|
| 1 | 1) Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer in-charge |
| 2 | 2) Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 3 | a) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 4 | b) Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 5 | 3) Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : |
| 6 | a) All kinds of soil (i) Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 7 | 4) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 8 | a) 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 9 | b) 1:5:10 (1 cement : 5 coarse sand(zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 10 | 5) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 11 | a) 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded brick aggregate 40 mm nominal size) |
| 12 | 6) Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 13 | a) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 14 | 7) Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 15 | a) 300x16 mm |
| 16 | b) 250x16 mm |
| 17 | 8) Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 18 | a) 300x10 mm |
| 19 | b) 150x10 mm |
| 20 | 9) Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 21 | a) 125 mm |
| 22 | 10) Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : |
| 23 | (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. |
| 24 | (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. |
| 25 | (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.) |
| 26 | 11) Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. |
| 27 | 12) Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 28 | 13) 12 mm cement plaster of mix : |
| 29 | a) 1:6 (1 cement: 6 fine sand) |
| 30 | 14) 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 31 | a) 1:6 (1 cement: 6 fine sand) |
| 32 | 15) 6 mm cement plaster of mix : |
| 33 | a) 1:3 (1 cement: 3 fine sand) |
| 34 | 16) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 35 | a) Two or more coats on new work. |
| 36 | 17) Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 37 | a) Old work (one or more coats) |
| 38 | 18) Finishing walls with water proofing cement paint of required shade : |
| 39 | a) Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. |
| 40 | 19) Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. |
| 41 | a) With cement mortar 1:4 (1 cement : 4 fine sand). |
| 42 | 20) Removing glass panes from windows and replacing them with new glass panes with putty and nails wherever necessary : float glass panes of thickness 4mm |
| 43 | a) For windows in ground floor and /or for windows which can be accessed from inside of the room / bolcony with a ladder. |
| 44 | b) for windows in upper floors ( other than ground floor ) up to 10 floors with necessary Jhoola arrangement |
| 45 | 21) Charges for minor Repairs to wooden panelled/flush doors / window setc., . Cost includes all labour for attending minor repairs like sides planing for proper functioning and refixing screws after attending necessary repairs etc., with necessary screws, nails etc., complete (Cost of wood will be paid separately, but i/c required screws ) - Wooden door / window/Cupboards |
| 46 | 22) Cleaning of canopy/ chajjas by removing leaves grass dust, rubbish and other deposited / accumulated materials etc including removal of blockages/ chockages of khurras/ spouts of terrace/chajjas etc by disposal of rubbish to the dumping ground out side periphery of the building. |
| 47 | a) Blocked chajas, in accessible canopy & like upto First floor level . |
| 48 | b) Blocked chajas, inaccessible canopy & like Above first floor level . |
| 49 | 23) Charges for Cleaning of terrace slab, rain water entry spouts, khurras/ depressions/ sunk slabs and surrounding areas etc., by removing leaves, silt, grass, dust, rubbish, small plants and other deposited / accumulated materials from terrace etc., for smooth flow of water including disposal of waste etc., complete as per the directions of Engineer-in-Charge. (entire Terrace of one building shall be measured as one unit for payment). |
| 50 | 24) Providing and fixing CP brass two way bib cock of approved brand and manufacture - 15mm nominal bore. |
| 51 | 25) Uprooting & removal of vegetation at walls/ roofs/ chajjas and floors/ drainage systems/ water supplying stream of the building/over head tanks or at all levels, any location and applying any special chemical to defective area to prevent vegetation growth and finishing the same with cement concrete/ mortar to match the surface of walls/ floors/ roofs., etc complete as per the directions of engineer-in-charge (cement concrete/ mortar to be paid in separate item.) (Uprooting of vegetation in each location will be measured as one job) |
| 52 | a) Up to floor two level |
| 53 | Above floor two level |
| 54 | 26) Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : |
| 55 | a) W.C. pan with ISI marked white solid plastic seat and lid |
| 56 | 27) Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. |
| 57 | 28) Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 58 | a) Orissa pattern W.C. pan of size 580x440 mm |
| 59 | 29) Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 60 | a) One urinal basin |
| 61 | 30) Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
| 62 | a) Rectangular shape 453x357 mm |
| 63 | 31) Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 64 | a) 100 mm inlet and 75 mm outlet (i) PVC of approoved brand |
| 65 | 32) Providing and fixing PVC health faucet with 1.5m long PVC hose of approved brand and manufacture and of approved shade - 15mm |
| 66 | 33) Removing the damaged sanitary and water supply fittings and replacing them with new fittings including necessary white lead/ lead wool etc complete as directed by the Engineer - in - charge. |
| 67 | a) P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete - Semi rigid pipe : (i) 32 mm dia. |
| 68 | b) PTMT Waste Coupling of approved brand for wash basin and sink, of approved quality and colour. (i) 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. |
| 69 | c) Unplasticised PVC connection pipe 15 mm nominal dia and 45 cm long with brass unions : |
| 70 | 34) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 71 | a) 20 mm nominal outer dia. Pipes. |
| 72 | b) 25 mm nominal outer dia .Pipes. |
| 73 | c) 40 mm nominal outer dia. Pipes. |
| 74 | 35) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work |
| 75 | a) 40 mm nominal outer dia. Pipes. |
| 76 | 36) Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : |
| 77 | a) 25 to 40 mm nominal bore |
| 78 | 37) Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 79 | a) 15 mm nominal bore |
| 80 | 38) Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 81 | a) 45 cm length (i) 15 mm nominal bore |
| 82 | 39) Providing and fixing PVC. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 83 | a) 20 mm nominal bore |
| 84 | b) 25 mm nominal bore |
| 85 | c) 40 mm nominal bore |
| 86 | 40) Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 87 | 41) Providing and fixing PTMT bib cock of approved quality and colour. |
| 88 | a) 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 89 | 42) Providing and fixing PTMT stop cock of approved quality and colour. |
| 90 | a) 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 91 | 43) Providing and fixing PTMT grating of approved quality and colour. |
| 92 | a) Rectangular type with openable circular lid. (i) 150 mm nominal size square 100 mm diameter of the inner hinged round grating. |
| 93 | 44) Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 94 | a) 75 mm |
| 95 | b) 110 mm |
| 96 | 45) Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. |
| 97 | a) 25mm nominal bore. Weighing not less than 62 gms. |
| 98 | 46) Providing, laying and jointing unplasticised PVC Eco-drain pipes of Type SN4 of Supreme Make or Equivalent conforming to IS : 16098, including joints & fittings with one step CPVC solvent cement, with solvent weld and rubber sealing rings including filling alround pipes up to required thickness with Stone dust/ robo sand/ river sand & testing of joints complete as per direction of Engineer in Charge. |
| 99 | a) 75 mm diameter |
| 100 | b) 100 mm diameter |
| 101 | 47) Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: |
| 102 | a) 100x100 mm size P type (i) With Sewer bricks conforming to IS : 4885 |
| 103 | 48) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with M.S hold fast/ lugs/ SS dash |
| 104 | fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variationin profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 105 | a) Frame size 50 x 100 mm |
| 106 | 50) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. |
| 107 | (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 108 | a) 30 mm thick |
| 109 | 51) Replacing existing damaged sanitary pipes by providing UPVC SWR soil waste and vent pipes by cutting, removing, replacing with working pressure 6kgf/sq.cm conforming to IS : 13592 Type B including jointing with 'T' shaped seal/rubber ring conforming to IS : 5382 and with solvent cement or rubber lubricant as the case may be with pipes of outer dia (concealed pipe joints to be jointed with rubber ring and solvent cement and exposed joints to be jointed with rubber ring and rubber lubricant. (i)Single socketed pipe(couplings,other accesories will be paid seperately) |
| 110 | a) 110mm diameter |
| 111 | b) 75mm diameter |
| 112 | 52) Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : |
| 113 | a) Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : |
| 114 | (i) With common burnt clay F.P.S. (non modular) bricks of class designation 3.5 |
| 115 | 53) Extra for depth for manholes |
| 116 | a) Size 90x80 cm (i) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 117 | 54) Replacing existing on wall face damaged unplasticised - PVC moulded fittings/ accessories with new fittings/accessories for unplasticised Rigid PVC SWR pipes conforming to IS : 13592 Type A including cutting,replacing,jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. |
| 118 | a) Plain bend of required degree |
| 119 | (i) 110mm bend |
| 120 | (ii) 75mm bend |
| 121 | b) Tee with door |
| 122 | (i) 110X110X110 |
| 123 | (ii) 75X75X75 |
| 124 | c) Door bend |
| 125 | (i) 110mm |
| 126 | (ii) 75mm Please Enable Macros to View BoQ information |