattern of roofing tiles bedded and jointed in CM 1:6 complete all as specified and as directed. |
| 5 | Description all as per item No 4 above but (except) Mangalore tiles complete all as specified and as directed.NOTE :- Material shall be used from dismantling. |
| 6 | Dismantling of plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering complete all as specified and directed. |
| 7 | Supply and fix 0.63mm thickness Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts and washers, in roofs(in any position and bent to any radius curve), walls etc. with grade of zinc coating 275 etc complete all as specified and directed. |
| 8 | Supply and fix for plain, galvanised mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) by using 1.00mm thick sheet grade of zinc coating @120 Gms/Sqm both sides and welded or soldered joints are provided complete all as specified and as directed. |
| 9 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles and removing the debris outside the defence land complete all as specified and as directed |
| 10 | Material and labour brick work with fly ash old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 in any position, complete all as specified and as directed. |
| 11 | Material and labour for 15mm thick rendering on fair faces of concrete surfaces in CM 1:6 finishing even and smooth without using extra cement complete all as specified and as directed. |
| 12 | Dismantaling timber in scantling 40 sq.cm and over in section in any position and any description unframed wk or unframed work. |
| 13 | Dismantaling battens for tiles, singles etc of any size including tiling fillets spaced exc.15 cm complete all as specified and as directed. |
| 14 | Dismantling timber scantlings in fillets, rails, posts, rafters, purlins etc under 40 sq. cm in section (Unframed work) in any position complete all as specified and as directed. |
| 15 | Supply and fix timber work second class hard wood clean sawn in scantlings, complete all as specified and directed. |
| 16 | Supply and fix for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 -W (Gde-E- 250) quality-A etc complete all as specified and as directed. |
| 17 | Supply and fix for gypsum reinforced boards 595x595x8 to 10mm thick for ceiling on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction including taking down old/existing ceiling boards of any type (fibre, pulp insulation etc) or insulation boards any thickness incl fillets complete all as specified and as directed. |
| 18 | Taking down chowkhat or frame n. exc 1.5 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed. |
| 19 | Taking down chowkhat or frame exc. 1.5 Sqm but n. exc 4 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed. |
| 20 | Supply and fix aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with and including two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc complete all as specified and as directed. |
| 21 | Supply and fix for 35mm thick 2nd class hard wood factory maid plain, framed paneled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm venered partical board with commercial veneering on both side faces. The size of rail and stile as per ISI 1003 (Part-I), kiln seasoned and chemically pressure treated (factory made shutter) complete all as specified and as directed. |
| 22 | Supply and fix for 35mm thick 2nd class HW glazed and skelton shutter, wire mesh, open rebated and prepared to receive glass, gauze, etc. (without sach bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge, etc size of shutters including wire mesh as specified in SSR-I, complete all as specified and as directed. |
| 23 | Supply and fix factory made solid PVC Door Frame of size 50mm x 47mm single revated made out of extruded 5mm plain colour PVC sheet reinforced with M.S. Square tube etc complete all as specified and as directed. |
| 24 | Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame etc complete all as specified and as directed. |
| 25 | Material and labour for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and poited in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed. |
| 26 | Material and labour for Glazed coloured ceramic tiles External/Internal in vertical surface 300mm x 450mm x 7mm/300mmx600mmx7mm thick over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and directed. |
| 27 | Material and labour for Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and poited in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed. |
| 28 | Description all as per ser item No 27 above but in skirting and dado laid over and incl 10mm thick rendering in CM 1:4 and pointing including dismantiling and removing the debris outside the defence land complete all as specified and as directed. |
| 29 | Material and labour for cement concrete 25mm thick type B-0, 1:2:4 (12.5mm graded aggregate) as in flooring complete all as specified and as directed. |
| 30 | Supply and fix butt hinges, 150mm long, extruded aluminium alloy with galvanised mild steel hinge pin, complete all as specified and as directed. |
| 31 | Supply and fix extruded brass handles, fabricated type polished 150mm long fixing with screws etc complete all as specified and as directed. |
| 32 | Supply and fix aluminium anodised , barrel tower bolt 200mm long, powder coated of extruded section and fixed complete all as specified and as directed. |
| 33 | Supply and fix aluminium alloy, anodised, sliding door bolt 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy 12mm dia, complete all as specified and as directed. |
| 34 | Material and labour for 15mm thick rendering on brick /concrete or dubbed surface in CM 1:4 with water profing compound finishing even & smooth without using extra cement and similar like at any height including necessary scaffolding , ladder & formwork including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside defence land complete all as specified and as directed. NOTE :- Water proofing compound shall be measured & paid separetely |
| 35 | Material and labour for 15mm thick rendering on brick /concrete or dubbed surface in CM 1:6 with finishing even & smooth without using extra cement and similar like at any height including necessary scaffolding , ladder & formwork including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside defence land complete all as specified and as directed. |
| 36 | Material and labour for preparation of new or previously untreated wooden surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 37 | Material and labour for preparation of new or previously untreated steel surface of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 38 | Material and labour for preparing new plastered surface of walls and applying two coat of cement base paint oaver a coat of primer at any height including necessary scaffolding ladder etc complete all as specified and as directed. |
| 39 | Material and labour for preparing new plastered surface of walls and applying two coat of oil bond distemper of alkali resistant primer at any height including necessary scaffolding ladder etc complete all as specified and as directed. |
| 40 | Material and labour for preparation of old plastered or unplastered surface of wall and applying two coat of oil bond emulsion overa coat of alkli resistant primer, white or tinted complete all as specified and as directed. |
| 41 | Material and labour for preparation of old wood or wood based surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 42 | Material and labour for washing, rubbing down and stopping of distempered and painted surfaces of manglore tile, and applying two coats of exterior acrylic emulsion paint over one coat of exterior primer complete all as specified and as directed. |
| 43 | Supply and fix 15mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed. |
| 44 | Supply and fix 20mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed. |
| 45 | Supply and fix in repairs for chromium plated brass angle valve for 15mm bore pipe, fixed complete all as specified and as directed. |
| 46 | Supply and fix in repairs bib tap, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specified and as directed. |
| 47 | Supply and fix in repair stop valves cast copper alloy CP fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia all as specified and as directed. |
| 48 | Supply and fix in repairs for PVC connection 15mm dia and 45cm long with 2 Nos PTMT nuts, fixed complete all as specified and as directed. |
| 49 | Supply and fix in repairs for fancy pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure , with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed for 15mm bore etc complete all as specified and as directed. |
| 50 | Supply and fix in repairs for vitreous china wash basin, white, flat back size 550x400 excluding taps, waste chain and plug and porecelain stopper but including bracket any size and waste coupling of PTMT, including cutting for and pinning in ends of bracket or erecting stand execlusive of fixing of supply and waste pipe etc fixed complete all as specified and as directed. |
| 51 | Supply and fix in repair rotational moulded polythylene water storage tanks 1000 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specifed in SSR Part I complete all as specified and as directed. |
| 52 | Supply and fix in repair for vitreous china squatting pan, orissa pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including 'P' or 'S' trap & PVC flushing bend fixed complete all as specified and as directed. |
| 53 | Supply and fix in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 54 | Supply and fix in repairs for 75mm bore PVC (SWR) pipe single socket in any length with rubber ring joints, laid in trenches, wall, floors or laid in sunken floor etc complete all as specified and as directed. |
| 55 | Supply and fix for 75mm bore PVC bends, branch piece or similar fitting are reqd to make the system functional complete all as specified and as direced. |
| 56 | Supply and fix for PVC floor trap 75mm complete all as specified and as directed. |
| 57 | Supply and fix in repair for 110mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors or fixed on wall etc complete all as specified and as directed. |
| 58 | Supply and fix in repair for 110mm bore PVC (SWR) bends, branch piece or similar fitting are required to make the system functional complete all as specified and as directed. |
| 59 | Supply and fix for 110mm bore PVC (SWR) junction single, (Single T), equal or unequal fitting as reqd to make the system functional complete all as specified and as directed. |
| 60 | Supply and fix for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 61 | Supply and fix galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. |
| 62 | Supply and fix in repair harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and as directed. |
| 63 | Supply and fix in repair for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed. |
| 64 | Supply and fix in repair stainless steel soap dish, any type and size, fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 65 | Supply and fix in repairs for PVC valveness, symphonic action type, flushing cistern 10 liters capacity, low level, white with inlet ball valve, float and handle including brackets complete all as specified and as directed. |
| 66 | Supply and fix in repairs for vitreous china wash down water closet pan, pedestal pattern, white, including PVC flush pipe fixed complete including connection to existing cistern including 'P' or 'S' trap complete all as specified and as directed. |
| 67 | Supply and fix in repairs for PVC waste pipe 32mm dia, complete with 80cm long flexible for WHB/Urinals fixed complete all as specified and as directed. |
| 68 | Taking down copper/aluminium point wiring ( light, fan, socket, power ) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surface of walls, floors, etc complete all as specified and as directed. |
| 69 | Material and labour for point wiring complete with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLSH cable 1100 Volts grade drawn through in and including PVC casing caping of required size with all fittings and accessories alongwith green colour FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc complete all as specified and as directed. for the following:-(a) One light point /fan/Ex fan/bell point controlled by one switch |
| 70 | For one 3/5 pin socket outlet 5/6 Amps on the same board with other switches with cable of size 1.5 Sqmm nominal area |
| 71 | For one 3/5 pin socket outlet 5/6 Amps independent board with cable 1.5 Sqmm nominal area |
| 72 | For one 3/6 pin socket outlet 15/16 Amps independent Board with cable of size 2.5 sqmm nominal area. |
| 73 | Material and labour for submain wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm (Nominal area) drawn through in and including PVC conduit/casing caping with all fittings and accessories as required at site alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces all as specified and as directed. NOTE :- (a) Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length. |
| 74 | Description all as item no 73 above but for 2.5 sqmm size |
| 75 | Description all as item no 73 above but for 1.5 sqmm size |
| 76 | Supply and fix 5 Amp switch Piano flush type single pole one way all as specified and as directed. |
| 77 | Supply and fix socket flush type 6 amps, 5 pin, 230v all as specified and as directed |
| 78 | Supply and fix switch piano, flush type single pole, one way 16 Amp all as specified and directed |
| 79 | Supply and fix socket out let 2 in 1, 3 pin 6 and 16 Amp flush type all as specified and directed. |
| 80 | Supply and fix ceiling rose surface bakelite three terminal all incl dismantling taking down unsv one complete all as specified and as directed. |
| 81 | Supply and fix sheet metal enclosure SPN 04 way (MCB DB) Double door, 240 Volts AC complete all as specified and as directed. |
| 82 | Supply and fix Sheet metal Enclosure SPN 08 way (MCB DB) Double door, 240 Volts AC complete all as specified and as directed. |
| 83 | Supply and fix MCB DB double door 4 way ETPN with 200 Amps rated bus bar 240 volts complete all as specified and as directed. |
| 84 | Supply and fix MCB TPN 40-63 Amps, 415 volt 10 KA complete all as specified and as directed. |
| 85 | Supply and fix MCB, SPN (Double Pole) 32 amps, 240 Volts, 10 KA ‘’C” curve complete all as specified and as directed. |
| 86 | Supply and fix MCB, Single Pole, 5 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve complete all as specified and as directed. |
| 87 | Supply and fix LED Light batten 20 watt ,4 feet AC, PF-0.95 (min), sleek and seamless profiled extruded aluminium batten with an efficient diffuser to illuminate work and retail spaces with three core flexible copper conductor cable from ceiling rose complete all as specified and as directed.MAKE :- Wipro cat part No-LL22-511-XXX-65-G1 or techno commercial equivalent in CG/Philips |
| 88 | Supply and fix LED Light batten 10 watt, 2 feet AC, PF-0.95 (min), sleek and seamless profiled extruded polycarbonate batten with an efficient diffuser to illuminate work and retail spaces with three core flexible copper conductor cable from ceiling rose complete all as specified and as directed. MAKE :- Wipro cat part No-LL20-111-XXX-65NE3 or techno commercial equivalent in CG/Philips/Havells |
| 89 | Supply and fix LED building security light 45 watt, 230V, with lens, PF > 0.95 complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener all as specified and as directed. MAKE :- CG Cat Part No-TRP-415-45-57-SL-LM-NBK or techno commercially equivalent in Philips/Wipro. |
| 90 | Supply and fix in replacement Wall fan 400 mm sweep, 3 speed control, PVC body 230 volts all as specified and as directed. |
| 91 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. NOTE :- Old UNSV ceiling fan deposit to MES store |
| 92 | Supply and fix recess mounted LED panel, 36 watt ( 2'x2'), highly efficient suitable for celing complete with all fixing accessories and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable incl dismentling taking down unsv fitting any type all as specified and as directed. Make-CG cat part no -TCR-145-36-65-SL-NWH or techno commercially equivalent in Havells/Wipro |
| 93 | Material and labour for PVC insulated, PVC sheathed twin core 1100 volts grade, 04 sqmm aluminium stranded conductor (incl PVC conduit/wire guard where required) complete all as specified and as directed. |
| 94 | Material and labour for earthing complete with galvanised steel pipe electrode, 40 mm bore, medium grade, 3 mtr long buried directly and vertically in ground with top edge at ground level after making bore hole of size not less than 300 mm dia and 3.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified bldg), connected with galvanised steel earthing lead of 4mm dia all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2with RCC precast pit cover slab 400mm x 400mm x80mm with handle for lifting made out of 8mm dia MS rod, funnel, wiremesh, 15 mm dia light grade GI tubing for protection of GI wire 4mm dia, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion. Please Enable Macros to View BoQ information |