|
| 1 | M&L for taking down cement or cement lime plaster any description incl racking out joints, hacking for key , scrubbing down with water etc including removal of debrish from the MOD land complete all as specified and directed. |
| 2 | M& L for 15 mm thick rendering on block masony or concrete surfaces in CM 1:6 on internal walls at any height, finished even and smooth without using extra cement and all as specified. |
| 3 | M& L for 10 mm thick rendering on ceiling surfaces in CM 1:3 on finished even and smooth without using extra cement and all as specified. |
| 4 | M&L for 15mm thick rendering on block masonry of concrete surface in CM 1:4 on external wall at any height, finished even and smooth without using extra cement complete all as specified and directed. |
| 5 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of oil emulsion distember white or tinted including removing existing nails, if any, any nos and filling the disturbed surface/holes making smooth surface as directed by engr-in-charge. |
| 6 | M&L for preparation of new surface of ceiling and applying two coat of applying two coats of oil emulsion distemper white or tinted over a coat of primer complete all as specified and directed |
| 7 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer, white or tinted, upto 20 m height from ground leven all as directed. |
| 8 | M&L for complete removal of old treatment by scrappings from walls and applying one coat of primer on plastered surfaces prepatatory to distempering and applying two coats of oil emulsion distemper white or tinted including removing of all nails etc complete all as specified and directed by Engineer-in-Charge |
| 9 | M&L for complete removal of old treatment by scrappings from walls and applying one coat of primer on plastered surfaces prepatatory to distempering and applying one coats of oil emulsion distemper white or tinted complete all as specified and directed by Engineer-in-Charge |
| 10 | M&L for preparation of old plastered or unplastered surfaces of wall and applying one coat of white wash complete all as specifed and directed. |
| 11 | M&L for preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specifed and directed. |
| 12 | M&L for preparation of old painted steel surfaces of any description not otherwise described exc. 10 cm in width or girth and applying one coat of synthetic enamel paint white or tinted by using spraying mechanism and to be executed by approved applicator complete all as specified and directed. |
| 13 | M&L for preparation of old wooden surfaces of any description not otherwise described exc. 10 cm in width or girth and applying one coat of synthetic enamel paint white or tinted by using spraying mechanism and to be executed by approved applicator complete all as specified and directed. |
| 14 | M&L for anti-termite treatment along external wall below concrete or plinth protection or masonry apron or flooring using chemical emulsion @ 2.25 litres per linear meter including drilling and plugging holes etc. In apron complete all as specified and directed. |
| 15 | M&L for At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed. |
| 16 | M&L for writing letters of figures (Block Roman, Italic or Indian) n. Exc. 30cm high for qtrs number/ Bldg Numbers as per directed by Engr-in-charge |
| 17 | M&L for complete removal of existing treatment of walls and applying one coats of cement base paint over a coat of primer,with alkali resistant priming paint or tinted,upto 12 m height from ground leven all as directed.Note:- Necessary formwork required will not paid seperatly. Please Enable Macros to View BoQ information |