|
| 1 | Demolition of brick work built in cement mortar including all quoions, arches pillar etc complete all as specified and directed. |
| 2 | M&L brick work with sub class \\"B\\" old size bricks, straight or curved on plan exec 6m mean radius built in CM 1:6 complete all as specified and directed by the Engineer-in-Charge |
| 3 | Taking down cement plaster on wall existing surface complete all as specified and directed. |
| 4 | M & L for rendering 15 mm thick on fair face of brick walls or concrete surface in CM 1:4 complete finished even and smooth without using extra cement all as specified and directed. |
| 5 | M & L for rendering 10 mm thick on fair face of brick walls or concrete surface in CM 1:6 complete finished even and smooth without using extra cement all as specified and directed. |
| 6 | M & L preparation of new plastered surfaces on walls and applying two coats of cement base paints complete all as specified and directed by Engineer-in-Charge |
| 7 | M & L preparation of new plastered surfaces on walls and applying two coats of OBD over a coat of primer complete all as specified and directed by Engineer-in-Charge |
| 8 | Dismantling floor, hearth or wall tilling including cement mortar bedding(but not backing), and rubbish off premises etc complete all as specified and directed. |
| 9 | M & L for 15mm thick screed bed or bedding layer of cement mortar 1 : 6 for laying tiles |
| 10 | M & L for vitrified ceramic tiles 9-10mm thick light shade (square/rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 11 | M & L for non skid ceramic coloured tiles 7-8 mm thick 400 x 400 mm rectangular tile in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment complete all as specefied and directed by Engineer-in-Charge. |
| 12 | M & L for 10mm thick backing coat of cement mortar 1 : 3 for laying tiles |
| 13 | M & L for vitrified ceramic tiles 9-10mm thick light shade (square/rectangular) polished, area of each tiles not exc 0.36 sqm in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 14 | M & L for glazed ceramic tiles 200 x 300 mm/300 x 450mm in vertical surface and jointed in neat cement slurry and pointed in white cement mixed with colour pigment over complete all as specefied and directed |
| 15 | S&F in repair GI water tubing/pipe 15 mm bore with alll fittings fixed to wall or laid in floors or celings including taking out old rusted pipes in any position compete all as specified and directed |
| 16 | S&F in repair GI water tubing/pipe 20 mm bore with alll fittings fixed to wall or laid in floors or celings including taking out old rusted pipes in any position compete all as specified and directed. |
| 17 | blank |
| 18 | S & F in repairs 15mm CP sink cock with 150mm (6'\\") long swivel spout & wall flange. Make Cera or equivalent with Cat Part No F1018251 |
| 19 | S & F in repairs 15mm CP angle cock with wall flange. Make Cera or equivalent with Cat Part No F1018201 |
| 20 | S & F in repairs 15mm CP 2 way angle cock with wall flange. Make Cera or equivalent with Cat Part No F1018211 |
| 21 | S & F in repairs 15mm CP 2 way bib cock with single handle & wall flange. Make Cera or equivalent with Cat Part No F1018151 |
| 22 | S & F in repairs overhead rain shower SS 150mm dia (6\\"). Cera or equivalent with Cat Part No F7010211SS |
| 23 | S & F in repairs 15mm health faucet ABS body with 1 Mtr SS braided connection pipe. Cera or equivalent with Cat Part No F8030105AB |
| 24 | S & F in repairs towel rail 600mm (24\\"). Cera or equivalent with Cat Part No F5007103 |
| 25 | S & F in repairs towel ring. Cera or equivalent with Cat Part No F5007105 |
| 26 | S & F in repairs 110 mm PVC (SWR) Pipes single socketed in any length with rubber ring joints fixed to wall and floors. |
| 27 | S & F in repairs soap dish. Cera or equivalent with Cat Part No F5007106 |
| 28 | S & F in repairs paper holder with flap guard. Cera or equivalent with Cat Part No F5007110 |
| 29 | S & F in repairs ball brass valves, high pressure, with polythelne float and fly nut in 20mm bore complete all as specified and directed. |
| 30 | S & F in repairs corner glass shelf (large) 300 x 300mm (12\\" x 12\\"). Cera or equivalent with Cat Part No F5005103 |
| 31 | S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed |
| 32 | Dismantling water tanks of 500 Ltrs capacity |
| 33 | S & F Rotational moulded polethelene water storage tanks in 500 litres capasity (cylinderical vertical & triple layer with closed top) hoisted and fixed in position all as specified in SSR Pt-I complete, ISI marked, all as specified and directed. |
| 34 | S & F in repairs waste coupling (full thread) 32mm. Cera or equivalent with Cat Part No F8050101 |
| 35 | S & F in repairs kitchen sink bowl manufactured from 0.8mm thick 202 grade SS. Size 455 x 405mm (18\\" x 16\\"), Depth 203mm (8\\"), Gloss Finish. Cera or equivalent with Cat Part No B4621105 |
| 36 | S & F in repairs 15mm CP bib cock with nozzle and flange. Make Prayag or equivalent with Cat Part No 7305 |
| 37 | S & F in repairs 15mm CP 2 way bib cock with flange. Make Prayag or equivalent with Cat Part No 7312 |
| 38 | S & F in repairs concelated stop cock 15mm with flange. Make Prayag or equivalent with Cat Part No 7318 |
| 39 | S & F in repairs 110mm PVC (SWR) 'P' trap |
| 40 | S & F in repairs 110mm PVC (SWR) 'S' trap |
| 41 | S & F in repairs vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm, white, with integral foot rests complete including provision of lime concrete bedding and connection to trap, & to flushing pipe, anti-syphonage pipe, etc, complete including making good to floor |
| 42 | S & F in repairs vitreous china wash down water closed pan (pedesstal pattern/EWC), white with fixing bolts, trap, including connection to drain (or outgoing pipe) & to flushing pipe, antisyphonage pipe, etc, seat and cover complete |
| 43 | S & F in repairs white 10 Ltrs PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipe complete |
| 44 | S & F in repairs wash hand basin, vitreous china (flat back or angle back type) 550x400mm size, including cutting for and pinning in ends of brackets or erecting stand including brackets complete all as specified and directed by Engr-in-Charge |
| 45 | S & F in repair 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 46 | S & F PVC (SWR) 75mm pipes single socketed in any length with rubber ring joints fixed to walls and floors |
| 47 | S & F in repair grating doom 100mm dia of PTMT (Min weight 25 gms) |
| 48 | S & F in repair PVC connection pipe 15mm size with PTMT nuts of length 600mm |
| 49 | S & F in repair PVC connection pipe 15mm size with PTMT nuts of length 750mm |
| 50 | S & F in repairs flush pipes of polythylene of low or high density or PVC, 32mm dia for low level cistern to pedestal pan, including all joints |
| 51 | S & F in repairs flush pipes of polythylene of low or high density or PVC, 32mm dia for low level cistern to squatt pattern closet including all joints and making good to the floor |
| 52 | S & F in repairs PVC waste pipe |
| 53 | S & F in repairs SS plate rack of size 787 x 762 x 254mm of 0.60mm thickness fixed with necessary fixing arrrangements including neessary fasteners, screws etc. Make Bluestar or equivalent with Cat Pat No SSKPR-314 |
| 54 | Dismantling water tanks of 1000 Ltrs capacity |
| 55 | S & F Rotational moulded polethelene water storage tanks in 1000 litres capasity (cylinderical vertical & triple layered with closed top) hoisted and fixed in position all as specified in SSR Pt-I complete, ISI marked, all as specified and directed. |
| 56 | Dismantling existing 500 Ltrs water tanks, setting aside, cleaning and removing all scale and dirt etc, from tanks and from mouths of circulating pipes etc and re-fixing in position all as directed and specified by Engr-in-Charge |
| 57 | Dismantling existing 1000 Ltrs water tanks, setting aside, cleaning and removing all scale and dirt etc, from tanks and from mouths of circulating pipes etc and re-fixing in position all as directed and specified by Engr-in-Charge |
| 58 | Taking down chowkhat with shutter without taking off shutter from chowkhat of any description not exceeding 1.5 Sqm each complete all as specified and directed |
| 59 | Ditto all as above but exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed. |
| 60 | Taking down Shutters of any description n exc 1 sq. m each complete all as specified and directed |
| 61 | Taking down Shutters of any description exc 1 sqm but n. exc. 4.00 sqm each complete all as specified and directed |
| 62 | S & F steel windows with side hung shutters including projecting type hinges with steel handle and peg stay complete with glazing bars, dovetailed or welded |
| 63 | Ditto, all as above but without glazing bars |
| 64 | S & F steel window or ventilator fixed type with glazing bars etc complete all as specified |
| 65 | M&L for PCC type B-1 (1:2:4) 20 mm graded aggregate as in concrete for fixing holdfasts for bed blocks etc complete all as specified and directed |
| 66 | Dismantling MS work of any description not otherwise provided for complete all as specified and directed |
| 67 | S & F MS framed work such as grills, gratings, frames,holdfast etc with ends of bars shouldered and or riveted or forgot into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work |
| 68 | S & F 1.0mm thick MS steel plain black sheet in hearth covering to door shutters covering to door chowkats (frames) chullahhoods, watertanks, water throughs, ducts, urinal troughs and funnel etc cut to size beaded if directed holes punched including round headed screws clout nails or rivets and fixed to wood or steel members etc with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitread angles stooped ends outlets etc as required complete all as specified and directed |
| 69 | S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed . |
| 70 | S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – I 2009 and as directed by Engineer-in-Charge |
| 71 | S&F Aluminum anodised barrel tower bolt of extruded section and fixed 125 mm long complete all as specified and directed . . |
| 72 | S&F 150mm size extruded aluminium alloy handles, fabricated type,anodised complete all as specified and directed . . |
| 73 | S&F 250mm aluminium alloy, anodised,sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing boltts and sliding bolts of extrude section or cast aluminium complete all as specified and directed . . |
| 74 | S&F Butt hinges, heavy weight, cold rolled mild steel, and fixed 75mm long complete all as specified and directed . |
| 75 | S&F rolled mild steel framed work Fe 410-W (Gde- E- 250) quality- A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete |
| 76 | S & F for pressed steel door frames of size 105 x 60mm for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate etc complete |
| 77 | S & F for pressed steel door frames of size 125 x 60mm for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate etc complete |
| 78 | M & L for PCC type C-1 (1:3:6) using 12.5mm graded stone aggregate as in filling of hollow pressed steel frame etc complete |
| 79 | S & F second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 80 | S & F 35 mm thick 2nd class hard wood glazed and skelton door shutter, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for scuring glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified |
| 81 | S & F 30mm thick flush door shutters solid core construction, with block board core and plywood face panels, commercial type on both side fixed to chowkhat all as specified and directed . |
| 82 | S & F 35mm thick plain framed and panelled shutter (any number of panels) with panels of timber flat on both sides (feather edged) or veneered particle board medium density, wood particle board with commercial face veneers and fitted to chowkatsflush door shutters solid core construction, with block board core and plywood face panels, commercial type on both side fixed to chowkhat all as specified and directed . |
| 83 | S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 84 | Hacking out old broken glass from metal frame including punching or drilling out old glazing complete all as specified and directed. |
| 85 | M & L for 4mm thick plain sheet glass ordinary quality including glazing with putty area area n.exc 0.5 Sqm in each pane |
| 86 | S&F in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 87 | S&F butt hinges medium weight cold rolled mild steel 100mm size, ISI marked all as specified. |
| 88 | S&F Aluminum barrel tower bolt 200mm complete all as specified and directed |
| 89 | S&F aluminium anodised 300mm long sliding door bolt with hasp and staple (bolt type) and fixing clip and bolt extrude section or cast alloy type all as specified and directed. |
| 90 | S & F 300mm MS ordinary rat tail rod pattern springs, incl roller and roller plate complete |
| 91 | M & L for preparation of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer |
| 92 | M & L for preparation of steel or steel based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer |
| 93 | M & L for running welding in repairs of metal n.exc 9mm thick members complete |
| 94 | M & L floor door stopper of aluminium alloy body and tongue, anodized with rubber washer at bottom fixed with screw to body and fixed to door shutter, over all length of cover plate shall be 140 mm complete all as specified and directed. |
| 95 | S&F in repair stainless steel curtain rod 25 mm dia incl. brackets and curtain rod holders of suitable size at ends etc complete all as specified and directed |
| 96 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) any thickness, including cover fillets etc complete all as specified and directed. |
| 97 | S & F grid false ceiling in GI system powder coated prelude main runner section 38 x 24 x 0.40mm, cross 'T' 28 x 24 x 0.40mm, wall angle 24 x 24 x 0.40mm and including providing and fixing 4mm thick non asbestos fibre fire resistant cement building board/designer E-Board with all finishes size 595 x 595mm fixed in ceiling frame work with all necessary hanging washers, expansion holding fasteners etc for securing framework to ceiling wherever required complete all as specified and directed. |
| 98 | S & F 12 mm thick gypsum plaster board flame proof conforming to IS-2095 1982 to fix as suspended celling with on step and including frame consisting perimeter channe I 20X27X30.5 mm intermediate channel 45 (WEB) X 1. 5 ( flange ) X 0.9 mm @ 1.22 M C/C with ceiling angle 2 5 X10X0.5 MM fixed to soffit with GI cleat and steel expansion fastner , celing section 51.5 ( Knurled web X 26 ( flange) with lips of 10.5 mm X 0.5mm @ 610 mm C/C nec clip , screw , nylon sleeves etc complete and apply two coats of oil bound distemper over a coat of 1mm thick putty on celling over preparation surface complete all as specified and directed. |
| 99 | Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ.(ii) Make of material shall be as per mentioned in Particular specifications or Appendix 'B' to Particular specifications as approved by AGE (I) AF manauri Please Enable Macros to View BoQ information |