|
| 1 | Schedule 'A' |
| 2 | M & L for preparation of old decorated plastered or unplastered surfaces and applying one coat of white wash on wall and cleaning premise clean & tidy complete all as spec and dir by Engineer-in-Charge. |
| 3 | M & L for preparation of old decorated plastered or unplastered surfaces and applying one coat of white wash on ceiling complete all as spec and dir by Engineer-in-Charge. |
| 4 | M & L for preparation of old decorated plastered or unplastered surfaces and applying one coat of colour wash on wall. |
| 5 | M & L for the preparation of old decorated plastered surface of wall and applying one coat of plastic emulsion coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade complete all as specified and directed. |
| 6 | All as per above item No 4.00 but on ceiling |
| 7 | M&L for preparation of old surfaces of walls, chajjas and projections etc by washing scrapping rubbing down and stopping of painted surfaces and applying one coat of first quality weather proof acrylic paint exterior grade complete all as directed by Engineer-in-Charge and as per manufacturer's instruction complete all as specified. |
| 8 | M&L for Preparation of old decorated surfaces of walls by complete removal of existing treatment and applying one coat of wall care putty and applying two coats of oil bound distemper over a coat of primer on walls complete all as specified and directed. |
| 9 | M & L for preparing of old distempered surface of wall and applying one coat of oil emulsion distemper complete all as spec and directed. |
| 10 | All as per above item No 8.00 but on ceiling |
| 11 | M & L for preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed. |
| 12 | All as per above item No 10.00 but on steel surface |
| 13 | M & L for prepration of old decorated surface of wall and applying one coat of cement base paint complete all as specified & directed. |
| 14 | M & L for preparation of old surfaces of wood flooring of any description over 10cm width or girth and applying finishing coat of wooden varnish complete all as specified & directed. |
| 15 | Cutting ,cleaning and removing bushes,grass and small plants grows on roof surface,top and corner of parapets and chajjas etc nexc 30cm in height complete all as specified and directed. |
| 16 | M & L for preparation of old painted surfaces and applying one coat of synthetic enamel on brick, stone, concrete, asbestos cement or plaster surface all as specifed and directed. |
| 17 | M & L for complete removal of existing treatment of wall and preparation of old plastered or Unplastered surface of wall and applying two coats antifungal exterior emulsion paint over a coat of resin primer (100% acrylic) in Camouflage pattern including scafolding as per approved design complete all as specified and directed. |
| 18 | M & L in repairs Granules textured homogeneous wall finishing consisting of a two component system of dry granules (25 kg per pack) made of 92% silica particles coated with fade resistant pigments, 100% acrylic polymer bonding agent (5 kg per pack) with the applied thickness of coating between 0.8mm-1.2mm on a cured, smooth level plaster without keying, as per the shades / combinations approved, to be applied by and approved applicator of the manufacturer, as per the directions / supervision of the Engineer-in-Charge. The above textured coating should confirm to surface spread of flame class one of BS 476:Part 7 :1971 and pull off strength of the coating meet JISA 6909 on smooth plastered surface. |
| 19 | Taking down cement plaster from brick or concrete surface incl raking out joints hacking for key and scrubbing down with water complete all as specified. |
| 20 | M & L for rendering 10 mm thick on stone masonry surfaces or surface other than fair faces of brick work in CM 1:6, finished even and smooth w/o using extra cement |
| 21 | M & L for preparing of newly plastered surface of walls and applying one layer 1 mm of white wall care putty and two coats of oil bound distemper over a coat of primer etc complete |
| 22 | M & L for rendering 5 mm thick in CM 1:3 on ceilings finished even and smooth without using extra cement. |
| 23 | M & L for preparing of new plastered surface and applying three coats of white wash in ceiling |
| 24 | M & L for rendering 15 mm thick in CM 1:4 backing coat mixed with WPC (@ 3% by weight of cement) finished even and fair on stone masonry surfaces as specified. |
| 25 | M & L for preparing of newly plastered surface of walls and applying two layers of Cement Based paint over a coat of primer complete all as specified and directed. |
| 26 | M & L for Preparation of new plastered surfaces in walls soffits, facia roof and applying Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. at any height including necessary scaffolding etc complete all as specified and as directed by Engr-in-Charge of weather coat primer all as specified. |
| 27 | Repairing the damp wall by removing the existing putty till plaster level from skrting to the affected area covering an aditional 0.3 meter distance across all sides of affected area. The smartcare hydroloc is applied on plaster by brush ensuring the material goes inside the pores/intersites. The first coat( no dilution) is applied with a forced coverage 3.7 -4.2 Sqm/L area from skirting to the affected area, covering an additional 0.3 meter distance across all sides of affected area. Allow it to dry for 6-8 hrs. The second coat ( no dilution) applied with coverage of 3.7 -4.2 Sqm/L perpendicular to first coat. Allow it to dry for 6-8 hrs. After it has dried water proofing putty is applied. Now the surface is prepared by sand paper to receive the colour over it complete all as specified and directed by Engineer-in-Charge. |
| 28 | Taking down chowkats or frame of any description n exc 1.5 Sqm each (without taking off shutters from the frames) removing to or from store complete as specified and directed. |
| 29 | S & F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications and drawings complete all as specified and directed. |
| 30 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing complete all as specified and directed by Eng-in-Charge. |
| 31 | Taking down shutters and re-fixing in the same opening of shutters of any description exc 1 sq and n exc 2 sqm each complete all as specified and directed. |
| 32 | Taking down shutters of description exc 1 sqm and not exc 2 sqm each complete all as specified and directed. |
| 33 | Taking down chowkats or frame of any descrip tion exc 1.5 Sqm each and n.exc 4 Sqm (without taking off shutters from the frames) complete as specified and directed. |
| 34 | S & F 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed |
| 35 | S & F, 35mm thick, second class HW in glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed by Eng-in-Charge. |
| 36 | S & F 35mm thick 2nd class hardwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mmB.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed |
| 37 | S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to wooden door Shutters/aluminium sliding shutters complete all as specified and directed. |
| 38 | M & L for preparation of new wooden surface of any description n. exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as all as specified and directed. |
| 39 | S & F 250mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy. |
| 40 | S & F 150mm size, aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 41 | S & F aluminium, anodised barrel tower bolt of extruded section and fixed 150 mm of size |
| 42 | S & F butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed. |
| 43 | S & F SS butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed. |
| 44 | S & F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as all as specified and directed. |
| 45 | S & F in repairs, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to wooden door Shutters/aluminium sliding shutters with required beading complete all as specified and directed. |
| 46 | Taking down chowkats or frame of aluminium window/ ventilator n exc 1.5 Sqm each (without taking off shutters from the frames) removing to or from store complete as specified and directed. |
| 47 | S& F powder coated aluminium frame and shutters for doors, windows, ventilators with one or more rebates including joining cleat and necessary fitting (handle, locking arrangement, stoppage) for fixing etc (minimum thickness of powder coating 50 micron) complete all as specified and directed. |
| 48 | S & F 4.0 mm thick Sheet glass, ordinary quality with and including neoprene beadings in square exc 0.5 sq.m in each pane as specified and directed. |
| 49 | S & F 12 mm Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber or metal frame complete all as specified and directed |
| 50 | S & F in repair for 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work with screws to timber frame work with magnetic locks complete all as specified and directed. |
| 51 | M & L for Hacking out old broken glass exc 1.5 Sqm (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads |
| 52 | S & F 4.0 mm thick Sheet glass, ordinary quality with and including neoprene beadings in square nexc 0.5 sq.m in each pane as specified and directed. |
| 53 | S & F in repair powder coated aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 104 or equivatent 6.5 mm thick all as specified and as directed. |
| 54 | S & F in repairs, 250mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cost or extraded sections and fixing bolts and sliding bolts of extraded sections or cost aluminium alloy. |
| 55 | S & F in repairs, 150mm size, aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 56 | S & F in repairs, aluminium, anodised barrel tower bolt of extruded section and fixed 200 mm of size |
| 57 | S & F in repairs, 150mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel springcomplete all as specified and directed. |
| 58 | S & F in repair 25mm dia Stainless Steel curtain rod etc complete all as specified and directed |
| 59 | S & F in repair 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as all as specified and directed. |
| 60 | S & F in repairs mortice lock of mild steel, vertical type of size 75mm with duplicate key for door complete all as specified. |
| 61 | S & F in repairs, Door closer hydraulically regulated of aluminium (extruded section) body, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 0.61 to 0.80 kg and fixed complete all as specified and directed. |
| 62 | S & F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup Washers |
| 63 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 64 | S & F hollow PVC wall lining/paneling consisting of 5-7mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame with 5 mm PVC fillet of width 35 mm for wall panelling for fixing to wall to make PVC frame as per specified and directed. |
| 65 | M & L for suspended ceiling with prepainted calcium silicate board 5-6 mm thick of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600x600mm, with aluminium snap grid framework and hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified. |
| 66 | M&L for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, including hangers and hanging arrangements, including providing and fixing 12 mm thick seamless calcium silicate ceiling board made out of 1800 x 1200mm size board, comprising of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having Philips head with under head cutter at minimum spacing of 200mm centre to centre, including fnishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tap to provide seamless finish and multi layer design complete all as specified and directed. |
| 67 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 68 | M & L, Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm(600x600 mm) , in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete as specified and directed. |
| 69 | M & L, Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm(600x600 mm) , in skirting, dado set & jointed in net cement slurry and pointed in white or coloured cement to match over and including 10 mm thick screed bed in CM 1:4 complete as specified and directed. |
| 70 | M & L, Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm(400x400 mm) , in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete as specified and directed. |
| 71 | M & L, Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm(400x400 mm) , in skirting, dado set & jointed in net cement slurry and pointed in white or coloured cement to match over and including 10 mm thick screed bed in CM 1:4 complete as specified and directed. |
| 72 | M & L coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm (300x300 mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete as specified and directed. |
| 73 | M & L for coloured glazed ceramic tiles of size 450 x 300 x 7mm thick on vertical surface such as skirting/dado, set and jointed in net cement slurry and pointed in colour cement to match ver 15 mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 74 | M & L for vitrified ceramic tiles light shade 9-10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm but including 600 x 600mm size in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 75 | M & L for vitrified ceramic tiles light shade 9-10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm but including 600 x 600mm size as in dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 76 | Dismantling stone slab and tiles of any description or thickness in floors,aprons etc. |
| 77 | M & L for udaipur green marble slab 15-16mm thick machine cut in platform including cutting and polishing, moulding edges over and including 15 mm thick CM in 1:6 screed bed complete all as specified and directed. |
| 78 | M & L for machine cut kota stone slab flooring 18-22 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc and including 15mm thick screed bed in CM 1:6 complete as specified and directed. |
| 79 | M & L for kota stone slab 18-22 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 80 | M & L for 15-18mm thick black granite stone slab machine cut in skirting/dado, cooking platform, jams, pillars, windows cills and the like laid over and including 10mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed. |
| 81 | M & L for rounding to edges of stone slabs two edge full round,such as in steps,cooking platform and other similar situation complete all as specified and directed. |
| 82 | S & F 12 mm Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes writing words required. |
| 83 | Demolition of cement concrete (Concrete of any description andin any position not otherwise specifically provided for |
| 84 | M & L for PCC (1:4:8) type D2 using 40 mm graded stone agg 75 mm thick as in sub base to floor complete |
| 85 | M & L for chequered cement concrete tiles 30cmx30cmx25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in cm (1:6) complete all as specified. |
| 86 | S & F in repairs 15mm bore, fancy type Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or unioncomplete all as specified and directed. |
| 87 | S & F in repairs bibtap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe 15mm bore chromium plated (fancy type) all as specified. |
| 88 | S & F in repairs pillar tap, cast copper alloy, with capstan head, chromium plated scrwed down high pressure with or without letter 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe of bore 15mm all as specified. |
| 89 | M & L for Writing letters or figures (Block Roman, Italic or Indian) n exc. 30 cm high |
| 90 | M&L for Preparation of old surfaces of walls, chajjas and projections etc by washing scrapping rubbing down and stopping of painted surfaces and applying one coat of first quality weather proof acrylic paint exterior grade in coumoflauge pattern complete all as directed by Engineer-in-Charge and as per manufacturer's instruction complete all as specified. |
| 91 | Cleaning and removing all scale and dirt etc from tanks & from mouths of circulating pipes etc of service water/loft tanks in / over roof buildings at different locations of capacities as under: |
| 92 | Capacity exceeding 250 but not exceeding 500 litres each |
| 93 | Capacity exceeding 501 litres but not exc 1000 litres each |
| 94 | Capacity exceeding 1001 litres but not exc 2000 litres eachNote for item No. 90:1. The contractor will write date of cleaning& next due date of cleaning on Tank as directed by the Engr-in-Charge.2. At the time of cleaning disconnected pipes/fittings shall be reconnected as per existing to make it leak proof complete all as directed by the Engr-in-Charge. |
| 95 | S & F in repair 10 litres PVC valveless, syphonic action type flushing cistern, with inlet ball valve, float and handleincloding brackets and PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified |
| 96 | S & F in repairs 25mm Ball (float) valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron/pvc/cpvc pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) |
| 97 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measuredoverall as fixed along the centre line over fittings and accessories) |
| 98 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of nominal bore 110mm of pressure rating 6kgs / cm2 in repair / replacement complete all as specified and directed. |
| 99 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of nominal bore 75mm of pressure rating 4kgs / cm2 in repair / replacement complete all as specified and directed. Please Enable Macros to View BoQ information |